发酵法生产医药用透明质酸

山东临朐华元生物工程有限公司通过对菌株的筛选培育、发酵原料配方和工艺的改进、提纯工艺和设备的优化、制粉工艺和设备的改进、生产环境的改造,利用生物工程技术发酵法研制生产出医药用透明质酸,并形成1.5t/a的生产规模。产品应用于眼科手术、滴眼液、手术防粘连等方面,改变了国内医药用透明质酸依赖进口或动物器官提取法微量生产自用的局面,为国内以透明质酸为基质的制剂产品发展打下了基础。     

2，4－二硝基－6－氰苯胺的合成研究

以水杨酸为原料，经硝化、酰卤化、氨化等三步反应，得到重要的染料中间体２，４－二硝基－６－氰苯胺，总收率７０．５％。     

Methyl tert-butyl ether decomposition over heteropoly acid catalyst in a cellulose acetate membrane reactor

In this study the methyl tert-butyl ether (MTBE) decomposition over H₃PW₁₂O₄₀ was carried out in a cellulose acetate membrane reactor. The permeability of methanol through the cellulose acetate membrane was about 30 and 300 times higher than that of either isobutene or MTBE, respectively. The isobutene selectivity in the fixed bed reactor was only slightly higher than the methanol selectivity due to the side reaction. In the cellulose acetate membrane reactor, however, the isobutene selectivity in the rejected stream was 68% and the methanol selectivity in the permeated stream was up to 97%. The MTBE conversion in the membrane reactor was about 7% higher than that in the membrane-free fixed bed reactor under the same reaction conditions. The enhanced performance of the membrane reactor in this reversible reaction was mainly due to the selective permeation of methanol which resulted in a methanol-deficient condition suppressing MTBE synthesis reaction.     

Promotional effect of hydroxyl on the aqueous phase oxidation of carbon monoxide and glycerol over supported Au catalysts

Gold particles supported on carbon and titania were explored as catalysts for oxidation of CO or glycerol by O₂ at room temperature in liquid-phase water. Although Au/carbon catalysts were not active for vapor phase CO oxidation at room temperature, a turnover frequency of 5 s⁻¹ could be achieved with comparable CO concentration in aqueous solution containing 1 M NaOH. The turnover frequency on Au/carbon was a strong function of pH, decreasing by about a factor of 50 when the pH decreased from 14 to 0.3. Evidently, a catalytic oxidation route that was not available in the vapor phase is enabled by operation in the liquid water at high pH. Since Au/titania is active for vapor phase CO oxidation, the role of water, and therefore hydroxyl concentration, is not as significant as that for Au/carbon. Hydrogen peroxide is also produced during CO oxidation over Au in liquid water and increasing the hydroxyl concentration enhances its formation rate. For glycerol oxidation to glyceric acid (C₃) and glycolic acid (C₂) with O₂ (1–10 atm) at 308–333 K over supported Au particles, high pH is required for catalysis to occur. Similar to CO oxidation in liquid water, H₂O₂ is also produced during glycerol oxidation at high pH. The formation of the C-C cleavage product glycolic acid is attributed to peroxide in the reaction.     

Surface chemistry and kinetics of the hydrolysis of isocyanic acid on anatase

In order to meet the stricter NO_x and particulate emission limits for commercial vehicles, the selective catalytic reduction (SCR) with urea is currently seen having the highest potential. The conversion of urea into ammonia and carbon dioxide consists of two consecutive reactions, in which isocyanic acid is an intermediate that is hydrolyzed over TiO₂. The intrinsic kinetics and the surface chemistry for this reaction are explored. Up to a temperature of 132 °C the reaction was in the intrinsic kinetic regime (E_A = 73 kJ/mol), while at higher temperatures the reaction was limited by pore and external diffusion constraints, respectively. In the presence of NO, NH₃ and NO₂, the catalytic activity was negatively influenced, increasing in severity in the sequence mentioned indicating that nitrates formed from NO₂ were most effective in blocking cations and anions of TiO₂. IR spectroscopy indicates that dissociative adsorption of HNCO on TiO₂ forms Ti–NCO and hydrogen bonded OH species. In the presence of water, isocyanic acid was so rapidly hydrolyzed that only adsorbed ammonia was observed on the catalyst surface. The presence of NO, NH₃ and NO₂ retards hydrolysis leading to the appearance of isocyanate species on the surface.     

Effect of bentonite on the physical properties and drug‐release behavior of poly(AA‐co‐PEGMEA)/bentonite nanocomposite hydrogels for mucoadhesive

A series of nanocomposite hydrogels for mucoadhesive were prepared from acrylic acid, poly(ethylene glycol) methyl ether acrylate, and intercalated bentonite clay by photopolymerization. The microstructures were identified by X‐ray diffraction (XRD). Results showed that the swelling ratio for the present nanocomposite hydrogels decreased with an increase of bentonite, whereas the gel strength and Young's modulus of the present gels increased with an increase of bentonite. However, the adhesive force of the present gels did not decrease with an increase of bentonite. XRD results indicated that the exfoliation of bentonite was achieved in the xerogels and swollen gels. Finally, the drug‐release behaviors for these gels were also assessed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2934–2941, 2004     

Higher-order structures and mechanical properties of stereocomplex-type poly(lactic acid) melt spun fibers

Equimolar blend of poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) was melt spun into fibers and the relations among the processing conditions, crystalline structures, thermal properties, and mechanical properties were investigated. Drawing and annealing were performed in order to obtain fiber mainly consisting of the stereocomplex crystal phase. Fibers drawn at various temperatures exhibited either amorphous, highly oriented homo crystal, or the mixture of homo and stereocomplex with a fairly low orientation depending on the drawing temperature. Annealing of the drawn fibers at an elevated temperature higher than the melting temperature of homo crystal increased the stereocomplex content significantly. The fractions of the homo and the stereocomplex crystals strongly depended on the higher-order structure of the drawn fibers and the annealing temperature.     

Determination of swelling behavior and morphological properties of poly(acrylamide‐co‐itaconic acid) and poly(acrylic acid‐co‐itaconic acid) copolymeric hydrogels

Poly(acrylamide‐co‐itaconic acid) (PAAmIA) and poly(acrylic acid‐co‐itaconic acid) (PAAIA) copolymeric hydrogels were prepared with different compositions via free‐radical polymerization. Ethylene glycol dimethacrylate (EGDMA) was used as an original crosslinker for these monomers. Gelation percentages of the monomers were studied in detail and it was found that addition of IA into the monomer mixture decreased the gelation percentage. The variation in swelling values (%) with time, temperature, and pH was determined for all hydrogels. PAA, which is the most swollen hydrogel, has the swelling percentage value of 2000% at pH = 7.4, 37°C. Swelling behaviors were explained with detailed SEM micrographs, which show the morphologic differences between dry and swollen hydrogels. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5994–5999, 2006     

Time resolved study of oriented crystallisation of poly(lactic acid) during rapid tensile deformation

Poly(l-lactic acid) with 4% d-lactic acid comonomer has been drawn in the amorphous state at 80, 90, 100, 110 and 120 °C at an extension rate of 4 s⁻¹ while simultaneously recording WAXS and SAXS patterns at intervals of 0.12 s. At 80, 90 and 100 °C, crystallisation is very rapid (1-4 s⁻¹) and follows a first order transformation process to give highly oriented crystals. SAXS patterns were barely detectable at these temperatures despite fractional crystallinity of ∼0.2. At 110 and 120 °C, crystallisation was very slow (∼0.01 s⁻¹) and gave rise to crystals with a lower degree of orientation. After eventual crystallisation at 120 °C, a two-point SAXS pattern develops with narrow lateral spread, suggesting ‘shish kebab’ morphology. When the 80 °C drawn sample was annealed at 120 °C, a strong four point SAXS pattern develops. The change in drawing and crystallisation behaviour at higher draw temperature is attributed to the onset of chain retraction relaxation processes. The WAXS fibre pattern after annealing shows sampling on intermediate layer lines that is consistent with the α crystal form with a 10₃ helix. However, prior to annealing, sampling indicates a different, less defined helical configuration.     

Synthesis,characterization, and antitumor activity of poly(maleic anhydride‐co‐vinyl acetate‐co‐acrylic acid)

The ternary copolymerization of maleic anhydride (MA), vinyl acetate (VA), and acrylic acid (AA) [P(MA‐co‐VA‐co‐AA)], which is considered to be an acceptor–donor–acceptor system, was carried out in 1,4‐dioxane with benzoyl peroxide as an initiator at 70°C under a nitrogen atmosphere. Constants of complex formation for the monomer systems in the study were determined by UV–visible (hydrogen‐bonding complex) and ¹H‐NMR (charge transfer complex) methods, respectively. The results show that polymerization of the P(MA‐co‐VA‐co‐AA) system proceeds by an alternating terpolymerization mechanism. It is shown that the synthesized copolymers have typical polyelectrolyte behavior, ability for reversible hydrolysis–anhydrization reactions, and semicrystalline structures. In these cases, including radical polymerization, and formation of semicrystalline structures, the hydrogen‐bonding effect plays a significant role. The in vitro cytotoxicities of the synthesized terpolymer and alternating copolymer were evaluated using Raji cells (human Burkitt lymphoma cell line). The antitumor activities of prepared anion‐active copolymers were studied using methyl–thiazol–tetrazolium colorimetric assay and 50% of the cytotoxic dose of each copolymer and terpolymer were calculated. Hydrolyzed P(MA‐co‐VA‐co‐AA) and P(MA‐alt‐AA) copolymers have sufficiently high antitumor activity, which depends on the amount of hydrogen‐bonding carboxylic groups and their regular distribution in the side chain of functional macromolecules. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3425–3432, 2006