Numerical study on erosion of a pipe bend with a vortex chamber

Abrasive erosion at bend is a common issue in gas–solid pneumatic system. Vortex chamber design is one of the specialized designs that offers promising prospect at reducing erosion. The performance of design is still relatively unknown in the literature. The aim of this work is to study the effect of basic erosion variables such as the flow Reynolds number, the particle Stokes number, and the vortex chamber size. The results show that the vortex chamber always reduces the erosion in comparison to the common radius bend, and it is more effective at higher Reynolds number. Increasing the chamber size reduces the erosion but the most significant reduction happens when the chamber size to the pipe diameter ratio is increased from 1 to 1.25. The chamber size influences the erosion differently at different Reynolds number. Trends describing these effects were obtained through trial-and-error approach. The particle Stokes number has nonunique effect on erosion. Increasing Stokes number through increasing Re increases the erosion while increasing Stokes number through decreasing Re_p decreases the erosion.     

Analysis of roof and pillar failure associated with weak floor at a limestone mine

A limestone mine in Ohio has had instability problems that have led to massive roof falls extending to the surface. This study focuses on the role that weak, moisture-sensitive floor has in the instability issues.Previous NIOSH research related to this subject did not include analysis for weak floor or weak bands and recommended that when such issues arise they should be investigated further using a more advanced analysis. Therefore, to further investigate the observed instability occurring on a large scale at the Ohio mine, FLAC3 D numerical models were employed to demonstrate the effect that a weak floor has on roof and pillar stability. This case study will provide important information to limestone mine operators regarding the impact of weak floor causing the potential for roof collapse, pillar failure, and subsequent subsidence of the ground surface.     

A Low‐Cost Method to Evaluate Absorber Reflectivity Using an Antenna with a Small Radiating Aperture and Frequency‐Domain Instrument

We propose a way to measure the absorber reflectivity at a low cost. Only one simple antenna with a small radiating aperture and a frequency‐domain instrument are utilized. The previously used equation for calculating the reflectivity of an absorber is inaccurate, and, therefore, a new equation is derived based on multiple reflection analysis and three test models. Notably, the reflection coefficient of the antenna is included in the derived equation. The accuracy of the proposed method is proven through simulation and measurements. It can be easily applied to a product examination by absorber manufacturers and customers owing to its advantages of simplicity, cost effectiveness, and non‐cutting examination.     

Comparison of different peeling systems for kiwifruit (Actinidia deliciosa,cv Hayward)

Galicia (N.W. Spain) produces 60% of Spanish kiwifruit (Actinidia deliciosa) and 5–20% of these are ‘destrío’ fruits, which do not reach market size and the appropriate form. These rejected fruits can be processed into products, thus increasing their added value. The processing of kiwifruit always includes a peeling operation, which can be performed by different systems. The most suitable conditions for caustic peeling and thermal peeling were established. Then, the two peeling systems were compared with manual peeling with the aim of selecting the best system to remove the peel of the ‘destrío’ kiwifruit. The fruits, once harvested, were stored in a cold chamber at 0 °C. Before processing or marketing kiwifruits, it is necessary to remove them from storage in cold chamber and storage at room temperature. In this study, different storage times at room temperature before peeling kiwifruits were also tested. The best system for peeling the kiwifruit was thermal peeling as this system resulted in the lowest weight loss and preserved the green colour characteristic of the kiwifruit. The best time for peeling the kiwifruit was after 8 days of storage at room temperature, after being removed from the cold chamber.     

大跨度高层建筑结构转换层施工技术

某高层建筑结构转换层具有高、大、重的特点。介绍了该高层建筑结构转换层高大模架的设计、施工方法、转换层大体积混凝土浇筑、测温、安全质量措施和应用效果,实践表明是可行的。     

A test method for evaluating the thermal environment of underground coal mine refuge alternatives

Since 2009, the Mine Safety and Health Administration(MSHA) has required mines to install refuge alternatives(RAs) in underground coal mines. One of the biggest concerns with occupied RAs is the possible severity of the resulting thermal environment. In 30 CFR 7.504, the maximum allowable apparent temperature(AT) for an occupied RA is specified as 35 °C(95 °F). Manufacturers must conduct heat/humidity tests to demonstrate that their RAs meet the 35 °C(95 °F) AT limit. For these tests, heat input devices are used to input the metabolic heat of actual miners. A wide variety of test methods, sensors, and heat input devices could be used when conducting such tests. Since 2012, the National Institute for Occupational Safety and Health(NIOSH) has conducted over thirty 96-hour heat/humidity tests on four different RAs. This paper discusses the test equipment and procedures used during these investigations. This information is useful for RA manufacturers conducting RA heat/humidity tests, for other researchers investigating RA heat/humidity buildup, and for those who need to assess the thermal environment of any confined space where people may be trapped or are seeking refuge.     

环氧自流平2mm厚地坪施工方案

结合环氧自流平地面性能特点及环氧自流平地坪设计概况,对基土、基层、结合层、面层施工工艺进行了介绍,并提出相关施工质量保证措施及成品保护等措施,从而保证了施工质量,对该施工工艺具有积极的推广作用。     

LPM填充体混凝土空心楼盖施工技术

清华大学综合科研楼采用LPM填充体空心楼盖。介绍该楼盖的构造、施工流程和轻质管抗浮等技术措施。为保证楼盖质量,应重视组合模件的安装铺设和各专业工种的沟通配合。     

Design and Analysis of MEMS Comb Drive Capacitive Accelerometer for SHM and Seismic Applications

This work presents the design of a MEMS accelerometer that is specifically intended for Structural Health Monitoring (SHM) applications where sensing low frequency low amplitude accelerations with high resolution is essential. The surface micromachined comb drive capacitance accelerometer structure has been considered in this design. The simulation experiments conducted on these devices using IntelliSuite MEMS design tool show that it has excellent displacement sensitivity of 21.39 μm/g, a capacitive sensitivity of 1.22 pF/g and voltage sensitivity of 1783 mV/g/V when it is designed to measure 0–0.1 g. Further, it is seen that it has a very low noise floor of 1.32 μg/√Hz and therefore high resolution. Since the accelerations can be as low as 0.04 g in SHM applications, excellent resolution is the primary goal in this design. Further, one more sensor specifically meant for strong motion seismic application has also been reported. This device has a bandwidth of 0–250 Hz and a noise floor of 5.612 μg/√Hz in addition to a sensor level voltage sensitivity of 97.9 mV/g/V. Finally, the comparison of these results with other similar devices reported in the past clearly illustrates the comparable performance of the present devices. Further, these devices, unlike the commercial low frequency accelerometers and other similar devices reported in the past can be fabricated by surface micromachining and CMOS compatible processes.