Increasing Reliability in Cable-Free Radio LANs Low Level Forwarding in HIPERLAN

Radio LANs are emerging in the computing world. They are supported by distinct configurations: on the one hand radio LANs with base stations and a wired backbone, on the other hand radio LANs implementing Intra-forwarding. Adding a new node in a radio LAN with Intra-forwarding, increases the reliability, while this reliability decreases with ad hoc or hub configurations. This advantage of Intra-forwarding is quantified. Intra-forwarding, as defined in the HIPERLAN standard, is based on a hop-by-hop policy and link check procedures. It is shown how point-to-point packets and broadcast packets are forwarded. The three basic components of Intra-forwarding needed to build and update the Intra-forwarding database are described. The originality of this approach is the use of multipoint relays which enable better scalability. The correctness of the Intra-forwarding protocol is proved and its cost is evaluated.     

The development of MHD cold wall channels in the oil-fired condition

The durability of a cold wall MHD generator consisting of metal electrodes and alumina-coated peg insulators was experimentally examined in the oil-fired MHD condition with the additive of SO₂ corresponding to S = 0.54 wt%. The structure of the electrode wall and various anode and cathode materials were tested, with particular reference to developing long-life electrodes. It was clarified that Pt, SHOMAC (28.8 Cr−1.9 Mo) and SUS-304 as anodes and W---Cu (70 W−30 Cu) and WC---Ag (60 WC−40 Ag) alloys as cathodes were promising for durability and that the structure of an anode divided into two elements connected to each other with an SnO₂ resistor was very useful for uniformity of the anode corrosion pattern and the inter-anode voltages. It is reasonable to expect, from the test results, that the lifetime of a cold wall MHD generator in an oil-fired commercial plant will be over 4000 h, and therefore, a foundation for its commercial use has been established.     

Hebbian无导师学习原理的盲均衡：（Ⅱ）非最小相位通道

本文介绍了根据信号码的相互独立性，利用噪声情况下盲信号分离的原理，实现非最小相位通道特性的盲均衡。     

RS码频域编译码的计算机模拟

频域编译码是近年来由Ｂｌａｈｕｔ等人提出来的纠错码编译方法。本文介绍了在时域和频域编译ＲＳ码的基本方法，并给出了在移动信息道的简单分群Ｍａｒｋｏｖ模型下频域编译码的计算机模拟方法和结果。     

一种用模拟信道进行数字通信的方法

本文介绍了一种利用现有机载模拟通信设备进行数字通信的高性能机载报警系统。文中，着重论述了该系统在编码和解码技术方面，提高报警信号的抗干扰性、保密性、防止误码以及提高传输距离等关键技术；较详细地介绍了系统的工作原理及调制解调电路的特点。     

背景噪声限下直接检测光PPM编码系统的性能研究

本文研究了背景噪声限下采用编码的直接检测光ＰＰＭ系统的性能，分析了具有不同码率的采用硬判决译码的ＲＳ码，采用最大似然（ＭＬ）译码的卷积码的性能及未编码的ＰＰＭ系统的性能，给出了相应的误比特率和每信息比特信噪比的关系曲线。结果表明：对背景噪声限下的直接检测光ＰＰＭ系统，随着码率的降低，编码不一定能改善系统性能。     

平衡纵剖面数值试验及其对防洪的影响研究

本文采用一维非恒定流非均匀沙的水沙数学模型，以长江中游螺山汉口河段为背景，进行了根化数值模拟试验，分析了该概化河段平衡纵剖面的变化规律及其与上游来水来沙条件的关系，并和相应的理论公式进行了比较。在此基础上，对水沙条件发生较在变化时的平衡纵比降以及带来的对长江中下游防洪的影响进行了分析。     

《关于加强嫩江松花江近期防洪建设的若干意见》论证概要

水利部《关于加强嫩江松花江近期防洪建设的若干意见》近期已由国务院办公厅批转有关省、自治区和国务院有关部门执行。本文简单介绍了《关于加强嫩江松花江近期防洪建设的若干意见》编制过程中对设计洪水、防洪标准、工程布局和非工程措施的论证情况和主要结论。     

受干扰波相位测量的一种新方法

为了测量受噪声和谐波干扰的两个信号间的相位差，基于自适应带通滤波器（ABF）和测量信道交换技术，提出了一种新的测量方法。ABF采用可编程开关电容滤波器（PSCF）和锁相环，明显地抑制了噪声和谐波干扰，频率跟踪范围超过四个倍频程（0．5Hz-6kHz）。用微处理器控制4个开关来交换测量信道，可以基本上消除测量通道引入的附加相位移。两种方法结合提高了相位差的测量精度。实验说明了该测量方法的有效性，该方法也适合于被测信号为慢时变情况。     

一种适用于高数据速率和高速移动环境的新型信道估计方法——双正交通道信道估计方法

本文给出了一种适用于高数据速率和高速移动环境下的新型有效的信道估计方法-双正交通道信道估计方法(CETOC,Channel Estimation by using Two Orthogonal Channels),这种信道估计方法通过采用两个独立通道的联合估计,可以有效的克服快衰落的影响,从而使得在快衰落信道下应用多维状态调制成为可能.