Pilot Study for the Performance of a New Demand Control Ventilation System in Hong Kong

There are different ventilation control methods for outdoor air quantity in air-conditioned spaces to reduce the energy consumed in cooling the outdoor air. Demand controlled ventilation (DCV) is an important strategy to control the outdoor air quantity. However, the current practice in DCV systems creates several problems for air-conditioned office buildings. Although metabolic carbon dioxide (CO2) concentration is mainly used as a surrogate indicator for ventilation adequacy, the conventional DCV system does not seriously consider the placement location of the CO2 sensor, and it does not take into account the adverse effects of the consequential increase in pollutant concentrations in the indoor space when the fresh airflow rate is reduced. In this study, a long period of subjective and objective measurements were conducted in an occupied office to examine its suitability for conversion to a new demand controlled ventilation system (nDCV). After the feasibility investigation, an nDCV system was developed to optimize the energy consumed for outdoor air ventilation while providing the desirable thermal comfort and indoor air quality. The true optimization of this nDCV is achieved by a new concept of the optimized indoor air quality window which determines the most representative locations for the indicator sensors. A minimum ventilation rate is determined by a calibration procedure for the pollutant inventory of a building, taking into account the infiltration characteristics. Radon gas, which is a notorious carcinogenic indoor pollutant, is used as a reference to determine the minimum fresh airflow rate. The findings show that this nDCV system reduced 16% of fresh air cooling energy consumption without jeopardizing the thermal comfort and indoor air quality.     

热脏发生炉煤气与空气蓄热技术在加热炉上的应用

介绍了石钢二轧厂利用燃热发生炉煤气与空气蓄热技术对燃煤粉加热炉进行改造的实践和效果。     

燃油烟气净化电收尘器的改造实践

介绍了以重油为燃料的回转窑半氧化焙烧烟气净化电收尘器运行中存在的问题、改造方案及效果,同时简述了热风清扫在大负压电收尘器上的应用情况.     

大气监测仪器的发展及检定中的问题探讨

本文叙述了大气监测仪器的起源发展过程,分析在检定工作中存在的问题,讨论了解决办法。     

风机动力型末端在变风量空调系统中的应用

通过对从低温送风技术中发展起来的变风量系统末端--风机动力箱的分析,在实际应用中对比两种型式的该种末端,分析其优缺点,认为这是一种值得在高级办公大楼中优先考虑和推广的系统形式.     

四川锦屏山电站施工辅助洞通风设计方案分析

四川锦屏山电站施工辅助隧道属特长隧道,本文根据其特殊性,重点比较了目前常用的几种隧道通风方式,最终选择一种较为合理的通风方案.     

气浮除油技术在焦油废水处理中的应用

对焦油废水的来源和性质进行了分析,并对气浮除油工作原理及关键设备,在焦油废水处理现场应用中存在的问题及改进措施进行了研究,表明气浮除油技术在该领域具有良好的应用前景。     

基于MEMS加速度传感器的双轴倾角计及其应用

利用MEMS加速度传感器设计了双轴倾角计,并采用单片机进行了线性化和温度补偿,倾斜角以模拟量和数字量2种形式输出。该倾角计体积小、重量轻、精度高,能够很好地满足MAV姿态控制及其他应用的倾角测量。     

低压省煤器在电站锅炉中的应用

针对排烟损失大的问题，某些电厂在电除尘器出口加装低压省煤器，用来加热凝结水或热网补水，从而吸收烟气热量，实际测试结果表明，对于节能降耗和保证安全运行均起到了重要作用。     

组合式空调系统设计中机组选型方法探讨

对目前组合式空调机组在选型设计及使用中出现的问题进行了分析，运用空气处理设备选型的有关理论和计算方法，对舒适性空调系统中机组选型的一些问题和数据进行了简化和近似处理，提出了能够满足工程设计的要求的简便实用的选型方法。