Increasing productivity and protein content using early-maturing rices and efficient nitrogen management

Germplasm with shorter duration than that of the currently grown varieties is being generated to maximize productivity of irrigated rice. However, short-duration varieties often produce yields lower than the medium- and long-duration varieties. Experiments were conducted during the 1980–82 dry and wet seasons to increase productivity through the use of very early-maturing rices and the improved management of nitrogen (N) fertilizers.Results over three years showed that IR58 and IR9729-67-3 (growth duration 100 ± 5 days) yield as well as or higher than IR36 although earlier maturing. They generally had a higher productivity (kg ha^–1 day^–1) than IR36 (110 ± 5 days).Three years' data suggest that the improved timing of broadcast applications of urea in split doses increased grain yield comparable with the basal incorporation of slow-release sulfur-coated urea (SCU) or deep point-placement of urea supergranules (USG).Results on elite breeding lines showed that the early-maturing IR9729-67-3 produced higher protein yield ha^–1 than longer duration varieties such as IR8 and IR42 in the dry season. Furthermore, contrary to earlier results, single basal incorporation of slow-release SCU increased the protein yield of rice by 53 kg ha^–1 and deep point-placement of USG by 43 kg ha^–1 over split application of prilled urea.     

Synthesis of cyano-polycarbosilane and investigation of its pyrolysis process

Polycarbonsilane (PCS) is an important precursor of silicon carbide (SiC) fibers and ceramics. The ceramic yield of PCS is relatively low, about 60 %, which may bring some deficiencies in its applications. In this work, a novel precursor cyano-polycarbosilane (PCSCN) is synthesized by hydrosilylation reaction between PCS and acrylonitrile using a rhodium-containing catalyst, although acrylonitrile is generally not easy for hydrosilylation. After introducing tiny amounts of cyano (-C≡N) groups into the PCS molecules, the ceramic yield of PCSCN can increase largely to over 80 %. The ceramization mechanism of PCSCN is investigated by FTIR, TG, XPS, ESR, NMR, Raman and XRD analyses. It is found that some crosslinking structures in PCSCN are formed between SiH bonds and CN groups from about 200 ℃, which can be responsible for the high ceramic yield. The existence of a little more N, O and free C elements in the pyrolysis products may inhibit the growth of crystalline β-SiC. Moreover, the PCSCN precursor can also be melt-spun into continuous fibers by tailoring its molecular weight and softening point. The oxidized PCSCN fiber with relatively low oxygen content can be pyrolyzed without melting, and the final SiC fiber with an oxygen content as low as 8.5 % is obtained.     

四维瞬变电磁法油藏监测正演模拟

本文采用基于张量格林函数的体积分方程法进行四维模型瞬变电磁响应的正演研究,文章中首先说明了四维瞬变电磁法模拟的可行性及程序实现,然后分别设计了两个三维异常体模型(水藏、油藏),采用两种观测方式(激发与接收平行、激发与接收垂直)进行正演模拟计算,并对所得的二次总场的数据进行了分析。     

提高轻苯产率和降低洗油消耗的措施

通过对粗苯装置设备的改造和优化操作,既解决了设备能力与生产负荷不匹配的问题,又提高了轻苯收率和降低了洗油消耗。     

Influence of modified forms of urea and nitrogen levels on weed growth and grain yield of lowland rice

The growth of weeds and their subsequent reduction of rice yield as affected by N source neem cake coated urea (NCU), dicyandiamide coated urea (DCU), rock phosphate coated urea (RPCU), urea supergranules (USG) and prilled urea (PU) was studied on a clay loam soil at Coimbatore, India. Experiments were conducted in northeast monsoon (NEM) 1981, summer 1982, and southwest monsoon (SWM) 1982 seasons.The crop was associated with eleven weed species, and the dominant weeds wereEchinochloa crus-galli, Cyperus difformis andMarsilea quadrifolia. The weed flora varied between seasons. Deep placement of USG reduced the dry weight of weeds in NEM and summer seasons at 60, 90 and 120 Kg N ha^–1 whereas it increased the dry weight at 60 and 90 but not 120 Kg N ha^–1 in SWM season. The dry weight of weeds decreased with increased N rates for all N sources during NEM and summer seasons. In SWM season, dry weight of weeds increased with increased N rates for all N sources except USG. The grain yield of rice was drastically reduced with the deep placement of USG at 60 but not 120 Kg N ha^–1 in SWM season. The differential effect of the N sources between seasons was due to the change of the weed flora. Dominance ofE. crus-galli during SWM season had greater influence on weed dry weight and grain yield of rice.Nitrogen uptake by weeds was frequently greater in unfertilized plots, particularly in NEM and summer seasons. In SWM season, the apparent fertilizer N recovery by weeds was high for USG. It decreased from 53% for 60 Kg USG-N ha^–1 to 4% for 120 Kg USG-N ha^–1.Contribution from the part of Ph.D. work of the first author at Department of Agronomy, Tamil Nadu Agricultural University, Coimbatore-641 003, Tamil Nadu, India.     

Degradation of acrylonitrile–ammonium itaconate copolymers

Acrylonitrile–ammonium itaconate copolymers were prepared by H₂O/dimethyl formamide suspension polymerization technique. Differential scanning calorimetry results of the degradation of acrylonitrile–ammonium itaconate copolymers in air are presented. The apparent activation energy of degradation of the copolymer was calculated using the Kissinger method. Effects of copolymerization conditions on the apparent activation energy of copolymer were studied. Increasing the dimethyl formamide concentration in the solvent mixture leads to a rapid increase in the degradation apparent activation energy of acrylonitrile–ammonium itaconate copolymer. The value of the degradation apparent activation energy of the copolymer synthesized in dimethyl formamide solvent increases up to 168.3 kJ mol^?1. The apparent activation energy decreases quickly along with an increase in ammonium itaconate concentration, and this change becomes less prominent as the weight ratio of ammonium itaconate/acrylonitrile goes beyond 6/94, ΔE_a = 89.4 ± 2.0 kJ mol^?1. The apparent activation energy shows a trend of increase with increasing copolymerization temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1708–1711, 2005     

The effect of water on the tensile yield of polystyrene

When PS is tested in tension but immersed in water the yield stress is unchanged and the crazing stress is increased, as compared with tests conducted in air. The crazing pattern is otherwise unchanged. If the PS is first equilibrated with water and then tested under water, both crazing stress and yield stress are reduced. A very large number of small crazes are generated which result in a 23% increase in the fracture strain.     

乙烯收率状况分析与对策

通过对广州石化乙烯厂裂解原料、收率、运行状况进行分析，揭示石脑油质量波动对乙烯收率的影响，研究了乙烯收率的偏低原因，并提出原料频繁变化条件下，原料优化运作和COT调整对策。     

Synthesis and characterization of liquid crystalline polymers containing aromatic ester mesogen and a nonmesogenic ferrocene unit in the spacer

A new series of liquid crystalline polymers containing aromatic triad ester mesogen and 1,1′‐disubstituted ferrocene as a nonmesogenic unit along with polymethylene spacer was synthesized. The polymer was synthesized by a room temperature polycondensation reaction between bis(4‐chloroformyl phenyloxy alkyl ferrocene dicarboxylate) and quinol. The alkyl groups have been varied by an even number of methylene groups with a range from two to ten groups. All the polymers were found to possess liquid crystalline properties. The identification of the mesophase is more transparent with an increase in the spacer. The thermal characteristics were studied using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results reveal that the thermal stability of the polymers was decreased with increasing spacer length. The T_g, T_m, and T_i of the polymers decreased with increasing methylene groups. The incorporation of the ferrocene moiety also has a considerable effect on the glass transition temperature. The char yield of the polymer decreases with an increasing methylene chain length. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3494–3501, 2002     

The effect of supercooling on crystallization of cocoa butter-vegetable oil blends

The solid fat content (SFC), Avrami index (n), crystallization rate (z), fractal dimension (D), and the pre-exponential term [log(γ)] were determined in blends of cocoa butter (CB) with canola oil or soybean oil crystallized at temperatures (T _Cr) between 9.5 and 13.5°C. The relationship of these parameters with the elasticity (G′) and yield stress (σ^*) values of the crystallized blends was investigated, considering the equilibrium melting temperature (T _M ^o) and the supercooling (i.e., T _Cr ^o−T _M ^o) present in the blends. In general, supercooling was higher in the CB/soybean oil blend [T _M ^o=65.8°C (±3.0°C)] than in the CB/canola oil blend [T _M ^o=33.7°C (±4.9°C)]. Therefore, under similar T _Cr values, higher SFC and z values (P<0.05) were obtained with the CB/soybean oil blend. However, independent of T _Cr TAG followed a spherulitic crystal growth mechanism in both blends. Supercooling calculated with melting temperatures from DSC thermograms explained the SFC and z behavior just within each blend. However, supercooling calculated with T _M ^o explained both the SFC and z behavior within each blend and between the blends. Thus, independent of the blend used, SFC described the behavior of G′_eq and σ^* and pointed out the presence of two supercooling regions. In the lower supercooling region, G′_eq and σ^* decreased as SFC increased between 20 and 23%. In this region, the crystal network structures were formed by a mixture of small β′ crystals and large β crystals. In contrast, in the higher supercooling region (24 to 27% SFC), G′_eq and σ^* had a direct relationship with SFC, and the crystal network structure was formed mainly by small β′ crystals. However, we could not find a particular relationship that described the overall behavior of G′_eq and σ^* as a function of D and independent of the system investigated.