超高强度钢连续冷却组织和时效反应的研究EI

观察分析了冷却速度对低合金超高强度钢（４０ＣｒＭｎＳｉＭｏＶＡ）精细组织的影响。结果表明，在冷却、低温等温（或回火）过程中，钢显微组织中的马氏体或贝氏体存在时效阶段。其组织特征为呢纹花样。α和ε间的取向不满足Ｊａｃｋ关系，它属一种新的取向关系。过渡型碳化物可直接从呢纹花样区析出。     

Basic studies leading to the development of an ultrahigh strength,high fracture toughness low-alloy steel

Ultrahigh strength steels have been used increasingly in recent years for critical aircraft and aerospace structural applications. In such applications, though materials performance is of prime consideration, cost and availability makes the low-alloy steels an attractive option. This paper describes the development of an ultrahigh strength NiSiCrCoMo low-alloy steel, supported by significant findings obtained from the basic studies that were aimed at understanding how solute additions influence fracture resistance of iron, with and without the presence of carbon. The results of the basic studies, in combination with the work of Garrison (1986) on a NiSiCr steel, have profitably been employed in the development of a NiSiCrCoMo low-alloy steel possessing a strength-toughness combination quite comparable to the highly alloyed 250-grade maraging steel. Reproducibility of attractive strength and toughness properties has been established in tonnage scale melts. This steel, in the softened condition, has good formability and machinability. Weld parameters have also been established. The NiSiCrCoMo low-alloy steel thus meets the requirements of performance and cost rendering it an attractive option for advanced structural applications.     

Diffusion Behaviour of Fe-Cu Interface of Copper Brazed Double-wall Steel Tubes

By means of electron probe(EPMA),scanning electron microscope(SEM),and optical microscope(QM),the diffusion behaviour on the Fe-Cu interface of copper brazed double-wall steel tubes andthe microstructure of the diffusion layer have been investigated.There are three kinds of metallurgicalbonds between copper plating layer and steel substrate: (1)the Cu diffusing into steel substratealong grain boundary of ferrite;(2)the Cu diffusion into grain bulk of ferrite: (3)the Fe diffusing intoCu layer.The copper brazed double-wall steel tubes are formed by the combination of the diffusionsmentioned above and this is the reason for excellent mechanical and technological properties of thecopper brazed double-wall steel tubes.     

The influence of nanoadhesives on the tensile properties and Mode-I fracture toughness of bonded joints

Nanoadhesives of epoxy resin are synthesized and evaluated. They are organically modified by multiwalled carbon nanotubes (MWCNT) (1% by weight) as reinforcement. Tensile tests are conducted on multiple identical unnotched and notched specimens to evaluate the overloading and fracture behavior of the nanoadhesives and are compared with the neat epoxy resin. In comparison with the neat epoxy, it is found that the 1% MWCNT reinforcement increased the ultimate and residual strength by about 29% and 56%, respectively. In comparison with the neat resin, there is a 265% increase in the fracture toughness of the MWCNT adhesive. Fracture surface analysis revealed the various mechanisms by which the MWCNT adhesives acquire their superior strength and toughness in comparison with the neat resin.     

Pb/Sn凸剪切性能研究

在实际使用条件下,Pb/Sn凸点会由于承受温度循环而产生剪切应力,剪切应力导致的主要失效方式是开裂.通过对倒装焊后Pb/Sn凸点剪切强度的测量及对剪切后断口的分析,发现破坏主要发生在凸点下金属(UBM)层内部或UBM与Al焊盘之间,平均剪切强度受凸点尺寸影响很小,范围在21～24MPa。     

Effect of fiber types on relevant properties of porous asphalt

The research was conducted to evaluate the effects of cellulose and polyester fibers on the properties of porous asphalt mixes, using the tests of draindown, abrasion, volumetric properties, rutting, and moisture damage. Images of scanning electron microscopy and X-ray computerized tomography were adopted to identify the microstructure of the fiber and inner stone skeleton of porous asphalt. The influence of rutting parameter （G＊/sin δ） of asphalt modified by different fibers on the rutting resistance of the mixes was investigated. Based upon MOHR-COULOMB theory, the cohesion and the angle of internal friction of the mixes were derived from both indirect tension and unconfined compression strength. The experimental results indicate that fibers mainly stabilize asphalt binder and thicken asphalt film around aggregates. Furthermore, they result in the improved mechanical strength of porous asphalt mixes at high temperature slightly. From comparison analysis, cellulose fibers appear to perform better than polyester fibers in porous asphalt mixes.     

Swelling behavior induced by alteration in granite and its implications on underground excavation

Granite is commonly recognized as an ideal medium for underground construction. However, in the site investigation for Heimifeng Pumped Storage Power Station project, it was found that there are swelling behaviors induced by alteration in granite and eventually causing slaking and disintegration of rock blocks. The study shows that hydrothermal alteration in granite is primarily due to the intrusion of multi-phase igneous magma. The clay minerals, such as montmorillonite, chlorite, kaolinite, are the main causes for the swelling behavior of granite. In the exploratory adits, alteration was observed to occur mainly along faults or fractures in the rock masses and resulted in roof caving if water is present. Some of the highly altered borehole cores swell and crack within 24 h in water and eventually disintegrate completely. From the testing results on the samples, the maximum axial free swelling strain is about 1.2%, while the maximum axial confined swelling strain is around 0.1% with swelling stress less than 25 kPa. Under free swelling tests, 80% of swelling is completed within 24 hours. Under confined swelling condition, swelling process is completed within 1 h for some samples, with 80% of maximum swelling strain finished within around 22 h for most of the samples. Contraction of samples occurs after swelling completed. The strength of granite, reflected by deformation and elastic moduli, shear strength, decreases due to alteration. The deformation and elastic moduli are even lower compared to highly weathered rock. The shear strength is between that for highly weathered and slightly weathered rocks. The swelling characteristics of the altered rock present great challenges for support or lining during construction and operation stages. Support or lining shall be in place immediately after excavation. Since the rock may swell when encountering water, the shotcrete shall be designed accordingly. During the construction of access tunnel and caverns, water shall be drained in time. Drainage directly from surface shall be avoided so as to prevent floor heave.     

浅谈天然彩棉织物的质量

从生产实践出发 ,阐述了彩棉纤维物理指标对彩棉纱的性能、织物的强力、色牢度及色泽的影响。     

粘接结构超声信号的小波分解与特征提取

粘接结构因其独特的物理、机械和声学特性在诸多领域具有非常广泛的应用，对于铝合金-橡胶这样一种金属-非金属粘接结构的超声检测信号，本文利用了小波变换的多分辨率分析(时频分析)的方法，有效地提取出了反映多层材料粘接状况的信号特征，该特征提取方法可用在粘接结构的无损检测中。