胶溶法合成 TiO_2超微粒子

用胶溶法合成了 TiO_2超微粒子。研究了反应物浓度、胶溶剂用量、胶溶温度对胶溶过程的影响,以及表面活性剂 DBS 的量与 Ti 萃取率的关系。探讨了合成超微粒子 TiO_2的最佳条件,分析了产品的特性。200℃热处理得到的产品为非晶型圆球状,粒度均匀,平均6.0nm,在许多有机溶剂中具有良好的分散性和透明性。550℃得到晶态锐钛矿型超微粒子 TiO_2,粒度为8.5nm。700℃热处理得到金红石型TiO_2,粒度为33.2nm。     

化学水汽监督存在的问题及建议

水汽监督是化学监督的主要内容。通过提高水汽品质，可以防止和减缓热力设备腐蚀、结垢、积集沉积物，提高设备的安全性，延长设备的使用寿命。针对目前河北南部电网化学水汽监督工作中存在的主要问题进行了分析，提出了改进措施和处理建议。     

Provision of accuracy for quantitative determination of small amounts of components: Principles of resolving the problem and their realization

Versions are suggested for resolving the problem of monitoring the accuracy of determining small amounts of components in samples of substances and materials. __________ Translated from Izmeritel'naya Tekhnika, No. 1, pp. 52–57, January, 2006.     

某供用电综合楼地下基础底板堵漏防水技术

结合工程概况，分析了负二层地下基础底板渗漏的原因，介绍了防水堵漏方案的设计与优选以及主要施工工艺，实践证明，该工程堵漏防水技术可靠，效果良好，保证了工程的顺利进行。     

环氧玻璃钢衬里在化工设备中的应用

本文叙述了非标准化工设备的环氧玻璃钢防腐衬里工艺、配方及使用考查结果．     

半导体元件清洗技术浅谈

随着社会的进步和科学技术的迅猛发展,对洗净技术的要求也越来越高。清洗方式多种多样,但最主要的是突出在喷射清洗和超声波清洗两大方面,应用于全国各行各业,并且也得到了明显进步。     

煤矸石作水泥混合材的活化方法研究

论述了煤矸石用作水泥混合材时如何激发其活性的若干方法 ,介绍了通常所用的热激活、物理激活和化学激活煤矸石的机理。实验显示了各种激活方法的效果 ,近而讨论了提高煤矸石活性时应注意的问题     

化纤大型设备支承钢结构的设计与校核

通过大型结构设计及安装实例,演绎各要求计算及校核方法,并对此设计有较好评价,具有推广意义。     

A positive‐working photosensitive polyimide based on thermal cross‐linking and acidolytic cleavage

A novel positive‐working photosensitive polyimide (PSPI) based on a poly(hydroxyimide) (PHI), a crosslinking agent having vinyl ether groups, and a photoacid generator (PAG) was prepared. The PHI as a base resin of the three‐component PSPI was synthesized from 4,4′‐oxydiphthalic anhydride and 2,2′‐bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane through ring‐opening polymerization and subsequent thermal cyclization. 2,2′‐bis(4‐(2‐(vinyloxy)ethoxy)phenyl)propane (BPA‐DEVE) was used as a vinylether compound and diphenyliodonium 5‐hydroxynaphthalene‐1‐sulfonate was used as a PAG. The phenolic hydroxyl groups of the PHI and the vinyl ether groups of BPA‐DEVE are thermally crosslinked with acetal structures during prebake step, and the crosslinked PHI becomes completely insoluble in an aqueous basic solution. Upon exposure to UV light (365 nm) and subsequent postexposure bake (PEB), a strong acid generated from the PAG cleaves the crosslinked structures, and the exposed area is effectively solubilized in the alkaline developer. The dissolution behavior of the PSPI containing each 11.5 wt % of BPA‐DEVE and of the PAG was studied after UV exposure (365 nm) and PEB. It was found that the difference in dissolution rates between exposed and unexposed areas was enough to get high resolution. A fine positive pattern with a resolution of 5 μm in a 3.7‐μm‐thick film was obtained from the three‐component PSPI. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Iodide mediated electrolysis of acidic coke/coal suspension

Hydrogen is among the emerging energy vectors that are being developed to replace nonrenewable hydrocarbon energy sources. The preferred method to produce hydrogen without generating greenhouse gases is the electrolysis of water using renewable energy. The reduction of energy during the water electrolysis process is a desirable goal regardless of the source of electric power. Similar to ferrous/ferric mediation, iodide can be used as a mediator in the electrolysis of an acidic suspension of coke or coal. The iodide ion is oxidized at a far lower anodic potential than the alternative oxygen evolution reaction. This reduces the cell electrolysis voltage and, consequently, reduces electricity use. The iodide consumed at the anode is continuously regenerated by chemical reaction with the coke/coal in suspension.