Thermodynamic Analysis of Chemical Vapor Deposition of BN + AIN Composite Coatings

Thermodynamic calculations were performed using a modified solgasmix-pv computer program in order to study the feasibility of codepositing boron nitride (BN) plus aluminum nitride (AIN) by chemical vapor deposition. Reactants considered were AICl₃, BCl₃ or B₂H₆, NH₃, and H₂. Deposition diagrams were generated for the BCl₃-AICl₃-NH₃ system over a range of processing conditions such as temperature, total system pressure, and reagent concentrations. Codeposition of BN + AIN was predicted by the calculations for temperatures in the range of 900 to 1700 K and pressures of 10.13 to 101.3 kPa. The predicted deposition efficiency at equilibrium was much higher for BN than for AlN at most reagent compositions. The AlN deposition efficiency increased with decreasing temperature and decreasing BCl₃ content, with increasing NH₃ content, or with the addition of H₂. Aluminum chlorides were found to be the dominant gaseous species.     

吸附法脱除丁烯中仲丁醇

针对丁烯水合生产仲丁醇过程中,剩余丁烯含有质量分数为0.1%~2.0%的仲丁醇(SBA)而不能满足工业循环的要求,开发了吸附法脱除仲丁醇的技术。对吸附剂进行了筛选,结果表明,所研制的PUMS-01吸附剂有很大的吸附容量,将其应用在兰州炼油化工总厂甲乙酮装置的侧线放大试验中,能将原料中SBA的质量浓度降至100 mg/L以下,再生后的吸附剂吸附性能良好,且稳定。     

改性活性炭的表面特性及其对苯酚的吸附性能

研究了表面改性对活性炭吸附苯酚性能的影响。研究发现,硫酸氧化可增加活性炭表面酸性基团的含量,提高了活性炭的表面亲水性,降低pHPZC值,因而对吸附水中的苯酚的性能产生明显影响,降低了对苯酚的吸附。     

非常规汽油脱硫技术

水蒸气脱硫是一种以水代替氢的脱硫方法,降低脱硫成本显著。以酶代替传统加氢催化剂的生物脱硫技术是一个引人注目的课题。结合催化和精馏的催化精馏脱硫法,在选择脱硫的对象上,相对传统的催化脱硫更具优势。萃取脱硫是采用一些极性溶剂混合物脱除汽油馏分中的硫化物,须加入氧化助剂才有较好的脱硫效果,由此将导致大的辅助车间和有限脱硫效率。膜过程脱硫、声化学脱硫、等离子体和光脱硫都属于物理方法,环保意义很大。对于吸附脱硫,从流化催化裂化汽油中除硫完全,而汽油产率降低很少,辛烷值几乎没有损失,是一种有前途的脱硫方法。     

Molecular design and characterization of catalysts for NO x selective reduction by hydrocarbons in the oxygen excess based upon ultramicroporous zirconia pillared clays

Approaches to design of zirconia pillared clays via control of the properties of pillaring species in solutions were elaborated. Structural features of pillars and Pt + Cu active components fixed at these nanoparticles were shown to determine catalytic properties of pillared clays in NO_x selective reduction by hydrocarbons in the oxygen excess.     

阳光下TiO2/GAC光催化处理洗涤剂废水的研究

利用太阳光作光源，采用固定在颗粒活性炭中的TiO2(TiO2／GAC)作光催化剂，利用其将活性炭极好的吸附性与TiO2优良的光催化性能结合于一体的特性，设计了对以洗衣粉配置的洗涤剂模拟废水的两种处理方案：同时光照-吸附法和吸附饱和-光照水洗再生法，并在实验基础上对两种方案的一些性能进行了讨论。     

EPR Study of CO Adsorption onto CoZSM-5 Zeolite: Evidence for Spin Crossover upon Coordination and |z2, 2A1〉 Ground State

Adsorption of CO onto dehydrated cobalt-exchanged ZSM-5 zeolite was studied by CW-EPR techniques. It is shown that the reversible formation of a low spin carbonyl ¹{Co(CO) _n }⁷ adduct upon addition of carbon monoxide at p _CO>50–60 Torr involves significant change in the spin state of Co²⁺ from S=3/2 to 1/2. The spin Hamiltonian parameters of the adduct g _x =2.222, g _y =2.184, g _z =2.011, |A _x |=3.8 mT, |A _y |=3.2 mT, |A _z |=7.9 mT were determined by a computer simulation and further discussed in terms of the possible ground state and molecular structure. It is shown that the ¹{Co(CO) _n }⁷ cage complex exhibits a C_2v symmetry with |z ²,²A₁ ground state.     

Acid-Base Properties of Zirconium, Cerium and Lanthanum Oxides by Calorimetric and Catalytic Investigation

The combined use of calorimetric and catalytic methods for the investigation of the acid-base properties of oxide systems is discussed with reference to the authors' work on pure and doped zirconia samples, ceria-zirconia and ceria-lanthana solid solutions. Adsorption microcalorimetry of ammonia and carbon dioxide had been used to characterize the samples, whose chemical and thermal history was taken into account. The catalytic behavior of these samples in the conversion of 4-methylpentan-2-ol, route to 4-methylpent-1-ene (starting product for the manufacture of polymers of superior technological properties), had also been studied. On the basis of the calorimetric data, a rationale for interpreting the data for the transformation of 4-methylpentan-2-ol is formulated, which takes into account the role of the concentration and strength of the sites in governing the competition among the various mechanisms for dehydration and dehydrogenation.     

Binding of several heavy metal ions by polyaspartyl polymers and their application to some Chinese herbal medicines

Water‐insoluble polyaspartyl polymers were synthesized by using water as medium instead of organic medium. Taking Ca²⁺ as a reference, the binding of several heavy‐metal ions, including Pb²⁺, Cd²⁺, Hg²⁺, Cr³⁺, Cu²⁺, and Mn²⁺, by polyaspartyl polymers was studied. The experimental results revealed that polyaspartate is an excellent binding agent for the investigated heavy‐metal ions. These cation ions were bound to polyaspartate polymer by the same mechanism as Pb²⁺, which can be explained by ion exchange model. Since polyaspartate has a protein‐resembling structure that is sensitive to trace heavy metal, it was used to remove some trace heavy‐metal elements in Chinese herbal medicines. It was found that polyaspartate material was an effective agent for the removal of Pb²⁺, Cd²⁺, and Hg²⁺ ions from glycyrrhizin, angelica, and gynostemma pentaphyllum. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

氧化铝上吸附平衡与动力学的分形特性

在实验测定氧化铝吸附氮气的平衡和动力学过程的基础上 ,由平衡数据得到分形维数 ,对动力学结果分别用欧氏几何和分形几何的动力学模型进行处理 ,比较两种方法得到的扩散系数之间的差别。结果表明 :粉状氧化铝的分形维数为 2 .12 ;采用分形动力学模型得到的扩散系数同欧氏几何扩散模型的结果不一样 ,扩散系数不随浓度的变化而改变 ;而欧氏几何扩散模型中的扩散系数随浓度变化发生改变 ,且变化符合Darken关系