马尾松木材中性脱脂工艺的研究

采用全因素试验法，对马尾松木材进行过热乙醇溶液脱脂处理，以获取马尾松木材高效脱脂工艺技术。试验结果显示：（1）脱脂温度对马尾松松脂溶出量的影响极显著，且溶出量随着脱脂温度的升高而增大；（2）脱脂时间对马尾松松脂溶出量的影响极显著，且溶出量随着脱脂时间的延长呈先增大后减小的趋势；（3）脱脂浴比对马尾松松脂溶出量的影响极显著，且溶出量随着脱脂浴比的延长呈先增大后减小的趋势；（4）利用过热乙醇溶液对马尾松木材进行脱脂，其最佳工艺是脱脂时间为130℃、脱脂时间为8h、浴比1：8。     

Electrochemical mass transfer between an impinging jet and a rotating disk in a confined system

This paper presents the mass transfer results from an impinging liquid jet to a rotating disk. The mass transfer coefficients were measured using the electrochemical limiting diffusion current technique (ELDCT). Rotational Reynolds number (Re_r) in the range of 3.4 × 10⁴–1.2 × 10⁵, jet Reynolds number (Re_j) 1.7 × 10⁴–5.3 × 10⁴ and non-dimensional jet-to-disk spacing (H/d) 2–8 were taken into consideration as parameters. It was found that the jet impingement resulted in a substantial enhancement in the mass transfer compared to the case of the rotating disk without jet.     

高层地下室底板混凝土施工的裂缝控制

以德益花园写字公寓楼地下室底板205m厚混凝土的施工工程为例，坚持预防为主的原则，采取了一系列温控技术措施，有效地防止或控制了温度裂缝(收缩裂缝)的产生，确保了混凝土的施工质量。     

Analysis of Multiphase Flow and Heat Transfer: Pressure Buildup in an Unsaturated Porous Slab Exposed to Hot Gas

This study develops a mathematical model for coupled heat and mass transfer in an unsaturated porous slab exposed to a flowing hot gas. Effects of the initial saturation conditions on associated variables, i.e., total pressure, temperature, moisture content, and multiphase flow, are studied. The Newton-Raphson method based on a finite volume technique is applied. This study emphasizes the influence of initial saturation level and gravitational effect in heat and multiphase flow phenomena associated with this system. Gravity enhances the downward flow of liquid within the porous slab. Pressure buildup occurs near the interface between the wet and the dry zone. However, it appears that the order of magnitude to the total pressure is small. This study explains the fundamental mechanism of multiphase flow that involves heat and mass transfer in a heated unsaturated porous slab.     

高温季节大体积混凝土基础施工的裂缝控制

文章以上海富华大厦工程为例,对在高温季节如何针对大体积混凝土基础施工的裂缝进行控制,提出了相关措施,达到了控制裂缝的预期目标。     

某铁路医院加速器室大体积防射线混凝土施工

结合大同铁路分局中心医院直线加速器室工程实际，介绍了大体积防射线混凝土的特点及施工中应注意的事项，并阐述了具体的施工技术。     

洞穴——从微中子研究到地下空间规划

微中子研究需要很大很深的洞穴，以便在没有太多宇宙射线噪音的情况下捕获重要事件。大型的自然洞穴往往出现在喀斯特石灰岩地区，少数大型洞穴也会出现在矿区，而民用洞穴则被广泛用作发电站、火车站、仓库及其他用途。应力控制被认为是在洞穴深挖中消除巨大应力的普遍方法。如果能够在大型洞穴使用应力控制方法，我们就可以建造安全的洞室来进行微中子研究；从另一方面来讲，大而浅的洞穴也能解决城市规划的很多问题。     

常压渣油热反应过程中胶体的稳定性

利用质量分数电导率方法研究了中东和克拉玛依常压渣油在热反应过程中胶体的稳定性。结果表明，随着反应时间的增长，在热反应生焦诱导期内，渣油的胶体稳定性迅速下降；开始生焦后，胶体稳定性缓慢下降。从中东常压渣油的SARA四组分的数均相对分子质量、碳氢元素组成、平均芳碳率等方面探讨了中东常压渣油在热反应过程中胶体稳定性下降的原因。结果表明，在热反应中，由于裂解和缩聚反应的共同作用，使渣油的沥青质和饱和分含量上升，芳香分含量下降，胶质含量变化不大；随着热反应的进行，四组分的数均相对分子质量均呈下降趋势，导致了渣油胶体稳定性的下降并发生生焦反应。     

The Difference in Turbulent Diffusion between the Active and Passive Scalars in a Thermally Stably Stratified Medium

The difference in the turbulent diffusion between the active (heat) and passive (mass) scalars in a thermally stably stratified medium is investigated. The axisymmetric problem is treated on the formation of a turbulent circulation flow above a heated disk and on the turbulent diffusion of a passive scalar (impurity) from a continuous surface source in a stably stratified medium. The results indicate that the thermal stratification causes appreciable differences in the coefficients of turbulent transfer between the active (heat) and passive (mass) scalars. This means that the assumption of the identity of the coefficient of turbulent diffusion of heat and mass, employed in conventional models of turbulence, produces significant errors in estimating the heat and mass transfer in a thermally stably stratified medium.     

A Mixed-Approach Analysis of Deformations in Pipe Bends. Part 3. Calculation of Bend Axis Displacements by the Method of Initial Parameters

A problem of deformation of a curved shell loaded by internal pressure, axial force, and temperature difference is discussed. Physical equations are derived whereby the displacements and angles of rotation of the line of centers of mass of cross sections of a shell are related to loading parameters. A general constitutive set of equations for a curved element during its deformation is given. Using a method of initial parameters, an analytical solution is obtained for the differential equations for displacements and angles of rotation of the center line allowing for the action of distributed forces and moments.