水库水温分层对浮式取水口前流速分布的影响

由于目前缺乏对浮式取水口前流场变化规律的研究,以分析水库水温分层对取水口前各断面流速分布影响为目标,依据某水库水温资料,采用k-ε紊流模型对浮式取水口前流场进行三维数值模拟,针对水库水温均一和水温分层的两种情况,研究取水口前流速分布,分析水库水温分层对取水口前各断面流速分布的影响。研究结果表明,在浮式取水口附近,水温均一和水温分层的流速分布存在着差异,这种差距随着取水流量和淹没深度的增大而减小。研究成果可为浮式管型取水设施的应用和运行提供技术支持,为取水水温预测提供理论依据。     

Aplysia sea hare assimilation of secondary metabolites from brown seaweed,Stypopodium zonale

JuvenileAplysia dactylomela were found feeding in abundance on the tropical brown algaStypopodium zonale, a seaweed previously shown to contain numerous unique terpene-quinone natural products. Lipid extracts of these herbivorous mollusks were shown by TLC and HPLC-NMR analyses to contain appreciable quantities of twoS. zonale metabolites as well as one new but closely related compound. Spectroscopic analyses of the new compound in concert with functional group modifications identified this new compound as 3-keto epitaondiol. A careful analysis of the seaweed extract failed to locate this ketone, and thus, it most likely represents anAplysia-biotransformed compound. This is the first clear reported observation of metabolite transfer between an alga of the phylum Phaeophyta and a sea hare.     

2,6-二氯-3-甲基苯胺合成新工艺

通过n-乙酰化保护氨基，氯磺酸与氨水反应在氨基对位形成磺酰胺阻塞基团，再经脱乙酰基，氯化，水解脱阻塞基团，合成2，6-二氯-3-甲基苯胺得到目标产物。与经典文献方法相比，用盐酸代替氢氧化钠脱除乙酰基，用氯酸钠和浓盐酸代替双氧水和浓盐酸或氯气的氯化方法，合成过程中省略了中间产物的分离步骤，以间甲苯胺计总摩尔收率从20％提高到了60．8％，产品纯度大于99．5％。     

2-苯基-1,2-苯并异硒唑-3-(2H)-酮的合成研究

在N2保护下,采用水合肼的碱性水溶液还原硒粉制备了K2Se2,不经分离直接与邻氨基苯甲酸的重氮盐反应得到了中间体2,2'-二硒化苯甲酸;在环合反应合成2-苯基-1,2-苯并异硒唑-3-(2H)-酮(Ebselen)时改用了乙醚-水为反应体系,K2CO3水溶液作为副产物HCl的吸收剂,促使胺解关环反应顺利进行,产物易分离、纯化得2-苯基-1,2-苯并异硒唑-3-(2H)-酮。     

9,9-双(羟甲基)芴的合成工艺研究

以芴为原料，经甲醛羟甲基化反应合成了新型给电子体1，3-双醚的前体，总收率达65％，并对生产工艺进行了优化研究。     

3-氯-4-（2-溴甲基-4-甲基-1，3-二恶戍烷-2-基）苯基-4’-氯苯基醚的合成

3-氯-4-（2-溴甲基-4-甲基-1，3-二恶戍烷-2-基）苯基-4’-氯苯基醚是杀菌剂苯醚甲环唑的一个重要中间体。以2-氯-4-（4-氯苯氧基）-苯乙酮为起始原料，采用溴化和合环同时进行的合成工艺制得该化合物，收率90％．产品含量95％。优化了反应条件，简化了操作。     

Mechanistic Insight in the Ethane Dehydrogenation Reaction over Cr/Al2O3 Catalysts

A Cr/Al₂O₃ alkane dehydrogenation catalyst exhibits a maximum in ethylene yield during an ethane dehydrogenation cycle. Isotopic labelling experiments with monolabelled ¹³C-ethane and deuterium were used to elucidate whether the initial activity increase could be due to formation of an active, larger hydrocarbon intermediate on the surface. The results strongly indicate that this is not the case, and instead point to a traditional reaction cycle involving adsorption of ethane to form an ethyl species, followed by desorption of ethene and hydrogen. Transient kinetic data suggest that ethane adsorption is the rate-determining step of reaction.     

邻二氯苯硝化合成3，4－二氯硝基苯影响因素的考察

邻二氯苯硝化合成３，４－二氯硝基苯影响因素的考察许文松，王庆智（浙江大学化工系，杭州３１００２７）关键词：邻二氯苯，硝化，３，４－二氯硝基苯１前言邻二氯苯（下称Ｏ－ＤＣＢ）硝化的主要产物是３，４－二氯硝基苯（下称３，４－ＤＣＮＢ）。３，４－ＤＣＮＢ经...     

Preparation and characterization of porous carbon beads and their application in dispersing small metal crystallites

Porous carbon beads were prepared by the pyrolysis of poly(vinylidene chloride) beads that were synthesized by suspension polymerization. After prolysis treatment at 180–300 °C under argon stream, the polymeric beads were further carbonized at 1000 °C for 3 h under argon stream to acquire porous carbon beads, of which the specific surface area was about 1000 m²/g, and pore size was mainly in the width range of 0.8–1.2 nm. The carbon structure and surface chemical composition characterized by X-ray diffraction and X-ray photoelectron spectroscopy, depended on the preparation temperature and the relations between them were examined. The characterization of the carbon beads by scanning electron microscopy, atomic force microscopy presented the morphological structure of the carbon beads surface and a global view of pores. The dispersion of nickel crystallites on the carbon beads surface was characterized by electron microprobe analysis. This study reveals that uniform surface morphological structure leads to the fine dispersion of metal crystallites.