近终形薄带连铸工艺技术比较

近终形薄带连铸是钢铁工业简化工序，节能降耗，降低成本最具有竞争能力的一项重大新工艺技术，本文报导了世界各先进工业国近年来开展研究的最新成果，分析比较了诸多机型的优缺点，并提出了突破工艺技术的技术关键和建议。     

Rapid Prototyping and Tooling of Custom-Made Tracheobronchial Stents

Rapid prototyping (RP) and rapid tooling (RT) techniques can be applied to the field of medicine primarily because of their ability to produce customised profiles and geometries in relatively short lead times. In this paper, the process by which these techniques can be applied for the production of customised tracheobronchial stents for the purpose of maintaining patency in an occluded respiratory tract is described. A comparison of RP systems was carried out to establish the preferred RP method to produce the master model. The vacuum casting RT process was then used to produce the stent.     

涟钢连铸优质钢的实践分析

本文介绍涟钢第一炼钢厂１号小方坯连铸机浇铸优质钢的生产实践，并探索连铸优质钢的途径。指出为保证质量，必须严格保证钢水质量，控制合适的浇铸温度，拉坯速度和冷却强度；钢水必须吹氩；采用大容量中间包和伸入式水口保护渣浇涛，确保连铸机的状况良好。     

极压聚脲基润滑脂在CSP薄板坯连铸机上的应用

根据CSP薄板坯连铸机的工况特点，基于合理润滑的原则，论述了JZEP极压聚脲基润滑脂在CSP薄板坯连铸机上的成功应用。     

Study on Numerical Simulation of Mold Filling and Solidification Processes under Pressure Conditions

The mold filling and solidification simulation for the high pressure die casting (HPDC) and low pressure die casting (LPDC) processes were studied.A mathematical model considering the turbulent flow and heat transfer phenomenon during the HPDC process has been established and paralled computation technique was used for the mold filling simulation of the process.The laminar flow characteristics of the LPDC process were studied and a simplified model for the mold filling process of wheel castings has been developed.For the solidification simulation under pressure conditions,the cyclic characteristics and the complicated boundary conditions were considered and techniques to improve the computational efficiency are discussed.A new criterion for predicting shrinkage porosity of Al alloy under low pressure condition has been developed in the solidification simulation process.     

连铸坯的液芯轧制

研究了连铸坯的液芯轧制，并结合日本川崎永岛厂的实例，证实了连铸坯液芯轧制的可行性，指出了钢锭和连铸坯液芯轧制的区别，及如何制造压应力状态，推导了坯壳应力与轧辊直径压下量，坯壳厚度的关系，并提出了用振摆式轧机实施连铸机液芯轧制的方案。     

Ray-cast volume rendering accelerated by incremental trilinear interpolation and cell templates

Two related ideas for improving the speed of ray-cast volume rendering are studied in this paper. The first is an incremental algorithm for trilinear interpolation, a method commonly used in ray-cast volume rendering to calculate sample values. The incremental algorithm can expedite trilinear interpolation when many samples along a ray are located in one cell. The second is an efficient hybrid volume rendering restricted to parallel projection. In the preprocessing stage, acell template is created to store the information used by the incremental trilinear interpolation. When a cell is parallel projected, the information is retrieved from the template to compute the cell contribution. Because the algorithm with only one template may cause aliasing, an antialiasing technique exploiting multiple cell templates is proposed. With our method, ray-cast volume rendering can be accelerated considerably.     

防止大型筒类薄壁件冷裂的工艺措施

采取了加强铸件薄弱断面处强度和提高砂芯整体“宏观”退让性八项工艺措施，有效地防止大型筒类薄壁件冷裂纹缺陷     

国内外薄带连铸技术的发展与现状

文章就法国，美国，日本，意大利，英国，韩国，德国，澳大利亚和中国在薄带连铸工艺，设备和自动控制研究方面的进展作了介绍与分析。     

连铸结晶器保护渣自动加渣器

分析了常规结晶器保护渣自动加渣器存在的问题；指出了开发新结晶器保护渣自动加渣器应遵循的原则；提出了改进结晶器保护渣自动加渣器的措施；给出了新型结晶器保护渣自动加渣器得到的实际效果。