金安金沙江悬索桥隧道式锚碇变形破坏机制研究

隧道式锚碇的变形破坏机制涉及到结构与围岩的协同作用问题。以华丽高速公路金安金沙江悬索桥两岸隧道锚变形破坏机制为研究对象,利用工程类比法评价了其稳定性控制要素,设计了超载数值试验。根据塑性区的扩展过程确定了施工安全监测和需要采取预加固的重点部位,确定了隧道锚围岩的破坏模式。根据锚面监测点位移由mm到cm量级突变确定的两岸锚岩系统极限荷载均为6~8倍设计缆力,则锚岩系统的设计承载力取3倍设计缆力下变形安全是有保障的。丽江岸塑性区在10 P下贯通;华坪岸塑性区在14 P下贯通。设计缆力作用下,丽江岸锚碇最大位移1.5 mm、围岩1.2 mm、地表0.5 mm;华坪岸锚碇最大位移1.7 mm、围岩1.5 mm、地表0.7 mm,其响应顺序为后锚面监测点前锚面监测点锚碇中间岩体地表点,可作为后期结构及围岩安全监测布点和预警的参考,也证明当前设计缆力下变形和强度均是安全的。     

振动剪切作用下聚合物熔体的非仿射网络结构模型 Ⅱ．非仿射网络结构模型

假设聚合物熔体的缠结网络形变是非仿射的，运用瞬态网络结构原理，采用在本课题第一部分^[1]中所建立的动态速率方程，并对上随体Maxwell本构方程加以修正来建立一个非仿射网络结构模型，利用这一模型来研究振动剪切作用下LDPE熔体的流变行为，研究表明，随着应变振幅和频率的增加，LDPE熔体的剪切应力也增加，同时指出了非仿射网络结构模型的精确变比仿射结构模型有较大提高，这表明在振动力场作用下，网络形变发生了非仿射形变，因此在建立振动力场作用下聚烯烃熔体本构方程时，不能假设其网络是仿射形变的。     

石油化工装备“后果分析”方法的介绍

石油化工装备的失效,由于所处理的物料常常是易燃易爆的化学品,所以往往导致发生燃烧、爆炸等,还可以波及附近的其它装置和设备发生连锁的失效和爆炸。为了分析这种严重事故可能造成的影响,研究防止这种事故的发生,近年来研究和发展了一种定量估计这种失效后果严重程度的方法,称为后果分析(Consequence Analysis)。通过分析,从这些设备的失效概率、可能发生的失效形式,研究设备内物料的泄漏形式、可能发生的后果、影响范围的大小、对周围装置、环境和人员的危害程度等,从而提出在设备设计、工厂的总图设计中采取的措施,以减轻其危害的程度。     

基于微观孔隙通道的饱和/非饱和土渗透系数模型及其应用

从微观角度揭示土体变形对饱和/非饱和渗透系数的影响机理,建立相应的预测方法,对于饱和/非饱和土的渗流分析及水力耦合研究具有重要的科学意义。利用流体力学理论,建立了微观孔隙通道渗透系数与等效孔径的关系,在此基础之上,结合毛细理论建立了饱和/非饱和渗透系数与土-水特征曲线的关系模型,并利用已有试验数据验证了模型的合理性。结合该模型与变形条件下土-水特征曲线预测方法,对变形条件下武汉黏性土饱和/非饱和渗透系数进行预测,结果表明黏性土在压缩变形条件下:饱和渗透系数呈数量级的减小,预测值与实测值均吻合较好;双对数坐标下,非饱和相对渗透系数在进气值之后随基质吸力增加而减小,不同初始孔隙比条件下其斜率近似不变,整体呈现"毛刷型"分布,相同基质吸力条件下,初始孔隙比越小,相对渗透系数越大;非饱和渗透系数,进气值之前近似为饱和渗透系数,进气值之后随基质吸力增大而减小,不同初始孔隙比的变化线近似重合。     

三维激光扫描技术在引水隧洞检修中的应用

三维激光扫描技术是国际上近年发展的一项集光、电和计算机技术于一体的新技术,利用该技术可以快速、精确地获取空间数据。锦屏二级水电站引水隧洞放空检修时发现少数洞内存在混凝土破损情况,但受时间与费用等因素限制,难于以采用常规手段详细检查混凝土表面缺陷与变形等问题。通过采用三维激光扫描技术对隧洞进行全断面扫描,及时探查了混凝土表面的缺陷并进行了处理,确保了工程安全运行;同时,还得到混凝土表面的三维坐标信息,建立了混凝土表面缺陷基准数据库,可为后续进一步分析混凝土表面缺陷的变化情况提供参考。     

Deformation similarity measurement in quasi-conformal shape space

This paper presents a novel approach based on the shape space concept to classify deformations of 3D models. A new quasi-conformal metric is introduced which measures the curvature changes at each vertex of each pose during the deformation. The shapes with similar deformation patterns follow a similar deformation curve in shape space. Energy functional of the deformation curve is minimized to calculate the geodesic curve connecting two shapes on the shape space manifold. The geodesic distance illustrates the similarity between two shapes, which is used to compute the similarity between the deformations. We applied our method to classify the left ventricle deformations of myopathic and control subjects, and the sensitivity and specificity of our method were 88.8% and 85.7%, which are higher than other methods based on the left ventricle cavity, which shows our method can quantify the similarity and disparity of the left ventricle motion well.     

基于NoSQL数据库的大数据存储技术的研究与应用

实际工程中采集和处理的数据量特别大,这对传统数据库技术提出巨大挑战。针对传统关系型数据库存储速度慢、对硬件要求高的缺点,提出一种以NoSQL数据库为基础的大数据处理方法,打破了传统数据库的关系模型,数据以一种自由的方式存储,而不依赖固定的表结构。该方法主要是将经验模态分解并与NoSQL数据库技术相结合,应用于大型结构件的变形监测中,构建出一个基于NoSQL数据库系统的大型结构件变形监测系统。仿真结果表明,该方法可以实现大型结构件变形监测数据的实时处理,在计算收敛性、算法稳定性和处理速度上都优于传统数据库技术。     

Mixing in the transition flow regime with helical ribbon agitators

The effects of the non-Newtonian properties on the effective deformation rate, mixing and circulation times and flow behaviour have been investigated in the transition flow regime of mixing systems. Based on the equivalent Couette flow, three models are proposed and are shown to predict similar and drastic increases of the effective deformation rate with the impeller rotational speed in the transition regime. The predictions are shown to fit very well data obtained for various non-Newtonian fluids mixed with helical ribbon agitators, and with literature data for anchor, blade turbine and flat disc agitators. The elasticity along with shear-thinning properties appear to have slight effects on the dimensionless mixing and circulation times in the transition regime, whereas their effects in the laminar regime are quite drastic, as reported by others.     

Time Deformation,Continuous Euler Processes and Forecasting

Abstract. A continuous Euler model has time‐varying coefficients. Through a logarithmic time transformation, a continuous Euler model can be transformed to a continuous autoregressive (AR) model. By using the continuous Kalman filtering through the Laplace method, this article explores the data application of a continuous Euler process. This time deformation of an Euler process deforms specific time‐variant (non‐stationary) behaviour to time‐invariant (stationary) data on the deformed time scale. With these time‐invariant data on the transformed time scale, one may use traditional tools to conduct parameter estimation and forecasts. The obtained results can then be transformed back to the original time scale. Simulated data and actual data such as bat echolocation and the US residential investment growth are used to demonstrate the usefulness of time deformation in forecasting. The results indicate that fitting a traditional autoregressive moving‐average (ARMA) model on an Euler data set without imposing time transformation leads to forecasts that are out of phase while the forecasts of an Euler model stay mostly in phase.     

玻璃钢件固化成型中变形现象的剖析

结合实例剖析由产品结构、成型工艺和工艺装备等主要因素影响的复合夹层结构玻璃钢件和实体玻璃钢件在固化成型中的变形现象，并指出了预防变形的各相应有效措施。