最优化分析使网络电路输出功率最大

用最速上升法分析具有多负载的有源线性网络电路,使其输出功率最大,它可以为电子器件端口的合理布置提供最优数据。     

瀑布沟工程的水文分析计算

本文简要的介绍了瀑布沟工程水文分析计算主要依据站的选定和基本资料的插补延长,以及径流、洪水的分析计算方法.在可行性研究阶段水文成果(通过审查)和新设立的毛头码水文站所取得的数年水文资料的基础上,将初设阶段对可行性研究阶段的水文分析计算方法和成果进行验证和补充的情况重点予以介绍.     

Equilibrium solubility of CO2 in rubbery EVA over a wide pressure range: effects of carbonyl group content and crystallinity

The equilibrium CO₂ sorption isotherms and isobars for rubbery EVA containing various amounts of vinyl acetate (VA) over a wide pressure range 10-340 atm and 25-52 °C were investigated. The normalized CO₂ sorption concentration (in cm³ (STP) CO₂/mole VA) isotherms of these polymers as a function of pressure consisted of two distinct regions turning at near P_c. The normalized sorption isotherms in these two distinct regions could be fairly described by two respective power laws: C=K_aP^n_a for above P_c and C=k_bP^n_b for below P_c. The normalized CO₂ sorption isotherms were found to be about the same for four EVA samples having different VA contents for below P_c, suggesting that the sorption process at below P_c may be mainly driven by the presence of carbonyl groups. At above P_c, the degree of crystallinity of the polymer appeared to be a major factor to affect the sorption process, with the higher the degree of crystallinity, the lower the normalized CO₂ sorption concentration in the polymer. The sorption isobars of the polymer as a function of temperature were governed by the interplay of density, viscosity, and diffusivity of CO₂ depending on the pressure studied.     

权力及正确权力观的标志

权力是统治阶级的权力,是统治阶级统治力量和意志的体现,是为统治阶级的利益服务的。在社会主义社会,权力是人民的权力。保证权力的人民性必须有相应的权力运行机制,在根本上则取决于领导干部树立正确的权利观,坚持为民执政、为民勤政、为民廉政。     

红外加热节能技术的现状与发展前景

本文综述了国内外节能的现状与发展趋势,论述了远红外电加热领域的发展前景,强调了加强基础理论研究的重要性,介绍了我国红外加热应用的领域和国外新开发的红外产品。     

乌江渡水电站扩建工程开挖爆破对原水电站建筑物震动影响的控制研究

为确保原有的乌江渡水电站水工建筑物和发电设备以及扩建工程建筑物的施工安全,加快扩建工程施工进度,本扩建工程施工中对关键部位开挖所产生的爆破震动影响实施全面而有效的实时爆破监控,并根据监控成果的研究指导开挖爆破作业,以确定符合实际的安全爆破震动参数。     

特大型地下厂房岩壁梁锚杆和混凝土施工技术及质量控制

岩壁梁是一种新型结构，为通过一定深度的锚杆将钢筋混凝土梁固定在地下厂房两侧的岩壁上，而吊车荷载则通过锚杆和钢筋混凝土与岩石接触面的摩擦力传到岩体上，形成岩壁梁和岩体共同受力的结构。岩壁梁是地下厂房施工和运行的核心建筑物，岩壁梁锚杆和混凝土的施工质量是直接关系到岩壁梁成败的关键，所以施工技术和施工质量均要求极高，是地下厂房系统施工的重点和难点。本文介绍了瀑布沟水电站地下厂房岩壁梁锚杆和混凝土施工的关键技术及质量控制经验，可供同类工程借鉴参考。     

Silicon power MOSFET at low temperatures: A two-dimensional computer simulation study

Understanding how the structure of the unit-cell affects the cryogenic performance of a Si power Metal Oxide Semiconductor Field Effect Transistor (MOSFET) is an important step toward optimizing of the device for cryogenic operations. In this paper, numerical simulations of the Si power Double Diffused MOSFET’ (DMOS) are performed at room temperature and cryogenic temperatures. Physically based models for temperature dependent silicon properties are employed in the simulations. The performances of power DMOS’ with various unit-cell structures are compared at both room temperature and low temperatures. The effect of the cell structure on the on-resistance and breakdown voltage of the device are analyzed. The simulation results suggest that the device optimized for room temperature operation can be further optimized at cryogenic temperatures.     

中山包水电站钢岔管设计

中山包水电站钢岔管在天生桥二级水电站 6号压力钢管下平段分岔 ,岔管HD值达 15 40m2 ,结构体形复杂 ,采用NK HITEN780A Z35和NK HITEN6 90B高强度钢材制造安装 ,在国内水电工程中实际应用较少。文章着重介绍岔管的布置、结构分析和焊缝的无损检验要求。中山包水电站的正常发电运行 ,为 80kg/mm2 级高强钢在国内水电行业的应用提供了第 3个成功实例     

多功能半导体激光医疗仪电源的研制

根据“多功能半导体激光医疗仪”整机的要求,采用同一电源对667nm和808nm半导体激光器实施供电。为避免电源在开、关机时对半导体激光管产生浪涌冲击,电源在设计中采用了适当的逻辑功能。并可保证对667nm激光器供电时,即使打开808nm激光器供电开关,也不对808nm半导体激光器供电,反之亦然。电源设有手动、计算机两种控制方法,及恒定功率、电流两种工作方式。