A hybrid vendor managed inventory and redundancy allocation optimization problem in supply chain management: An NSGA-II with tuned parameters

In this research, a bi-objective vendor managed inventory model in a supply chain with one vendor (producer) and several retailers is developed, in which determination of the optimal numbers of different machines that work in series to produce a single item is considered. While the demand rates of the retailers are deterministic and known, the constraints are the total budget, required storage space, vendor's total replenishment frequencies, and average inventory. In addition to production and holding costs of the vendor along with the ordering and holding costs of the retailers, the transportation cost of delivering the item to the retailers is also considered in the total chain cost. The aim is to find the order size, the replenishment frequency of the retailers, the optimal traveling tour from the vendor to retailers, and the number of machines so as the total chain cost is minimized while the system reliability of producing the item is maximized. Since the developed model of the problem is NP-hard, the multi-objective meta-heuristic optimization algorithm of non-dominated sorting genetic algorithm-II (NSGA-II) is proposed to solve the problem. Besides, since no benchmark is available in the literature to verify and validate the results obtained, a non-dominated ranking genetic algorithm (NRGA) is suggested to solve the problem as well. The parameters of both algorithms are first calibrated using the Taguchi approach. Then, the performances of the two algorithms are compared in terms of some multi-objective performance measures. Moreover, a local searcher, named simulated annealing (SA), is used to improve NSGA-II. For further validation, the Pareto fronts are compared to lower and upper bounds obtained using a genetic algorithm employed to solve two single-objective problems separately.     

Stabilization of Rössler chaotic dynamical system using fuzzy logic control algorithm

This paper proposes a fuzzy logic control algorithm (FLCA) to stabilize the Rössler chaotic dynamical system. The fuzzy logic control system is based on a Takagi-Sugeno-Kang inference engine and the stability analysis in the sense of Lyapunov is carried out using Lyapunov’s direct method. The new FLCA is formulated to offer sufficient inequality stability conditions. The asymptotic complexity of our algorithm is analyzed and proved to be lower in comparison with that of linear matrix inequality-based FLCAs. A set of simulation results illustrates the effectiveness of the proposed FLCA.     

聚氨酯涂料中游离甲苯二异氰酸酯(TDI)单体的测定方法

研究了在GB/T18446-2001方法基础上改变内标物(使用无毒性记录的十二烷代替毒性大的1,2,4-三氯代苯)测定样品中游离TDI的方法。该方法简捷、快速、准确度高、精确度高、更环保。本方法的适用范围同GB/T18446-2001。     

水热法制备氧化锆微粉的进展

二氧化锆纳米粉是制造高科技陶瓷的重要原料，水热法是目前生产纳米粉体最具发展潜力的工艺方法之一。综述了水热法（包括水热沉淀、水热氧化、水热电埋弧、微波水热等）在生产纳米二氧化锆系粉体中的应用，以及水热法的发展情况。     

Synthesis and electrochemical characterization of a new Se-doped spinel material for lithium secondary batteries

A new Se-doped spinel material, LiAl_0.18Se_0.02Mn_1.8O₄ powder with a phase-pure polycrystalline was synthesized by a sol–gel method. The material in the 3 V region (2.4 3.5 V) and both the 3 and 4 V region (2.4 4.4 V) initially deliver a discharge capacity of 81 and 178 mA h g^–1 which increase with cycling to reach 110 and 204 after 50 cycles, respectively. The material shows excellent cycleability in the 4 V region (3.0 4.4 V) with almost no capacity loss. The structural integrity of the Se-doped spinel was characterized by charge–discharge cycling tests and X-;ray diffraction.     

陶瓷材料断裂韧性测试新技术：静态爆破剂预制裂纹的研究

准确测试陶瓷材料断裂韧性Ｋ１Ｃ的关键是预制具有原生裂纹的试样。本文以单边切口梁法测试Ｋ１Ｃ为基础，提出了一种简便而有效的陶瓷材料原生裂纹的预制方法－静态膨胀法。研究结果表明：静态膨胀法中裂纹的扩展是稳态的；通过调节影响微裂纹产生与扩展的多种因素，可以准确地控制裂纹扩展的深度，预制出合适的原生裂纹，为准确评价结构陶瓷的断裂韧性提供了一种有效可行的方法。     

Pressure drop for single and two‐phase flow of non‐newtonian liquids in helical coils

New experimental results on pressure loss for the single and two‐phase gas‐liquid flow with non‐Newtonian liquids in helical coils are reported. For a constant value of the curvature ratio, the value of the helix angle of the coils is varied from 2.56° to 9.37°. For single phase flow, the effect of helix angle on pressure loss is found to be negligible in laminar flow regime but pressure loss increases with the increasing value of helix angle in turbulent flow conditions. On the other hand, for the two‐phase flow, the well‐known Lockhart‐Martinelli method correlates the present results for all values of helix angle (2.56‐9.37°) satisfactorily under turbulent/laminar and turbulent/turbulent conditions over the following ranges of variables as: 0.57 ≤ n′ ≤ 1; Re′ < 4000; Re_l < 4000; Re_g < 8000; 8 ≤ x ≤ 1000 and 0.2 ≤ De′ ≤ 1000.     

浅谈燃气轮机的清洗方法

由于燃气轮机吸收含有大量灰尘等杂质的空气,会在压气机叶片上形成积垢,从而导致机组出力下降,该文介绍在实际工作中,根据不同的情况使用不同的设备、采取不同的清洗方法来除去压气机叶片上的污垢,以提高整台机组的工作效率.     

LDPE／LLDPE共混物熔体挤出流动性的研究

考察了毛细管挤出过程中LDPE/LLDPE共混物熔体的流动行为及其影响因素。发现熔体的末端压力损失△P_(end)随LDPE的质量分数Φ_(LD)的增加而增大,并与表现剪切速率γ成指数律关系;熔体的剪切流动大体上服从指数律;熔体粘度对剪切速率的敏感性随着Φ_(LD)的增加而增强,而对温度的依赖关系可由形如Arrhenius方程的表达式描述。     

淮河流域水资源短缺风险评估与时空分析

根据2003-2013年淮河流域五省的降水量、径流系数、人均水资源量、人均GDP、人口密度等相关数据,构建水资源短缺风险评价体系,用熵权法对指标赋值,运用可变模糊模型对淮河流域及各省的水资源短缺风险进行评估和时空差异分析。结果表明:2003-2013年间淮河流域水资源短缺风险值总体较高,且呈缓慢的增长趋势,2004年降水较少,风险值达到最高;十年间河南省风险增加最为明显,而山东省较为稳定,风险增加也最低;在淮河流域五个区域中,河南省的风险程度最高,达到3.52;江苏省、山东省次之;安徽省和湖北省相对较低,达到2.86和2.51。水资源短缺风险二级指标分析发现,危险性最强的是河南省,安徽省最小;水资源短缺易损性最强的是山东省,湖北省最小;水资源短缺暴露性最强的是江苏省,山东省最小;水资源短缺可恢复性最好的是湖北省,河南省最差。同时,所有评价指标中人口密度、人均GDP、降水量对水资源短缺风险的影响较大。