板料成形极限理论与实验研究进展

成形极限是板材成形领域中重要的性能指标和工艺参数。文章在阐述成形极限在板料成形中的意义的基础上,综述并分析了成形极限在理论和实验方面的研究进展。成形极限图受应变路径的影响,给工业生产应用带来极大不便。以极限应力构成的成形极限应力图不受应变路径的影响,作为复杂加载路径的成形极限判据更加方便和实用。FLSD研究与FLD相结合,成为精确地确定破裂判别准则的主要途径之一,是近来研究的热点。十字形双向拉伸是实现复杂加载路径有效实用的试验方法。最后对成形极限应力图和十字形双向拉伸试验需要解决的关键问题作了阐述。     

Ag-Pd-5Ru-Gd四元系部分相图的700℃等温截面

在Ag Pd Gd ,Ag Pd Ru ,Ag Ru Gd和Pd Ru Gd三元系合金相图的基础上 ,采用X射线衍射 ,差热分析、扫描电镜和显微金相分析等方法研究了Ag Pd Ru Gd(x(Ru) =5 % ,x(Gd) <2 5 % )四元系相图的 70 0℃等温截面。结果表明 :该截面上包含有 2个单相区 ,即Pd(Ag)和Pd3 Gd ;4个两相区 ,即Pd(Ag) (Ru) ,Pd(Ag) Pd3 Gd ,(Ru) Ag51Gd14 ,(Ru) Pd3 Gd ;3个三相区 ,即Pd(Ag) Pd3 Gd (Ru) ,Pd(Ag) Ag51Gd14 (Ru) ,Pd3 Gd Ag51Gd14 (Ru) ;1个四相区 ,即Pd(Ag) Pd3 Gd Ag51Gd14 (Ru)。未发现新的四元中间相     

Application of Graham scan algorithm in binary phase diagram calculation

Graham scan, a computational geometric algorithm for finding a two-dimensional convex hull, is introduced to calculate binary phase diagrams. This algorithm is modified and applied to find the convex hull of discrete points in the space of Gibbs energy vs mol fraction. The modified Graham scan algorithm has a very low computational cost, which improves efficiency in binary phase diagram calculation.     

PHASE DIAGRAM OF Nd-Pd(Nd≤50at.-％) BINARY SYSTEM

采用X射线衍射,示差热分析和金相等方法研究了Nd-Pd系相图中含0—50at-％Nd的区域。发现在该区域内存在6个金属间化合物:NdPd_5,NdPd_3,NdPd_2,Nd_2Pd_3,Nd_1Pd_5和NdPd。其中,NdPd_3,Nd_4Pd_5和NdPd是固液共熔化合物。还测出NdPd_5为SmPt_5型结构,NdPd_?为AuCu_3型结构,低于708±4℃的NdPd为CrB型结构。在该区域内共有3个共晶反应和3个包晶反应。     

Determination of isothermal section of Fe-Ti-Zr ternary system at 1173 K

Phase relations in the Fe-Ti-Zr ternary system at 1173 K were investigated by means of diffusion-triple approach together with electron probe microanalysis（EPMA） technique. A series of tie lines and tie-triangles were determined and the isothermal section at 1 173 K was established, which consists of four three-phase fields： β（Ti, Zr）＋FeZr2＋FeTi, FeZr2＋FeTi＋Fe2Zr, FeTi ＋Fe2Zr ＋Fe2Ti and Fe2Zr ＋Fe2Ti ＋Fe. The results show that the largest solubility of Ti in Fe2Zr is about 11.3 %（mole fraction） and the solid solubility of Ti in FeZr2 is about 26.9%, the solid solubility of Zr in Fe2Ti is about 8.1% and the solid solubility of Zr in FeTi is 7.2%. The binary compound FeZr2 is nearly a linear compound. No ternary compound is found.     

Determination of phase equilibria in the Ni-Ta-Zr system at 1223 K

The phase equilibrium relations of the ternary Ni-Ta-Zr system at 1223 K were investigated by means of diffusion triple and electron probe microanalysis (EPMA) techniques. Two ternary compounds were found and a series of tie lines and tie triangles have been determined. The maximum solubility of Ta in NiZr2 is about 13.5% (atom fraction). The corresponding tentative isothermal section at this temperature was constructed based on current experimental information.     

Solid-state phase equilibria in the Gd–Co–Al ternary system at 1173 K

A portion of the isothermal section (1173 K) of the phase diagram of the Gd–Co–Al ternary system (up to 33.3 at.% Gd) were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersion spectroscopy (EDS) techniques. Fourteen single-phase regions (including solid solution regions of the binary compounds), twenty-five two-phase regions and twelve three-phase regions were found to exist at this isothermal section. In the GdCo₂–GdAl₂ system, the existence of the GdCo_0.74Al_1.26 phase is identified and it has a composition range of 30–45 at.% Al, the maximum solid solubility of Al in GdCo₂ is about 15 at.%, and Co in GdAl₂ is about 16 at.%. Besides, the maximum solid solubility of Al in Co, Gd₂Co₁₇ and GdCo₅ is about 6, 17 and 25 at.%, respectively, the maximum solid solubility of Gd in Co, CoAl is below 2 at.% and the solid solubility range is from 47 to 61 at.% Al in CoAl phase. In this work, no new ternary compounds were observed.     

基于梯形图方法的全气动装弹机械手设计

介绍了基于梯形图设计方法的全气动装弹机械手的设计,重点探讨了在设计中考虑气缸运行位置检测、手动及自动切换、急停处理等实用问题.采用两位三通阀扩充方法来解决单一行程阀多次切换分区条件的难题,利用梭阀实现手动和自动操作的配合,通过增加一个中继阀来实现急停处理.     

Phase diagram of R-Fe-Co pseudoternary system with R≤33.3%(mole fraction,R=Sm0.5Dy0.5)

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｔｗｏｓｕｃｃｅｓｓｆｕｌｆａｍｉｌｉｅｓｏｆｒａｒｅ ｅａｒｔｈｃｏｂａｌｔｐｅｒｍａｎｅｎｔｍａｇｎｅｔｓｐｒｏｄｕｃｅｄｃｏｍｍｅｒｃｉａｌｌｙａｒｅＳｍＣｏ5ａｎｄＳｍ2 Ｃｏ17.ＴｈｅＳｍＣｏ5ｍａｇｎｅｔｓｈａｖｅｂ     

���������Ѽ��Ե�����鷽��

 本文提出了一种基于直接冲击电压对电器绕组匝间绝缘的试验方法。用电压波形比较法，把冲击电压经高速切换，交替施加于被测绕阻两端和参考物绕组两端，通过观察电压衰减振荡波形的变化，便可检测被测绕组的匝间是否有异常。