酚试剂法测定室内空气中甲醛的实验条件优化

为了提高酚试剂法测定室内空气中甲醛的准确性,优化实验条件,系统研究了盐酸介质浓度、显色剂加入量、显色时间、显色反应温度和稀释液类型等因素对吸光度的影响,研究结果表明,采用0.1 mol/L盐酸配制的硫酸铁铵显色剂,显色剂加入量对吸光度影响不显著,最佳加入量为0.4 mL;显色反应温度对吸光度影响明显,最佳温度应控制在25～35℃范围内;稳定的显色反应时间应控制在18～30 min内,以20 min为宜;当甲醛质量浓度较高时,可选用去离子水或酚试剂吸收液进行适当的稀释。在较优的实验条件下,测定的甲醛质量浓度与吸光度在0～2.0μg/mL范围内呈良好的线性关系,r=0.999 9。     

高效燃煤添加剂助燃效果的试验研究

燃煤添加剂是提高煤燃烧效率的有效措施,对高效燃煤添加剂进行了燃烧对比试验,检验其在实践中的可行性与性能.     

Catalysis of Active Carbon Supporting Transition Metal Oxides for Pyrotechnical Reagent with Potassium Perchlorate

In order to improve the pyrotechnical reagent with potassium perchlorate,composite catalyst of active carbon supporting transition metal oxides (TMO),Fe2O3 and CuO,were prepared and added into pyrotechnical reagent with potassium perchlorate.Accelerating rate calorimeter (ARC) was used to study the catalysis of pyrotechnical reagent which is consisted of potassium perchlorate and composite catalyst.Composite catalyst of both Fe2O3 and CuO supported by active carbon can catalyze pyrotechnical reagent with potassium perchlorate.Furthermore,it can lower the apparent activation energy and accelerate the reaction with a smaller quantity than that with Fe2O3 and CuO.The maximal reaction rate of pyrotechnical reagent with potassium perchlorate mixed with Fe2O3/active carbon and CuO/active carbon is 8.31 min-1 and 9.13 min-1,which is 1.74 times and 1.91 times of pyrotechnical reagent mixed with no catalyst;time to maximal rate was 18.99 min and 1.96 min respectively,which is lower than pyrotechnical reagent mixed with no catalyst by 86.46% and 98.67% ;the apparent activation energy is 368.10 kJ·mol-1 and 325.29 kJ·mol-1,which is lower than pyrotechnical reagent mixed with no catalyst by 31.89% and 39.81% respectively.     

用Fenton试剂-矿化垃圾生物反应器联合处理离子交换树脂再生废水

研究了Fenton试剂-矿化垃圾生物反应器联合处理离子交换树脂再生废水.研究结果表明：当原水CODCr为413 mg/L和过氧化氢投加量为24 mL/L（废水）时,经Fenton试剂预处理后,再经矿化垃圾生物反应器后续生化处理（运行周期为4 h,1 h进水,3 h落干,进水流量为600 mL/h）,出水CODCr降至85 mg/L左右,达到国家排放标准.     

添加剂对PVDF／PU复合膜成膜速度、结构与性能的影响

研究成孔添加剂聚乙二醇（PEG）和LiCl对聚偏氟乙烯（PVDF）／聚氨酯（PU）铸膜液体系的成膜动力学以及膜性能的影响．结果表明：加入PEG、LiCl均能加快成膜速度,膜的水通量有很大程度的提高,而截留率下降．不同相对分子质量PEG对成膜的影响略有不同．相对分子质量越大,黏度因素起到的作用越大,使得成膜速度随相对分子质量增加而稍有降低;相对分子质量越大,截留率下降得越明显;相对分子质量为4000时,PVDF／PU复合膜的综合性能最好．     

基于自适应参数设置的AIMD算法

为提高TCP（Transfer Control Protocol）流的平均发送数率,减少发送数率的波动,提高网络性能,提出了一种基于自适应参数设置的AIMD（Additive Increase Multiplicative Decrease）算法（A-AIMD算法）。仿真结果表明,在网络处于稳态运行时,使用A-AIMD算法能提高TCP流的平均发送速率,减小发送速率的波动性;在网络中有可利用的链路资源时,使用A-AIMD算法能快速地对可用资源进行最大占用,同时与Reno算法保持一定的TCP友好性。     

高性能电极接头栓的研制

研制了高粘结强度、低电阻率、高渗透性能接头栓,并说明了改进的目标和方向。研究了电极接头栓的使用性能、主要作用和选用接头栓补救电极和接头连接质量的优点;研究了电极接头栓的原料选择、原料配比、添加剂和发泡剂的选取;确定了电极接头栓的生产技术要求和生产工艺流程。试验证明,研制的高性能接头栓具有高粘结、强固结、有效补强的作用。     

Reaction of sodium perborate with a chlorinated cyclic hindered amine (TMP-Cl): I. Quantitative evaluation of active oxygen species in fabric bleaching

The reaction of N-chloro-4-hydroxy-2,2,6,6-tetramethylpiperidine (TMP-Cl) with sodium perborate (PB) was investigated with special reference to the generation of singlet oxygen and the possible application to a new oxidative bleaching process. Generation of the singlet oxygen (¹O₂), the hydroxyl radical (HO·) and superoxide anion radical (O₂·⁻) in the PB/TMP-Cl mixed solution was confirmed by the trapping reagent method. From the results of another experiment, in which the bleaching abilities of each active oxygen species were confirmed, the main active oxygen species contributing to the bleaching of purpurogallin, the skeleton of black tea pigment, in the PB/TMP-Cl system was concluded to be¹O₂.     

Two new aluminophosphates, IST-1 and IST-2: First examples of a dual templating role of water and methylamine in generating microporous structures

This study is aimed at exploring the ability of very small sized N-bearing molecules to generate and stabilize microporous aluminophosphates. Two new AlPO₄-n materials, called IST-1 and IST-2, have been obtained in aqueous media using, as main template, methylamine (MA), directly added, or generated in situ from methylformamide (MF) degradation. While IST-1 topology proved to be novel, IST-2 appears structurally related to AlPO₄-53(A). The obtained materials were characterized by powder XRD, TG/DSC, SEM and solid-state NMR. Tetraalkylammonium (TEA) cations were used as potential co-templates but only MA and water were found incorporated in the pore volumes of both structures, which argues for their true templating role. In IST-1, ¹³C solid-state NMR studies showed that half of MA species, presumably protonated, is H-bonded to framework oxygens while the other half surprisingly bonds directly to framework Al atoms. ¹³C NMR showed that only protonated MA occurs in IST-2 channels. TEA⁺ cations definitely do not play any specific template role. They indirectly favor the crystallization of IST-1 or IST-2 devoid from other crystalline or amorphous side phases, by interacting with part of the Al and P in solution and forming soluble [AlPO₄(OH)]–[TEA,HMA] complexes, substantially modifying the compositions of gels precursors to each phase during nucleation and/or growth steps. While both IST-1 and IST-2 crystallize from gels of similar initial compositions, it was demonstrated that the new MA/T ratio (T = Al or P) obtained after in situ complexation was the key parameter that specifically governs the crystallization of each phase.     

Rheological behavior of reactive blending of epoxidized natural rubber with cassava starch and epoxidized natural rubber with natural rubber and cassava starch

Epoxidized natural rubbers (ENR‐25 and ENR‐45) were prepared using the performic epoxidation method. Two‐component (ENR–cassava starch) and three‐component (ENR–NR–cassava starch) blends were prepared. ENR‐25 and ENR‐45 were blended with various quantities of gelatinized cassava starch in the latex state. The pure ENR exhibited lower shear stress and shear viscosity than those of the blends with cassava starch. Furthermore, the shear stress and shear viscosity were increased with an increase in the cassava starch concentration. The chemical interaction between the epoxide groups in the ENR and the hydroxyl groups in the cassava starch molecules might be the reason for the increasing trends of the shear stress and shear viscosity. The blends are classified as compatible blends because of the strong chemical bonding between different phases. SEM micrographs were used to clarify the compatibility. Power law behavior with pluglike flow profiles was observed for all sets of ENR–NR–cassava starch blends. Very low power law index values (<0.34) and highly pseudoplastic fluid behavior were also observed. The log additive rule was applied to plots of zero shear viscosity (consistency index) and the shear viscosity versus the concentration of ENR‐25. Positive deviation blending was observed, which indicates compatible blends. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1752–1762, 2004