锌钾硼对甜菜产质量效应及最佳施肥措施的研究

本文利用最优回归设计“310”方案,研究了黑土地甜菜 Zn、K_2O、B的效果及合理施用问题。得出甜菜块根产量、含糖、产糖量、灰分 K 和有害 N 与 ZnK_2O、B 肥回归关系显著的回归模型,分析了 Zn、K_2O、B 对上述五个指标的效应,明确了 Zn 是影响各项指标的主要因子,并采用频率筛选法,提出了兼顾上述五项指标的优质高产施肥措施。     

Urea briquette applicator for transplanted rice

A plunger-type, completely hand-operated applicator prototype, made of polyvinyl chloride (PVC), for deep placement of urea briquettes (UB), i.e., pillow-shaped urea supergranules with edges, in line transplanted rice has been developed for use by small-scale rice farmers. The field evaluation of the applicator was conducted in the Philippines during the 1989 dry season. The applicator consistently placed UB at proper depth (7 to 8 cm), which resulted in low concentrations of urea N (<7 ppm) in about 4 cm of floodwater 1 day after placement. These findings indicated that the prototype worked properly. Average work output of the applicator was 0.20 ha workday^–1 and may increase with practice. The yields of irrigated transplanted rice in the field trials show that agronomic efficiencies of hand-placed UB and applicator-placed UB were equal and were superior to those of split-applied prilled urea.     

消化吸收引进技术 完善化肥工业国产化

本文回顾了我国化肥工业国产化发展过程，论述了实现国产化的条件，并对国产化项目提出了几点建议。     

水稻强化栽培下不同氮肥管理对产量与氮素利用的影响

以籼型单季超级杂交稻中浙优1号为材料,研究水稻强化栽培氮肥管理对产量与氮素利用率的影响。结果表明:水稻强化栽培与常规栽培对照比较,增产达11.1%-15.2%,氮肥回收率比对照高5.3%~26.9%,农学利用率比对照高67.2%~92.2%,生理利用率比对照高6.0%~80.5%。因此,在水稻生产上应用水稻强化栽培可以提高氮肥的利用,降低氮肥在环境中积累及对环境造成污染。此外,本文对水稻强化栽培下氮肥管理的高产机理进行了探讨。     

化工过程熵增指数及其在磷复肥清洁生产评价中的应用

从热力学第二定律出发, 指出清洁生产的热力学本质是控制物质由有序结构向无序转化并从中获取最大效益, 其优劣可由过程熵增反映。 引用复杂体系非平衡定态过程最小熵产生原理,推导出依据与外界交换的物流和热流信息定量计算化工复杂系统过程熵增的方法, 并定义过程熵增指数ζ 。 评价了化工过程对环境热力学状态的综合影响。选择以硫和以氨为载能原料的磷复肥工艺为例进行了计算和对比,其过程熵增指数分别为6.753和4.571,反映出载能原料硫作为废物排放对环境热力学状态产生更大的影响。     

肥料防结块缓释概况及性能快速表征方法探讨

介绍了颗粒肥料结块的原因机理、影响因素和传统的处理方法。简述了缓释肥料的特点、类型、加工方法以及国内外的研究发展状况。模拟肥料贮存、运输和施用环境以及设计装置，对颗粒肥料防结块、缓释性能快速表征方法进行了有益的探讨。对不同包膜尿素的测试结果表明，所设计的肥料养分释放模拟装置具有较好的应用前景。     

浅议我国钾肥工业的可持续发展

分析了我国可溶性钾盐资源短缺 ,钾肥工业发展速度缓慢 ,钾肥生产能力远远不能满足农业需求 ,国内庞大的钾肥市场长期依靠进口解决的现状 ,介绍了我国钾肥生产工艺技术、生产能力和消费情况。提出了加入WTO后 ,我国钾肥工业可持续发展的若干建议。     

云南省硫酸磷肥工业的发展方向

论述近年来云南省硫酸磷肥工业的发展情况及今后的发展方向.到2010年,云南省硫酸产能应控制在12.5 Mt/a左右,约占全国总量的20%;磷肥产能应控制在4.1 Mt/a左右,约占全国总量的25%,其中高浓度磷复肥约占全国总量的35%以上;磷矿产量应控制在20 Mt/a左右,约占全国总量的30%,其中擦洗与浮选磷矿约占70%.     

Fertilizers and eutrophication in southwestern Australia: Setting the scene

An excess of plant nutrients has caused serious eutrophication in aquatic ecosystems of southwestern Australia manifested by excessive growth and accumulation of green and bluegreen algae. Phosphorus is generally the limiting nutrient for algal growth and phosphatic fertilizers applied to nutrient-deficient, leaching, sandy soils are the main source of P, supplemented by rural industry point sources. Nitrogen is the limiting nutrient in marine embayments with little drainage from the land. Measures to reduce the load of P delivered to drainage include basing fertilizer application rates on soil testing for P and the use of less soluble P fertilizers. Catchment management plans are being implemented with community involvement to reduce P loads and maintain agricultural production. This introductory paper reviews the history of eutrophication in southwestern Australia and of studies into its causes, principally in the large Peel-Harvey estuary. It briefly summarises other papers in this special issue concerned with different aspects of the problem: how to fertilize the land without causing eutrophication.     

Simulation of Fe-Al compounds developed during single superphosphate manufacture

In order to analyse iron phosphate complexes and gel-like phases encountered in the single superphosphate process, experiments were performed with a free-Al, Fe apatite crystal of Durango from Mexico phosphate rock and sulfuric acid. Reaction products were studied by X-ray diffraction and surface analysis methods namely X-ray photoelectron spectroscopy and scanning electron microscopy. Results show that in a free Al, Fe-system, part of the Ca(H₂PO₄ )₂.H₂O (MCPM) forms before precipitation of any CaSO₄(CS) and gel-like phase such H₂SO₄.yH₃PO₄.xH₂O is formed. When iron is added, the precipitation rate of (CS) and (MCPM) increases and Fe₃(H₃O)H₈(PO₄)₆.6H₂O is formed. When Fe and Al are added, a gel-like phase is quickly formed with a molar ratio that changes with time and develops into crystalline compounds. The composition of this gel may be represented as a mixture of two phases: H₂SO₄.yH₃PO₄.xH₂O and a gel containing Al-Fe-Si.