可编程控制器应用于铁合金电炉配料系统

介绍了用于热兑法配料系统的可编程序控制器的组成、料批重量误差补正、控制方法，并介绍系统的应用程序。     

矿业软件在矿产储量评价中的应用

矿产储量评价的基本内容是建立矿床地质模型进行品位估计和储量分类分级．地质控制条件限制是矿床建模的重要手段。地质统计学方法是矿块品位估计以及储量分级等的有效方法．国内的应用实例表明。国际先进矿业软件是矿产储量评价的先进工具，应用矿业软件进行矿产储量评价是市场经济的需要。     

湛江电厂1号发电机定子冷却水处理方式的改造

简述发电机铜导线腐蚀机理,湛江电厂1号发电机定子冷却处理方式改造前后各自的特点。比较新旧两种方式水质处理效果、安全性、经济性。采用超净化装置后,解决了原来处理方式的所有缺点,水质达到质量标准, 创造良好的经济效益,值得推广改造和借鉴。     

Integrated Evaluation and Its Application on Decision-Making of Comprehensive Transportation Projects

The comprehensive transportation project involves with many different transportation methods, such as railway, highway, waterway, airline, and pipeline, which have their special characteristics. To evaluate the transportation project with different transportation methods under the same system, the integrated evaluation method should be built up on the basis of a common index system. This paper suggests a feasible integrated evaluation method including index system establishing, indices transacting, the index weight distributing, and weighted value integrating.     

Note on filon-type integration for higher order exponential time differencing methods in stiff systems

The Filon-type quadrature is efficient for highly oscillatory functions — Fourier transforms. Based on Cox and Matthews’ ETD schemes, the higher order single step exponential time differencing schemes are presented based on the Filon-type integration and the A-stability of the two-order Adams-Bashforth exponential time differencing scheme is considered. The effectiveness and accuracy of the schemes is tested. Foundation item: Projects(02JJY2006, 03JJY2001) supported by Natural Science Foundation of Hunan Province; project supported by JSPS Fellowship Research Program     

Synthesis of γ-Al2O3 nanoparticles by chemical precipitation method

Highly pure active γ-Al2O3 nanoparticles were synthesized from aluminum nitrate and ammonium carbonate with a little surfactant by chemical precipitation method. The factors affecting the synthesis process were studied. The properties of γ-Al2O3 nanoparticles were characterized by DTA, XRD, BET, TEM, laser granularity analysis and impurity content analysis. The results show that the amorphous precursor Al(OH)3 sols are produced by using 0.1 mol/L Al(NO3)3 ·9H2O and 0.16 mol/L (NH4)2CO3·H2O reaction solutions, according to the volume ratio 1.33, adding 0.024% (volume fraction) surfactant PEG600, and reacting at 40 ℃, 1 000 r/min stirring rate for 15 min. Then, after stabilizing for 24 h, the precursors were extracted and filtrated by vacuum, washed thoroughly with deionized water and dehydrated ethanol, dried in vacuum at 80 ℃ for 8 h, final calcined at 800 ℃ for 1 h in the air, and high purity active γ-Al2O3 nanoparticles can be prepared with cubic in crystal system, O7H-FD3M in space group, about 9 nm in crystal grain size, about 20 nm in particle size and uniform size distribution, 131.35 m2/g in BET specific surface area, 7-11 nm in pore diameter, and not lower than 99.93% in purity.     

氮化硅晶须的研究现状

介绍了晶须的生长机理、氮化硅晶须的制备方法以及影响其生长的因素。阐述了氮化硅晶须增强复合材料的现状,指出加强晶须的基础研究,改进制备技术和降低成本是今后的发展方向。     

KDON-170/350型全低压流程空分设备的操作

简述了KDON 170 /35 0型全低压流程空分设备的操作原理、操作方法和操作依据 ,并探讨了实行间断制氧的可行性     

Sol-Gel Synthesis and Luminescent Characteristic of Doped Eu^3 ＋ Silicate-Silica Phosphor

Silicagelphosphorsdopedrareearthionshave attractedgreatattentionofmanyresearchersdueto theseadvantages,suchashighersamplehomogeneity,purityandstable,efficientandenvironmentallyfriend lyphotoluminescencematrixmaterials,whichisless toxicleadtonetconversione…     

Free Vibration Analysis of Laminated Stiffened Shells

The free vibration of the laminated composite anticlastic doubly curved stiffened shells is investigated using the finite element method. The stiffened shell element is obtained by appropriate combination of the nine-node doubly curved isoparametric thin shallow shell element with the three-node curved isoparametric beam element. The shell forms include the hyperbolic paraboloid, hypar, and conoidal shells. The accuracy of the formulation is validated by comparing the authors’ results of specific problems with those available in the literature. The additional problems are taken up for parametric studies to include the effects of fiber orientation and lamina stacking sequence of shells and stiffeners. Moreover, the effects of number, types, and orientations of stiffeners, and stiffener depth to shell thickness ratio on the fundamental frequency are also included in the present study. Further, mode shapes corresponding to the fundamental frequency for typical cases are obtained to verify the parametric trend of the results of the fundamental frequency.