SBR工艺发展应用综述

关于SBR工艺的书籍和文章很多。本文在这些资料的基础上整理总结 ,对经典SBR工艺的应用进行了综述 ,归纳了经典SBR工艺的特点 ,介绍了各种新型SBR工艺。     

A Finite Element Computational Method for Gas Hydrate. Part I: Theory

A finite element scheme is presented to model the dissociation of gas hydrates in porous media by hot water injection. We show a complete derivation of the finite element formulation, including the associated mass and energy conservation equations capable of performing transient analysis of both conductive and convective heat transfer for gas and liquid flow in porous media. The scheme also includes the latent heat effect to accommodate the change of phase due to melting of hydrate. In the companion paper, Part II, this method is successfully applied to hydrate reservoirs.     

Changes in polymer foils used in food packaging tested by using differential scanning calorimetry

This work is an experimental study of the differential scanning calorimetry characterisation of polymer materials used in food packaging materials, such as polypropylene (0.03 mm), polyethylene (0.1 and 0.03 mm), poly(D-(-)-Β-hydroxybutyrate) (powder), two-layered polypropylene (0.064 mm), and two-layered polypropylene with poly-vinylidene-chloride (0.012/0.021). The polymer stability was checked by simulation of conditions during food preparation in microwave ovens, sterilisation or rapid freezing. The materials were tested in the temperature range from 40 to 200‡C at different scan rates from 2 to 30°C min⁻¹ during heating or cooling. The enthalpies show a high correlation coefficient (0.964) with scan rate. All samples undergo phase change in the temperature range from 107 to 173°C during heating and enthalpies are in the range from 31.8 to 71.1Jg⁻¹. Upon subsequent cooling from 200°C, the temperature range of phase changes is shifted to lower temperatures from 86 to 102°C with enthalpies ranging from 30.4 to 57.8 J g⁻¹. Experiments with exposure of polymers to microwave radiation and freezing prove that the phase change considering the temperature range is very similar in all experiments.     

Surface structural change of ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V cathode materials at elevated temperatures

LiNi_0.5Mn_1.5O₄ powder was synthesized via sol-gel method and coated with ZnO in order to test the electrochemical cyclability of the material as a cathode for the secondary Li battery in the 5 V range at 55 °C. The ZnO-coated LiNi_0.5Mn_1.5O₄ powder nearly maintained its initial capacity of 137 mA h g⁻¹ after 50 cycles whereas the uncoated powder was able to retain no more than 10% of the initial capacity after 30 cycles. TEM analysis of the cycled cathodes suggests that the formation of the graphitic surface phase, hindering the Li migration, may be responsible for the rapid capacity loss of the uncoated material while no such phase was observed on the surface of the ZnO coated LiNi_0.5Mn_1.5O₄ powder.     

Pathway to health: Cluster-randomized trail to increase fruit and vegetable consumption among smokers in public housing.

Objectives: Examine the effectiveness of an intervention to increase fruits and vegetables (FV) consumption among smokers. Design: Cluster-randomized trial of 20 public housing developments; 10 randomly assigned to an FV intervention and 10 to a smoking cessation intervention. Main outcome measures: Usual (past 7 days) and past 30 days change in daily FV intake at 8 weeks and 6 months postbaseline. Results: Greater increases were seen in the FV group. At Week 8 and Month 6, the FV group had consumed 1.58 (p = .001) and 0.78 (p = .04), respectively, more daily FV servings in the past 7 days than the cessation group. At the same time points, the FV group had consumed 3.61 (p = .01) and 3.93 (p = .01), respectively, more FV servings in the past 30 days than the cessation group. Completing more motivational interviewing sessions (p = .02) and trying more recipes (p = .02) led to significantly greater increases at Month 6 among FV participants. Conclusions: Motivational interviewing counseling and lifestyle modification through trying out healthy recipes may be effective in helping a high-risk population increase their FV intake. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Implementing Information Systems: Some Practical Advice and a Richer Model

Recent research suggests that implementing information systems presents considerable difficulties and that many implementations are total or partial failures. This paper argues that what both practitioners and students require are richer and more acceptable models of information systems implementation. Accordingly, case study data concerning the introduction of manufacturing resource planning (MRP II) are used to illustrate five patterns of behaviour (rites) which capture important social actions; and four components of changing psychological orientation. It is argued that appreciation of the rites and psychological developments identified here will support effective change programmes. Guidelines based on our model are provided for practitioners.     

Hierarchical production control for a flow shop with dynamic setup changes and random machine breakdowns

In this paper, we study a manufacturing system consisting of two machines separated by two intermediate buffers, and capable of producing two different products. Each product requires a constant processing time on each of the machines. Each machine requires a constant non-negligible setup change time from one product to the other. The demand rate for each product is considered to be piecewise constant. Each machine undergoes failure and repair. The time-to-failure and time-to-repair are exponentially distributed random variables. The setup change and processing operations are resumable. We model our system as a continuous time, continuous flow process. An optimal control problem is formulated for the system to minimize the total expected discounted cost over an infinite horizon. To determine the optimal control policy structure, a discrete version of the problem is solved numerically using a dynamic programming formulation with a piecewise linear penalty function. A real-time control algorithm is then developed with the objective of maintaining low work-in-process inventory and keeping the production close to the demand. The algorithm uses a hierarchical control structure to generate the loading times for each product on each machine in real time and to respond to random disruptions in the system. The system is simulated using this algorithm to study its performance. The performance of the algorithm is also compared to alternative policies.     

28Cr2Mo1VA钢变速冷却转变动力学研究

用膨胀法对28Cr2Mo1VA钢测定了变速冷却过冷奥氏体转变动力学曲线,结果表明,先慢冷后快冷,珠光体、贝氏体转变滞后;反之,转变超前。并提出用图解计算法求转变点,结果与实验相符合。     

Continuous formation of slurry ice by cooling water–oil emulsion in a tube

Water-silicone oil emulsion with an additive, (C₂H₅O)₃SiC₃H₆NH₂, was examined as a heat storage material. A spiral tube used as a heat exchanger was immersed in a low temperature bath and the emulsion was circulated in the tube to make ice continuously. Ice was separated from the ice–liquid suspension in an outlet tank. The amount of formed ice, the temperatures of the inlet and the outlet of the heat exchanger, and the temperatures in the tube wall were measured and the overall heat transfer coefficient and the heat flux through the tube were calculated. Experiments were carried out, varying the flow rate, the temperature of cooling brine, and the thickness of tube wall. The condition under which slurry ice was formed continuously without adhesion of ice to the cooling wall was clarified. Though decrease in the thermal resistance of the tube increased the rate of ice formation or raised the brine temperature, it narrowed the range of the flow rate and of the brine temperature in which slurry ice was formed continuously.     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系