火焰发射光谱法联合测定磷矿石和磷精矿中氧化钾及氧化钠

采用双通道的FP-640火焰光度计对磷矿中钾、钠元素进行联合测定试验。试验结果表明：在0．1％～1.0％区间内，K2O的相对标准偏差(RSD)为1．88％～2．93％，回收率为96．6％～102．7％；Na2O的相对标准偏差(RSD)为1．05％～2．10％，回收率为97．3％～101．2％。     

Field Validation of DNDC Model for Methane and Nitrous Oxide Emissions from Rice-based Production Systems of India

The DNDC (DeNitrification and DeComposition) model was tested against experimental data on CH₄ and N₂O emissions from rice fields at different geographical locations in India. There was a good agreement between the simulated and observed values of CH₄ and N₂O emissions. The difference between observed and simulated CH₄ emissions in all sites ranged from −11.6 to 62.5 kg C ha⁻¹ season⁻¹. Most discrepancies between simulated and observed seasonal fluxes were less than 20% of the field estimate of the seasonal flux. The relative deviation between observed and simulated cumulative N₂O emissions ranged from −237.8 to 28.6%. However, some discrepancies existed between observed and simulated seasonal patterns of CH₄ and N₂O emissions. The model simulated zero N₂O emissions from continuously flooded rice fields and poorly simulated CH₄ emissions from Allahabad site. For all other simulated cases, the model satisfactorily simulated the seasonal variations in greenhouse gas emission from paddy fields with different land management. The model also simulated the C and N balances in all the sites, including other gas fluxes, viz. CO₂, NO, NO₂, N₂ and NH₃ emissions. Sensitivity tests for CH₄ indicate that soil texture and pH significantly influenced the CH₄ emission. Changes in organic C content had a moderate influence on CH₄ emission on these sites. Introducing the mid-season drainage reduced CH₄ emissions significantly. Process-based biogeochemical modeling, as with DNDC, can help in identifying strategies for optimizing resource use, increasing productivity, closing yield gaps and reducing adverse environmental impacts.     

Electrophoretic deposition of carbon nanotubes

Electrophoretic deposition (EPD) has been gaining increasing interest as an economical and versatile processing technique for the production of novel coatings or films of carbon nanotubes (CNTs) on conductive substrates. The purpose of the paper is to present an up-to-date comprehensive overview of current research progress in the field of EPD of CNTs. The paper specifically reviews the preparation and characterisation of stable CNT suspensions, and the mechanism of the EPD process; it includes discussion of pure CNT coatings and CNT/nanoparticle composite films. A complete discussion of the EPD parameters is presented, including electrode materials, deposition time, electrode separation, deposition voltage and resultant electric field. The paper highlights potential applications of the resulting CNT and CNT/composite structures, in areas such as field emission devices, fuel cells, and supercapacitors.     

A block copolymer nanotemplate for mechanically tunable polarized emission from a conjugated polymer

A polymer blend system consisting of polystyrene grafted onto poly (p-phenylene ethynylene) (PS-g-PPE) and poly (styrene-block-isoprene-block-styrene) triblock copolymer (SIS) yields highly polarized emission due to the unidirectional alignment of the PPE molecules. During the roll casting, the triblock copolymer microphase separates and creates unidirectionally aligned PS cylindrical microdomains in the rubbery PI matrix. PPE, a fluorescent conjugated polymer, was grafted with polystyrene (PS) side chains that enabled sequestration and alignment of these rigid backbone emitter molecules into the PS microdomains of the SIS triblock copolymer. Deforming the thermoplastic elastomer in a direction perpendicular to the orientation direction of the cylinders causes rotation of the PS cylinders and the PPE emitter molecules and affords tunable polarized emission due to re-orientation of the PPE containing PS cylinders as well as film thinning from Poisson effect.     

Influence of ash composition on heavy metal emissions in ash melting process

Two kinds of fly ash, discharged in the combustion of either refused derived fuel (RDF) or car shredder dust (SD), were examined for the emission of heavy metals in melting process under oxidizing and reducing conditions. The residual fractions of heavy metal in slag were experimentally estimated. As a result, it was confirmed that several volatile heavy metals were readily emitted during melting process. The type of atmosphere provided for the melting process was found to affect the emission of some volatile metals in RDF ash, but not in SD ash. The emission of volatile heavy metals in RDF ash under oxidizing conditions was lower than under any other conditions in this study. The emission behavior of iron and heavy metals in RDF ash under reducing conditions was similar to that in SD ash. These facts indicated that phosphorous in RDF ash had the property of fixing the volatile metals in the slag only under oxidizing conditions. Then the mixture of SD ash with phosphorous oxide powder was also tested in a melting process, and the result was consistent with the above inference of the effect of phosphorous.     

Damage evolution analysis in mortar, during compressive loading using acoustic emission and X-ray tomography: Effects of the sand/cement ratio

This paper explores the use of acoustic emission (AE) and X-ray tomography to identify the mechanisms of damage and the fracture process during compressive loading on concrete specimens. Three-dimensional (3D) X-ray tomography image analysis was used to observe defects of virgin mortar specimen under different compressive loads. Cumulative AE events were used to evaluate damage process in real time according to the sand/cement ratio. This work shows that AE and X-ray tomography are complementary nondestructive methods to measure, characterise and locate damage sites in mortar. The effect of the sand proportion on damage and fracture behaviour is studied, in relation with the microstructure of the material.     

国外柴油车减少排放污染的发展趋势

叙述了美国和欧共体柴油车排放法规和最新发展及世界主要固定柴油质量和规格的最新发展趋势，报道了柴油组成和性质对排放物影响的主要研究结果；分析了减少柴油车排放污染的主要措施，例如改进发动机、改进炼油工艺、采用尾气处理、采用颗粒物过滤－捕集器及采用减少尾气排污的三类柴油添加剂，最后提出了几点建议。     

Optimal control of the production–inventory system with deteriorating items and tradable emission permits

Using the well-known Arrow and Karlin (1958) Arrow, K.J., and Karlin, S. (1958), ‘Production over Time with Increasing Marginal Costs’, in Studies in the Mathematical Theory of Inventory and Production, eds. K.J. Arrow and S. Karlin, Stanford: Stanford University Press, pp. 61–69. [Google Scholar] dynamic production–inventory model and the model with tradable emission permits which was presented by Dobos (2005 Dobos, I. (2005), ‘The Effects of Emission Trading on Production and Inventories in the Arrow–Karlin Model’, International Journal of Production Economics, 93–94, 301–308.[Crossref], [Web of Science ®] , [Google Scholar], 2007) Dobos I. (2007), ‘Tradable Emission Permits and Production-inventory Strategies of the Firm’, International Journal of Production Economics, 108, 329–333.[Crossref], [Web of Science ®] , [Google Scholar], we develop a model of the production–inventory system with deteriorating items and tradable emission permits. The objective of this paper is to apply the optimal control theory to solve the production–inventory problem with deteriorating items and tradable emission permits, and derive the optimal inventory level and the optimal production rate that minimise the total cost. The results are discussed with a numerical example and a sensitivity analysis of the optimal solution with respect to the parameters of the production–inventory system is carried out.     

Exhaust Emissions from an Engine Fueled with Biodiesel from High-Oleic Soybeans

Biodiesel is a fuel comprising mono-alkyl esters of medium to long-chain fatty acids derived from vegetable oils or animal fats. Typically, engines operated on soybean-based biodiesel exhibit higher emissions of oxides of nitrogen (NOx) compared with petroleum diesel. The increase in NOx emissions might be an inherent characteristic of soybean oil’s polyunsaturation, because the level of saturation is known to affect the biodiesel’s cetane number, which can affect NOx. A feedstock that is mostly monounsaturated (i.e. oleate) helps to balance the tradeoff between cold flow and oxidative stability. Genetic modification has produced a soybean event, designated 335-13, with a fatty acid profile high in oleic acid (>85%) and with reduced palmitic acid (<4%). This high-oleic soybean oil was converted to biodiesel and run in a John Deere 4045T 4.5-L four-stroke, four-cylinder, turbocharged direct-injection diesel engine. The exhaust emissions were compared with those from conventional soybean oil biodiesel and commercial No. 2 diesel fuel. There was a significant reduction in NOx emissions (α = 0.05) using the high-oleic soybean biodiesel compared with regular soybean oil biodiesel. No significant differences were found between the regular and high-oleic biodiesel for unburned hydrocarbon and smoke emissions.     

ADCP数据综合处理方法及软件系统研制

由于仪器本身的限制和水文测验的实际需要,ADCP自带的数据处理软件WinRiver需要同时解译若干个R文件,并对解译数据进行垂线时间和空间插值,才能获得整点时刻特定起点距的垂线数据。为了弥补上述不足,通过对ADCP原始文件R文件进行解译,并根据ADCP数据处理的理论,研制了ADCP数据处理软件系统。该系统在长江口水文测验的实际应用效果表明,软件在数据的预处理和后处理方面均取得了良好的效果,可以进一步推广。