Edwards曲线快速标量乘算法研究

标量乘法是椭圆曲线密码算法中最核心的运算,其运算速度影响着整个密码体制的实现效率。首先,详细地介绍了Edwards曲线的基本概念。其次,为了提高标量乘法的运算速度,针对椭圆曲线标量乘算法进行了研究,引入了一种可以用来计算连续倍点2◢△mP◣的算法CDA。为了提高CDA的计算效率,提出了将标量◢k◣表示为4-NNAF形式以减少◢k◣的长度,再结合CDA计算标量乘法可以有效地减少运算量。最后根据算法的运算量分析和具体例子得出,减少标量◢k◣长度后的计算效率提高了13%以上。为了进一步加快运算速度,又提出了对CDA中乘法运算和模逆运算采用并行结构来减少标量乘法的运算次数。计算结果表明,并行后的计算效率提高了36%以上。     

MDX1060型X-荧光分析仪的应用与实践

甘肃祁连山水泥股份有限公司从英国牛津仪器公司引进的MDX1060型X-荧光分析仪于2001年11月投入使用，经过2年的调试和维护，掌握了影响其测试稳定性和准确性的各种因素(包括样品制备质量、设备维护技术、工作曲线和测试操作水平等)及其克服这些因素影响的技术措施，从而实现了该公司生产原材料和生科、熟料化学组成CaO，SiO2，Al2O3，Fe2O3，MgO，SO3，K2O和Na2O的快速准确测定，为提高生料配料质量和熟料质量提供了可靠的技术参数。     

十二烷基－二甲基（2－羟基）乙基氯化铵系列季铵盐的缓蚀性能

通过失重法和极化曲线、线性极化两种电化学方法，研究了十二烷基二甲基（２－羟基）乙基氯化铵（１２２）、十四烷基二甲基（２－羟基）乙基氯化铵（１４２）和十六烷基二甲基（２－羟基）乙基氯化铵（１６２）对２０＃碳钢在５％盐酸中的缓蚀作用。并与新洁尔灭（十二烷基二甲基苄基溴化铵）进行了比较。结果表明，它们在酸性介质中具有很好的缓蚀作用。     

孔雀绿分光光度法测定炭素制品中微量铅的研究

采用分光光度法来测定炭素制品中微量铅的含量。经比较实验确定了该方法最佳的实验奈件。该方法操作简便、快速、检出限低、灵敏度高，是检测微量铅含量一种较理想的方法。     

A visual study on flame behavior in tone-excited non-premixed jet flames

A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes, which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude; one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame, an elongated flame, and an in-burning flame. Particular attention is focused on an elongation flame, which is associated with a turnabout phenomenon of vortex motion, and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong positive pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.     

双活性基活性染料真丝绸染色工艺研究

双活性基活性染料用于真丝绸染色有诸多影响因素：缚酸剂用碳酸氢钠比碳酸钠的固色率高用量在2％～4％，pH为8～9时最为合适：染色温度从60℃升到85℃时固色率提高3％～8％，超过85℃时易造成“灰伤”．当元明粉的用量从30g／l升到60g／l时上染率和固色率提高10％。随着浴比的增加，其固色率会有不同程度的降低，在实验条件下，浴比为1：40最好。通过上染曲线，讨论了染色过程的控制。     

工业PTA氧化过程4-CBA浓度的模糊神经网络模型

A fuzzy neural network (FNN) model is developed to predict the 4-CBA concentration of the oxidation unit in purified terephthalic acid process. Several technologies are used to deal with the process data before modeling.First,a set of preliminary input variables is selected according to prior knowledge and experience. Secondly,a method based on the maximum correlation coefficient is proposed to detect the dead time between the process variables and response variables. Finally, the fuzzy curve method is used to reduce the unimportant input variables.The simulation results based on industrial data show that the relative error range of the FNN model is narrower than that of the American Oil Company (AMOCO) model. Furthermore, the FNN model can predict the trend of the 4-CBA concentration more accurately.     

Visual Analysis of Trajectories in Multi‐Dimensional State Spaces

Multi‐dimensional data originate from many different sources and are relevant for many applications. One specific sub‐type of such data is continuous trajectory data in multi‐dimensional state spaces of complex systems. We adapt the concept of spatially continuous scatterplots and spatially continuous parallel coordinate plots to such trajectory data, leading to continuous‐time scatterplots and continuous‐time parallel coordinates. Together with a temporal heat map representation, we design coordinated views for visual analysis and interactive exploration. We demonstrate the usefulness of our visualization approach for three case studies that cover examples of complex dynamic systems: cyber‐physical systems consisting of heterogeneous sensors and actuators networks (the collection of time‐dependent sensor network data of an exemplary smart home environment), the dynamics of robot arm movement and motion characteristics of humanoids.     

Adaptive multi‐scale analysis for point‐based surface editing

This paper presents a tool that enables the direct editing of surface features in large point‐clouds or meshes. This is made possible by a novel multi‐scale analysis of unstructured point‐clouds that automatically extracts the number of relevant features together with their respective scale all over the surface. Then, combining this ingredient with an adequate multi‐scale decomposition allows us to directly enhance or reduce each feature in an independent manner. Our feature extraction is based on the analysis of the scale‐variations of locally fitted surface primitives combined with unsupervised learning techniques. Our tool may be applied either globally or locally, and millions of points are handled in real‐time. The resulting system enables users to accurately edit complex geometries with minimal interaction.