A finite element parametric study on the mechanical properties of J-shaped steel hysteresis devices

The present paper discusses the mechanical properties of J-shaped steel hysteresis devices, abbreviated to “J-dampers”, interposed between the upper structure of a spatial structure and its substructure. The mechanical properties of a J-damper, which are characterized by its key geometrical and material parameters, are evaluated through parametric analyses using an in-house Finite Element program. The hysteresis behavior of a J-damper is also modeled by a bi-linear elasto-plastic hysteresis model with the strain-hardening effect. Its elastic stiffness, yield strength and dimensionless hardening ratio, which are expressed as functions of the parameters, are formulated on the basis of mathematical models and the results of parametric studies. Finally, some remarks relevant to the application of the proposed hysteresis model are made for the design of the J-damper.     

A novel laboratory bench for practical evaluation of catalysts useful for simultaneous conversion of NOx and soot in diesel exhaust

This study deals with the development of a laboratory bench for the practical evaluation of catalysts that are useful for the direct conversion of NO_x and soot in the exhaust of diesel engines. The employed model exhaust is generated by using a diffusion burner with additionally dosing some gaseous components to the burner gas to obtain a realistic feed composition. The produced soot is extensively characterized by employing thermogravimetry, transmission electron microscopy, N₂ physisorption and temperature programmed techniques. The results of the different characterization methods show that the present soot is suitable for the intended catalytic investigations. The simultaneous conversion of NO_x and soot is examined like in practice, i.e. the soot is separated from the tail gas by a diesel particulate filter (DPF) that is coated with the catalyst. The deposited soot is then catalytically converted by NO_x and O₂ to form N₂ and CO₂. The conversions of NO_x and soot are measured by exclusively applying gas analysers, whereby a special experimental procedure is developed to determine the soot removal. Hence, additional soot related analytics are not required. To show the suitability of the constructed bench a Pt/Fe₂O₃/β-zeolite sample is taken as test catalyst that is reported to be very active in NO_x/soot reaction. The measurements performed with and without catalyst clearly show the effect of the used sample in simultaneous NO_x/soot conversion. We therefore consider the constructed laboratory bench to be a useful tool for testing and ranking catalytic materials.     

新型细粒煤分选设备的研究及应用

提出了一种新的细粒煤分选设备,主要介绍了它的结构模型、数学模型、动力学分析以及在贵州老屋基、孝义东兴、山西五阳、黑龙江七台河矿务局等洗煤厂中在煤泥脱水回收作业中的应用,取得了较好的效果。尤其用于简易选煤厂,从煤泥水中回收低灰精煤,既解决了环保污染问题,又取得了较高的经济效益,因而倍受欢迎。     

Growth of CeO_2, Y_2O_3 Buffer Layers for YBCO Coated Conductor

~~Growth of CeO_2, Y_2O_3 Buffer Layers for YBCO Coated Conductor     

循环荷载作用下饱和黏性土的弹塑性双面模型

基于作者新近提出的一种混合塑性硬化准则和临界状态土力学理论建立了一个三维形式表述的适于饱和黏性土的弹塑性双面模型,此硬化准则是著名的M asing方法在三维应力空间中的推广。该模型的二维形式已采用饱和黏性土样室内动态三轴不排水剪切试验的结果进行了验证并已在另文发表。本文所建的三维弹塑性动本构模型与一个半经验的孔隙水压力增长模式相结合,通过有限元程序ABAQUS*对一个循环荷载作用下的条形基础下部地基土层内的位移、应力分布和超孔隙水压力随时间的变化进行了分析,计算结果表明模型预测的地基土的力学响应是符合实际的。     

4-(N-异丙氨基)-苯甲酸的合成研究

对分子中既具有吸电子基,又具有给电子基的化合物4-(N-异丙氨基)-苯甲酸进行了合成,具体的合成步骤和反应条件为:50mL水中加入3g(0.022mol)对氨基苯甲酸,再加入无水碳酸钾1.5g(0.011mol),调整pH约为8,使成羧酸盐,经过滤后加入2-溴丙烷2.5g(0.02mol),加热回流12h,直至下层的2-溴丙烷基本消失,冷却,得灰白色固体,重结晶并用活性炭脱色,得白色晶体4-(N-异丙氨基)-苯甲酸。     

网上协作学习模式研究

主要针对网上协作学习的基本模式、实现方式和存在的问题进行了初步研究。     

驱动AM-OLED的2-a-Si:H TFT的设计与制作

a-Si：H／SiNx：H TFT在长时间栅偏应力作用下，会产生阈值电压漂移，这主要是由绝缘层电荷注入和有源层亚稳态产生而引起的。针对电荷注入现象，文章首先通过控制源气体SiH4和NH3流量的不同，利用PECVD制作了不同N／Si比（0．87～1．68）的氮化硅绝缘材料，对其进行了椭偏、红外和光电子散射能谱（EDS）测试。制作了不同的MIS结构电容，对其进行老化实验和C-V测试分析，结果表明稍富氮（N／Si比稍大于标准Si3N4的化学计量比1．33）的氮化硅做成的M1S样品在老化前后C-V曲线偏移不是很明显，表明其缺陷态密度相对较小，能够有效减小半导体／绝缘层界面间的电荷注入。设计了驱动OLED的2-a-Si：H TFT像素电路及其阵列版图，优化了电路中的几个关键参数，即T1的W／L=2．5、T2的W／L=25和存储电容Cs=0．8pF。运用7PEP生产工艺，制作了13cm（5．2in）的TFT阵列样品。对TFT进行I-V特性测试，其开态电流为10μA，开关比为10^6；对AMOLED显示屏样品进行了静态驱动下的亮度测试，其最高亮度为341cd／m^2。     

Simulation of cup-cone fracture using the cohesive model

The cohesive model is used for the prediction of the crack path during stable crack extension in ductile materials. The problem of crack-path deviation is investigated by means of simulation of crack propagation in a round tensile bar. The respective phenomenon is known as cup-cone fracture. It is shown that the model is able to predict the failure mechanism, which consists of normal fracture in the center and combined normal/shear fracture in the so-called “shear lips” at the specimen’s rim. The damage evolution and crack path predicted by the model are presented. The effect of the normal and shear failure parameters on the crack-deflection point and several aspects of the finite element mesh are discussed.     

电视节目制作中的压缩格式

电视节目制作系统中存在着几种格式的压缩问题 ,对几种压缩方式及其优缺点进行了分析。