Why do small business butcher shops fail to fully implement HACCP?

This study aims to assess the degree of HACCP implementation in small business butcher shops and understand which factors most influence butchers' intention to fully implement it, through the application of the Theory of Planned Behaviour. One hundred and one butchers managing or owning small butcher's responded to the interview regarding their Attitudes, Subjective Norm, Perceived Behavioural Control, Personal Norm, and Knowledge with regard to their Intention to fully implement a HACCP system in their shops. Before the interviews, a certified veterinarian visited all the shops. Visits included an inspection of the establishments using the Official Portuguese Control Plan checklist for meat retailers. Conformance level measured past performance regarding food safety practices. Based on past performance, butchers were divided into “high performers” and “low performers”. “High performers” yielded high values of Attitude and Intention towards the Behaviour. For these, Attitude and Personal Norm emerge as predictors of the Intention to fully implement a HACCP system. For “low performers”, Personal Norm was the strongest predictor of Intention, with results pointing to the need for an intervention from the authorities to promote increased conformance to food safety practices. For both groups, neither Social Norm nor Perceived Behavioural Control acted as significant predictors of Intention.     

水提法提取—电感耦合等离子体质谱法测定婴幼儿配方奶粉中的碘

用水提取婴幼儿奶粉中的碘,亚铁氰化钾和乙酸锌盐析法沉淀蛋白,过滤后可以得到澄清处理液。用电感耦合等离子体质谱对提取样液进行测定,130Te作为内标物进行定量分析。该方法简便快捷,检出限为0.10 mg/kg加标回收率为90.8%~109%,相关系数0.999,精密度试验RSD2%。     

Theoretical study of a thermoelectric-assisted vapor compression cycle for air-source heat pump applications

This paper proposes a thermoelectric-assisted vapor compression cycle (TVCC) for applications in air-source heat pump systems which could enhance the heating capacity of the system. Performances of TVCC are calculated and then compared with that of basic vapor compression cycle (BVCC). The simulation results show that when coefficients of performance (COPs) of the two cycles are almost equal, the TVCC under maximum COP condition of the thermoelectric modules still performs better than BVCC by 13.0% in heating capacity through selecting the appropriate intermediate temperature. In addition, the TVCC can also achieve an improvement of 16.4%–21.7% in both the heating COP and capacity when compared with the BVCC with an assistant electric heater that is provided with the equivalent power input of thermoelectric heat exchanger. Thus, the TVCC could be beneficial to the applications in small heat pumps if there is always need for auxiliary electric heat.     

A terrain risk assessment method for military surveillance applications for mobile assets

This study proposes an analytical and flexible terrain risk assessment method for military surveillance applications for mobile assets. Considering the risk as the degree of possibility of insurgent presence, the assessment method offers an efficient evaluation of risk in the surrounding terrain for military combat operating posts or observation posts. The method is designed for unmanned aerial vehicles as the surveillance assets of choice to improve the effectiveness of their use. Starting with the area map and geographical data, the target terrain is first digitized for space representation. Then the data of nine geographical parameters are used to formulate five contributing risk factors. These factors are incorporated in an analytical framework to generate a composite map with risk scores that reveal the potential high-risk spots in the terrain. The proposed method is also applied to a real-life case study of COP Kahler in Afghanistan, which was a target for insurgent attacks in 2008. The results confirm that when evaluated with the developed method, the region that the insurgents used to approach COP Kahler has high concentration of high-risk cells.     

A design of experiments investigation into dry separation using a Knelson Concentrator

Enhanced gravity, or centrifugal, separators have revolutionised gold processing over the past decades, significantly increasing the recovery of fine (−100 μm) free gold. One of the main drawbacks of centrifugal gravity concentrators is the large volume of water required (even if it is all recycled). With water becoming an ever increasingly important “commodity”, reducing this is of importance both from an environmental and a monetary point of view. This work investigated operating a laboratory scale Knelson Concentrator with a dry feed and using air as the fluidising medium. The feed used was a synthetic mixture of tungsten and quartz, used to mimic a gold ore. The response surface method and central composite design techniques were used to design the experiments and to model the results, with the experimental variables being the bowl speed (G-Level), air fluidising pressure and the feed rate. The models corresponded well to the experimental results, indicating that for this experimental setup, the optimal conditions were a bowl G-Level of 40 G, a feed rate of 220 g/min and an air fluidising pressure of 8 psi.     

Improved method for roadside barrier length of need modeling using real-world trajectories

The 2011 AASHTO Roadside Design Guide (RDG) contains perhaps the most widely used procedure for choosing an appropriate length of need (LON) for roadside barriers. However, this procedure has several limitations. The procedure uses a highly simplified model of vehicle departure, and the procedure does not allow designers to specify an explicit level of protection. A new procedure for choosing LON that addresses these limitations is presented in this paper. This new procedure is based on recent, real-world road departure trajectories and uses this departure data in a more realistic way. The new procedure also allows LON to be specified for a precisely known level of protection – a level which can be based on number of crashes, injury outcomes or even estimated crash cost – while still remaining straightforward and quick to use like the 2011 RDG procedure.     

Development and monitoring of an integrated bioprocess for production of a potential malaria vaccine with Pichia pastoris

An engineered variant of the yeast Pichia pastoris was used to produce the potential malaria vaccine D1M1. This paper describes the implementation of an expanded bed adsorption chromatography step into a sequential cultivation process of the yeast in order to link protein expression, cell release, and product capture of the secreted protein in a fully automated plant. The process is operated with a semi-continuous strategy for an integrated production. Process improvements have been achieved using design of experiments. Resulting purities of product achieved up to 87% with recoveries of 51% in a single downstream operation. Furthermore, a multivariate analysis of historical batch data was used to develop a golden batch model for process monitoring.     

嵌入式盲文单手输入系统设计与实现

计算机录入编辑盲文是信息处理的特殊应用领域，是特殊教育中的重要研究课题。文中将盲文制作为特殊符号，通过制作字库，编写个性化码表，然后嵌入到主流输入法，从而实现盲文与汉字混排以及实现单手盲文输入。该系统具有易学易记性、盲文编码多样性、嵌入性强等优点，并通过实验证明输入盲文效率能提高5~6倍，在盲文出版、盲文印刷、盲文教学等领域有重要的应用价值。但盲文字符在不同平台(如智能手机)与不同操作系统兼容性问题还有待进一步研究开发。     

Physical Stability of Octenyl Succinate–Modified Polysaccharides and Whey Proteins for Potential Use as Bioactive Carriers in Food Systems

The high cost and potential toxicity of biodegradable polymers like poly(lactic‐co‐glycolic)acid (PLGA) has increased the interest in natural and modified biopolymers as bioactive carriers. This study characterized the physical stability (water sorption and state transition behavior) of selected starch and proteins: octenyl succinate–modified depolymerized waxy corn starch (DWxCn), waxy rice starch (DWxRc), phytoglycogen, whey protein concentrate (80%, WPC), whey protein isolate (WPI), and α‐lactalbumin (α‐L) to determine their potential as carriers of bioactive compounds under different environmental conditions. After enzyme modification and particle size characterization, glass transition temperature and moisture isotherms were used to characterize the systems. DWxCn and DWxRc had increased water sorption compared to native starch. The level of octenyl succinate anhydrate (OSA) modification (3% and 7%) did not reduce the water sorption of the DWxCn and phytoglycogen samples. The Guggenheim–Andersen–de Boer model indicated that native waxy corn had significantly (P < 0.05) higher water monolayer capacity followed by 3%‐OSA‐modified DWxCn, WPI, 3%‐OSA‐modified DWxRc, α‐L, and native phytoglycogen. WPC had significantly lower water monolayer capacity. All Tg values matched with the solid‐like appearance of the biopolymers. Native polysaccharides and whey proteins had higher glass transition temperature (Tg) values. On the other hand, depolymerized waxy starches at 7%‐OSA modification had a “melted” appearance when exposed to environments with high relative humidity (above 70%) after 10 days at 23 °C. The use of depolymerized and OSA‐modified polysaccharides blended with proteins created more stable blends of biopolymers. Hence, this biopolymer would be suitable for materials exposed to high humidity environments in food applications.