溶液法制备高接枝率HDPE-g-MAH

用溶液法制备了HDPE -g -MAH,并讨论了单体、引发剂用量、反应温度、反应时间、投料方式等因素对产物接枝率的影响。     

SMB色谱分离过程计算机仿真

针对模拟移动床(SMB)综合速率模型，采用有限元法和正交配点法分别对柱向和颗粒径向模型进行离散化，利用MatLab ODE求解器对SMB过程进行数值求解。通过仿真，验证了该方法的可行性。     

GRAPHICAL PROCEDURE FOR REACTIVE DISTILLATION SYSTEMS

In this paper we analyze a ternary reactive distillation system, where an equilibrium chemical reaction occurs in the liquid phase. By using a set of transformed variables proposed by Barbosa el al. (1988b) and well known graphical procedures for non-reactive systems; the minimum reflux ratio, minimum number of equilibrium stages, mass and energy balances for a reactive column and flash can be easily obtained. The procedures developed in this paper are applied to ISOBUTYLENE-METHANOL-MTBE system.

The main objective in developing this model is to obtain, as much as possible, rigorous information for the analysis of one reactive distillation column in a Process Simulator with capability of handling this type of new operation.     

醇-水法制备纳米NiO粉末的正交实验研究

纳米NiO粉末具有良好的催化性能、热敏性能及在各种材料中的加工性能,因而被广泛地应用在催化剂、磁性材料、电子元件材料等方面,是一种很有前途的新型功能材料。选用Ni(NO3)2.6H2O为原料,以NH4HCO3为沉淀剂,在醇-水介质中制得了纳米NiO粉末。通过扫描电子显微镜(SEM)对NiO粉末进行了表征。实验过程中,按正交表L8(27)安排了正交实验,通过方差分析确定了醇-水制备纳米NiO粉末的最佳煅烧时间、煅烧温度和醇-水比,并确定了各因素对制备过程的影响程度。     

Al/NiO复合粒子的制备与表征

以N i(NO3)2.6H2O和CO(NH2)2为主要原料,通过均匀沉淀法,90℃恒温12 h,异相成核,在片状金属铝粉表面包覆一层N i2CO3(OH)2,制备出包覆式复合粒子A l/N i2CO3(OH)2。将复合粒子在马弗炉中400℃恒温灼烧2 h,制备出了A l/N iO复合粒子。通过SEM、XRD及粒度测试等分析方法,对复合粒子的形貌、晶体结构及粒径进行了表征。     

双季戊四醇收率与反应条件依赖关系研究

利用均匀设计法，通过少量实验，使用计算机回归出双季戊四醇收率与反应条件间的依赖关系：Ｙ＝４．１４１８＋０．０８９ｘ＿１－１０．０８ｘ＿２＋８３．０１８ｘ＿３－０．１２９ｘ＿４－２９．６３８ｘ，其表明增加反应温度和降低甲醛与乙醛配比都可以增加双季戊四醇的收率，结果与实验相吻合。用回归方程得到的优化条件进行实验得到的双季戊四醇收率为２５．４％，与预测值很接近。     

模板浸润法制备非极性聚合物纳米管和纳米线

以孔径为200 nm的多孔阳极氧化铝(AAO)为模板,采用聚合物溶液或熔体浸润模板的物理方法,以非极性通用聚合物为原料,首次制备了非极性聚合物纳米管、纳米线及其阵列结构。对纳米管和纳米线的形貌和结构进行了表征,结果表明对非极性聚合物而言,温度是影响一维纳米结构的主要因素,在较低温度下只能制得纳米线;较高温度下才能得到纳米管。还指出AAO膜纳米孔的高表面效应与熔体的作用能是形成聚合物一维纳米结构的主要驱动力。     

五种化合物临界温度和临界压力的测定

The critical properties of five compounds,including propanal,butanal,1-pentanal,2-methel butanal and trimer of ethanal,were determined for the first time by a new capillary quick-flow method. The apparatus was improved with a capillary tube and checked with hexane and 1-heptene as standard reagents. The experimental results proved that the determination of critical properties by quick-flow method with a capillary tube apparatus was successful.     

水性聚氨酯材料配方设计技巧

介绍了优选法的0.618法和分数法,对其进行改进创新和原理证明,并应用于生产涂料配方设计中。     

Mineral nutrition of slash pine in subtropical Australia. II. foliar nutrient response to fertilization

In the previous paper, we reported the stand growth of slash pine (Pinus elliottii) during the first 11.5 years of plantation in response to (1) initial fertilization at plantation establishment with P rates of 11, 22, 45 and 90 kg P ha^–1 which were either banded or broadcast in the presence or absence of basal fertilizers containing 50 kg N ha^–1, 50 kg K ha^–1 and 5 kg Cu ha^–1 and (2) application of additional 40 kg P ha^–1 at age 10 years. Here we present the responses in foliar nutrient concentrations of slash pine in the first 11.5 years to the initial fertilization and the additional P applied at age 10 years.Foliar N and K concentrations in the first 9.6 years of plantation decreased with the initial P rate. Application of the basal fertilizers improved foliar Cu concentration. Foliar Ca and Mg concentrations increased linearly with the initial P rate. The initial fertilization did not affect foliar Mn concentration in the first 9.6 years. Foliar P concentration increased quadratically with the initial P rate, which accounted for 77–86% of the variation in foliar P concentration. Most of the explained variation in foliar nutrient concentrations was attributable to the plantation age except for foliar P concentration. In the case of foliar P concentration, 53% was explained by the initial P rate, 31% by the plantation age and 2% by the positive interaction between the initial P rate and the plantation age. Foliar P concentration of slash pine at age 11.5 years increased quadratically with the initial P rate and linearly with the additional 40 kg P ha^–1 applied at age 10 years, accounting for 81% of the variation in the foliar P concentration. Foliar nutrient analysis indicated that P was the major limiting nutrient affecting the stand growth of slash pine in the first 11.5 years.