基于REST架构的矿山数字移动办公平台

基于面向资源思想以及REST架构,首次提出了矿山资源抽象层的概念,将矿山中各个异构系统的功能、文档、界面、工作流等抽象为能够通过标准URI来唯一标识的抽象资源元数据,在决策或智能分析层通过对元数据的分析和处理来实现相应操作或得出相关的分析结果;提出了基于REST框架的矿山数字移动办公平台设计方案,并以神木张家峁矿业有限公司移动办公平台的建设为例,介绍了将多个异构系统快速集成在移动终端的实现方法。应用结果表明,该移动办公平台运行稳定,操作流畅,使得工作人员能够随时、随地、随手办公,大大提高了办公灵活性及效率。     

The Structure of the Irreversibly Bound Adhesion Promoter-Substrate Interfacial Layer of γ-Aminopropylsilanetriol on Crystalline Si, as Measured by XPS and FTIR

The irreversibly bound interfacial layer deposited by the γ-aminopropysilanetriol adhesion promoter onto a crystalline silicon substrate, which remains even after profuse washing, was found by XPS to have resulted from the fragmentation and rearrangement of the original γ-aminopropylsilanetriol molecule. A mechanism is proposed, involving the homolytic scission of the terminal N-C bond. One of the subsequent reactions is believed to involve hydrogen loss by abstraction and the formation of a terminal vinyl group, which bonds to the substrate. Support for this mechanism is found in IR spectroscopy of this layer.     

Boundary layer model for char combustion and gasification

A non-steady boundary layer model is developed for numerical simulation of combustion and gasification of a single shrinking char particle. The model considers mass and energy conservation coupled with heterogeneous char reactions producing CO and homogeneous oxidation of CO to CO₂ in the boundary layer surrounding the char particle. Mass conservation includes accumulation, molecular diffusion, Stefan flow and generation by chemical reaction. Energy conservation includes radiation transfer at the particle surface and heat accumulation within the particle. Simulation results predict experimentally measured conversion and temperature profiles of a burning Spherocarb particle in a laminar flow reactor. Effects of bulk oxygen concentration and particle size on the combustion process are addressed. Predicted particle temperature is significantly affected by boundary layer combustion of CO to CO₂. With increasing particle size, char gasification to char combustion ratio increases, resulting in decreasing particle temperature and increasing peak boundary layer temperature.     

K_2O－CaO－Al_2O_3－SiO_2系统自释釉瓷化学组成的研究

本文从酸度系数着手，证实了Ｋ２Ｏ－ＣａＯ－Ａｌ４Ｏ久－ＳｉＯ２系统中存在自释釉组成，限定了其组成范围，０．６７％＜Ｋ２Ｏ＜１．２８％，１０．６４％＜ＣａＯ＜１３．６２％，１１．５３％＜Ａｌ４Ｏ３＜１５．３２％，７２．７３％＜ＳｉＯ２＜７４．０４％，并讨论了自释釉瓷的性能。     

基于复合左右手传输线结构的新型微带天线

基于复合左右手传输线结构的零阶谐振理论,提出了一种新型双层结构的微带天线,仿真结果表明该天线具有比单层微带天线更小的尺寸。研究了天线各结构参数对天线特性的影响,并对各参数进行了优化仿真。仿真结果表明该天线具有全向辐射特性,与传统微带天线相比,该天线具有体积小的特点。     

MATHEMATICAL MODELING OF THROUGH-HOLE-PLATING IN ELECTROCHEMICAL MICROFABRICATION II. AXISYMMETRIC TWO-DIMENSIONAL CONVECTIVE MASS TRANSFER

Axisymmetrical, two dimensional mass transfer in a tube and a through-hole was studied. The elliptic convective-diffusion equation was solved numerically by taking into account both the axial and radial diffusion in the entrance region of an infinite tube. The whole mass-transfer region in a tube of finite length was also studied by dividing the domain into several regions according to different mass-transfer mechanisms. A similar analysis is then conducted for a through-hole geometry by assuming a modified Hagen-Poiseuille fluid pattern. Results show that mass-transfer rate in a through-hole is larger than that in a tube by approximately 10%. This is due primarily to faster fluid flow within the concentration boundary layer in a through-hole.     

Analysis of impersonation attacks on systems using RF fingerprinting and low-end receivers

Recently, physical layer security commonly known as Radio Frequency (RF) fingerprinting has been proposed to provide an additional layer of security for wireless devices. A unique RF fingerprint can be used to establish the identity of a specific wireless device in order to prevent masquerading/impersonation attacks. In the literature, the performance of RF fingerprinting techniques is typically assessed using high-end (expensive) receiver hardware. However, in most practical situations receivers will not be high-end and will suffer from device specific impairments which affect the RF fingerprinting process. This paper evaluates the accuracy of RF fingerprinting employing low-end receivers. The vulnerability to an impersonation attack is assessed for a modulation-based RF fingerprinting system employing low-end commodity hardware (by legitimate and malicious users alike). Our results suggest that receiver impairment effectively decreases the success rate of impersonation attack on RF fingerprinting. In addition, the success rate of impersonation attack is receiver dependent.     

企业客户信息系统(ECIF)设计

以客户为中心是众多企业战略规划的重点,如何在信息技术飞速发展中,根据客户的特征、行为和偏好来获取新客户、促进企业的发展,企业客户信息系统的信息化建设已成为重中之重。采用J2EE设计了一个支持多层架构,并具有良好的可用性、伸缩性、扩展性、安全性的系统。系统可以实现对企业客户信息的数据管理、数据统计、数据维护等功能,提高了企业办公效率,完善了客户服务体系。     

关于控制氯代烃的政策选择

本文分析了氯代烃的生产所引起的环境问题,并提出了减少氯代烃环境影响的政策选择的基本原则。     

壁湍流周期性吹吸减阻的实验研究

为了研究局部周期性吹吸小扰动对湍流边界层的影响和湍流相干结构减阻控制机理,用实验方法研究了局部周期性吹吸小扰动与湍流边界层的相互作用.采用热线测速技术精细测量了施加吹扰动前后平板湍流边界层不同法向位置的流向、法向和展向速度分量的时间序列信号;通过测量扰动源下游近壁区域平均速度剖面的变化,发现在扰动下游一定空间范围内,粘性底层增厚和壁面减阻;通过对湍流度变化的分析,发现扰动影响猝发的发生;此外通过对展向平均涡量变化的分析发现,在扰动下游形成了2个定常的、强度相似的、大尺度的展向涡,它们起到流体滚动轴承的作用,减小了壁面摩擦阻力.