Bioprocess applications of model-based estimation techniques

The last decade has seen the development of a number of approaches for estimating those variables which are difficult to measure on-line in industrial process situations. Whilst a range of techniques is available, a common element is the use of process knowledge in the form of a system model. In the case of bioprocess systems, although a large range of models has been presented in the literature, their use in estimation schemes on an industrial scale has been limited. A number of reasons can be identified for their low level of utilisation. Of particular significance is the uncertainty which exists in quantifying system performance and the process-model mismatch which inevitably results. The level of ‘pre-defined model’ uncertainty, together with the knowledge gained during the course of the fermentation, serves to dictate estimator structure. The paper considers a range of estimation strategies and contrasts, through industrial applications, their performance characteristics and utility.     

关于砂金工艺矿物学研究规范化的建议

本文从样品的采集、加工、制备到砂金性状、矿砂物质组成;从分离、鉴定质量要求到选矿产品考察;从矿砂可洗性、可选性评价到矿砂工艺类型确定等项内容的系统化、标准化,阐述了砂金工艺矿物学的研究规范。     

SC文法功能体系

文法体系的研究一直是自然语言处理研究的核心问题之一.但是,由于自然语言本身所固有的复杂性和非规范性,多义问题始终未能得到圆满的解决.本文提出了SC文法(A SubCategory grammar for integrating Se-mantic and Case analysis),它是一种基于传统的上下文无关文法、语义文法,以及超前与反馈分析技术和格框架约束分析等技术的上下文相关处理文法.该文法不仅能继承传统的上下文无关文法的表示简洁、处理方便的特点,而且能实现语法和语义一体化分析和处理上下文相关以及复杂多义问题.     

骑马岭水电站砂石加工系统规划设计

介绍了骑马岭水电站砂石加工系统的料源规划、系统规划设计、系统工艺流程及环保措施。该加工系统采用的典型的二段破碎工艺，对中小型水电站混凝土骨料生产系统的设计具有一定的参考价值。同时，该加工系统在废水处理水回收利用及细砂与石粉回收、防尘、降低噪声，以及固体废弃物处置等方面，均采取了相应的环保措施，以减少其对施工人员和周围环境的影响。     

开展CAD／CAM／CAE工作提高矿用牙轮钻头设计研制水平

我国矿用牙轮钻头同世界先进水平相比有较大差距，大力开展矿用牙轮钻头CAD／CAM／CAE工作，促进学科交叉融合，是摆脱落后局面，参与全球性竞争的一项重要任务。     

Dental amalgam – the effect of the technology of alloy powder preparation on the corrosion behaviour and the release of mercury

Dental amalgams are based on a broad spectrum of materials differing in their chemical composition, metallurgical treatment, and in the way the initial alloys powders are prepared. In addition to their chemical composition, amalgams based on various powders differ in both their microstructure and the amount of mercury needed for preparation. All these facts may affect electrochemical processes occurring during their interaction with oral fluids, and also mercury release. While verifying the effect of the technology used for the preparation of the high‐copper ternary alloy powder on the properties of resulting amalgams, this study aimed at the mechanism of their interaction with a model saliva solution as well as mercury release was included. Measurements were done in a model saliva solution using standard electrochemical methods and exposition measurements. The interaction of individual types of amalgams with artificial saliva did not reveal any significant differences. The free corrosion potential of all these amalgams in an aerated solution settled in the range of values in which tin oxidation, resulting in a layer of insoluble corrosion producsts, turned out to be the dominant anodic process. The rate of mercury release was the lowest for amalgams based on a gas‐atomized alloy. The highest rate of mercury release, and also its dependence on time, was exhibited by lathe‐cut powder based amalgam. In addition to different volume fraction of the Ag‐Hg phase and the level of its tin alloying, this different behaviour may be explained by differences in the rate at which a layer of tin corrosion products acting as a barrier to mercury release is formed.     

瓦斯尾巷在高档普采工作面的应用

介绍了高档普采工作面利用掘送瓦斯尾巷等措施形成回风空间 ,从根本上解决高档普采工作面的瓦斯超限问题 ,其工艺有利于在其它采煤工作面内应用     

阳泉市常用地基处理方法探讨

对阳泉市常用地基处理方法进行了分析，从适用范围、设计要点、施工与检验等方面进行了论述，着重提出了阳泉市常用地基处理方法的特点与适用性。     

Application of artificial neural networks to the analysis of two‐dimensional fluorescence spectra in recombinant E coli fermentation processes

A two‐dimensional (2D) spectrofluorometer was used to monitor various fermentation processes with recombinant E coli for the production of 5‐aminolevulinic acid (ALA). The whole fluorescence spectral data obtained during a process were analyzed using artificial neural networks, ie self‐organizing map (SOM) and feedforward backpropagation neural network (BPNN). The SOM‐based classification of the whole spectral data has made it possible to qualitatively associate some process parameters with the normalized weights and variances, and to select some useful combinations of excitation and emission wavelengths. Based on the classified fluorescence spectra a supervised BPNN algorithm was used to predict some of the process parameters. It was also shown that the BPNN models could elucidate some sections of the process's performance, eg forecasting the process's performance. Copyright © 2005 Society of Chemical Industry     

沾化凹陷南斜坡油气运移条件及运移特征研究

油气运移的条件和油气运移的特征决定了油气藏的形成与分布。沾化凹陷南斜坡不整合面、断层以及各层系储集砂体的空间配置构成复杂的立体网络通道，决定了油气的运移，控制了油气分布。以断层为垂向运移通道的油气藏常在断层带附近多层叠置；以连通砂体为主要运移通道的油气藏常形成于距烃源层较近或相邻的层位；以不整合面作为运移通道往往可使油气长距离运移形成各种地层油气藏。沾化凹陷南斜坡的油气藏都是油气经过两种或多种输导层阶梯式运移而形成的。砂体、断层和不整合面组成的输导系统的末端和边缘是油气运移的重要指向区。