磷矿中氧化钙,氧化镁测定方法的研究

用硝酸铋分离磷酸根离子，在滤液中用ＥＧＴＡ－ＥＤＴＡ分别测定氧化钙，氧化镁较之传统方法简便效果好。     

蒙脱石预处理对制备柱撑蒙脱石的促进作用研究

在制备柱撑蒙脱石的过程中，首次提出了蒙脱石的预处理工艺，并以莱西钙基膨润土为原料，研究了预处理方法、预处理时间、料浆浓度、分散剂种类及用量对蒙脱石分散程度的影响，将钙基蒙脱石颗粒分散达到0.964 μm。经过预处理后，用钙基蒙脱石直接制备柱撑蒙脱石，并用SEM、XRD、DTA-TG和SRF等进行了表征。经300 ℃焙烧2 h后，其层间距为1.262 nm，热稳定性达588 ℃，此法省去了蒙脱石的钠化改性，简化了制备工艺。     

CaB6陶瓷研究的进展

综合介绍了CaB6陶瓷粉末、多晶体和单晶体的制备方法。评述了各种方法的基本原理和特点。合成CaB6粉末最常用的方法为碳化硼法，此方法能够以低成本制备较纯的CaB6粉末。但是得到的粉末具有硬团聚现象，使CaB6粉末的烧结有一定的难度。由于CaB6在高温下具有高的化学活性和低的塑性,CaB6多晶多采用热压烧结的方法在高温高压下制备。单晶的制备主要采用区熔法和熔剂法。区熔法适合于生产大尺寸的CaB6单晶，而铝熔剂法制备的CaB6单晶尺寸最大为5mm，对测定其某些物理性能有一定的局限。对CaB6陶瓷的应用及国内外研究现状作了简要的概括，并对其今后的发展趋势作了展望。     

Synthesis and properties of polyimide (containing naphthalene) nanocomposites with organo‐modified montmorillonites

2,7‐Bis(4‐aminophenoxy) naphthalene (BAPN), a naphthalene‐containing diamine, was synthesized and polymerized with a 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) to obtain a polyimide (PI) via thermal imidization. To enhance the thermal and mechanical properties of the polymer, PI–Montmorillonite (MMT) nanocomposites were prepared from a DMAc solution of poly(amic acid) and a DMAc dispersion of MMT, which were organo‐modified with various amounts of n‐dodecylamine (DOA) or cetylpyridium chloride (CPC). FTIR, XRD, and TEM (transmission electron microscopy) were used to verify the incorporation of the modifying agents into the clay structure and the intercalation of the organoclay into the PI matrix. Results demonstrated that the introduction of a small amount of MMT (up to 5%) led to the improvement in thermal stability and mechanical properties of PI. The decomposition temperature of 5% weight loss (T_d,5%) in N₂ was increased by 46 and 36°C in comparison with pristine PI for the organoclay content of 5% with DOA and CPC, respectively. The nanocomposites were simultaneously strengthened and toughened. The dielectric constant, CTE, and water absorption were decreased. However, at higher organoclay contents (5–10%), these properties were reduced because the organoclay was poorly dispersed and resulted in aggregate formation. The effects of different organo‐modifiers on the properties of PI–MMT nanocomposite were also studied; the results showed that DOA was comparable with CPC. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

多孔碳酸钙陶瓷-人造珊瑚的研究

天然珊瑚有三维贯通的多孔网络结构，它的主要成分碳酸钙(CaCO3)在人体环境可降解。模拟珊瑚的组成与结构，研制新型的组织工程支架材料有着良好的应用前景。本文探索了多孔碳酸钙陶瓷的制备方法，并通过盐析法制备了一种多孔的碳酸钙陶瓷，有望获得高的孔隙率和孔连通性。     

提高镁回收率的途径及效益分析：白云石碳酸化法生产轻质碳酸镁新工艺研究

本文提出了白云石碳酸化法生产轻质碳酸镁，二次碳酸化法新工艺的理论依据、实验结果及技术经济分析。     

聚氯乙烯／蒙脱土复合材料的结构与性能研究

采用熔融共混法制备得到PVC／蒙脱土复合材料。通过X射线衍射和透射电镜对复合材料的结构进行了表征。研究了钠基蒙脱土和烷基季铵盐改性的有机蒙脱土对聚氯乙烯／蒙脱土复合材料的结构、加工热稳定性、光学性能、力学性能和结构流变性能的影响。     

浸没循环撞击流反应器制备牙膏用磷酸氢钙

采用浸没循环撞击流反应器（SCISR），以焦磷酸钠和磷酸三镁为稳定剂，以磷钙液和石灰乳为原料，通过中和反应法制备出了平均粒度10μm的牙膏用微细磷酸氢钙；探讨了反应温度、熟化时间、反应器装填系数、反应终点pH、磷钙液质量浓度等对产品质量的影响。确定了最优操作条件：磷钙液质量浓度1．17～1．19kg／m^3，反应温度42℃，熟化时间2h，反应终点pH6．3，反应器装填系数0．75。得到产品符合HG3257—2001标准。     

聚丙烯／轻质碳酸钙／三单体固相接枝物复合体系结构与性能的研究

将聚丙烯与马来酸酐、甲基丙烯酸甲酯、丙烯酸丁酯三种单体的固相接枝物应用于聚丙烯侥质碳酸钙复合体系，研究接枝物对复合体系力学性能、微观形态和耐热性等的影响。结果表明，在PP中加入CaCO3进行填充改性，在一定用量的三单体固相接枝物作用下，PP的力学性能及耐热性得到明显的提高。     

Films formed from polystyrene latex/clay composites: A fluorescence study

This study reports a steady-state fluorescence (SSF) technique for studying film formation from surfactant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (t₃) of polystyrene. During the annealing processes, the transparency of the film improved considerably. Scattered light (I_s) and fluorescence intensity (I_p) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I_tr. Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite films. Minimum film formation temperature, T_q, and healing temperatures, T_h, were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.