基于图像处理的片式元件缺陷检测算法

表面缺陷检测是电子元器件生产过程中的关键步骤,通过分析表面缺陷检测的现状问题,结合片式元件图像的自身特征,提出一种基于改进的自适应阈值canny算子的片式元件缺陷检测算法;该算法把片式元件灰度图像进行区域分割,得到不同值域范围内的灰度区域,利用带有敏感度的自适应双阈值canny算子进行边缘检测;算法实现结果表明,该算法能高效地检测并处理不同缺陷类型的片式元件,并且可以达到工业生产的检测速度。     

Nondestructive characterization of the mechanical strength of diffusion bonds. II. Application of a quasi-static spring model

It has been shown that the acoustic response of imperfect interfaces may be described by a quasi-static spring model. In the present paper, experimental data on the geometry of the contacts between two diffusion-bonded blocks have been used to determine the spring stiffness of such interfaces which have been correlated with experimentally determined ultrasonic reflection coefficients. The correlation between the theoretical reflection coefficient and the spring stiffness was found to be in excellent agreement with experimentally-observed values, if the disbonds are of infinitesimally small thickness. For disbonds of finite thickness, the agreement is less satisfactory. Reasons for the discrepancy in the latter case are unknown at the present time.     

The pulse distributed file system

A network of powerful personal computers, linked by a high-speed local area network, is being seen increasingly as an alternative to a traditional centralized time-sharing operating system. The PULSE project is investigating how such a system may be constructed to give the benefits of a self-sufficient personal computer to each user without losing the facilities for communication and sharing of data inherent in centralized systems. In particular, a distributed file system has been built which provides a single global UNIX

1 UNIX is a trademark of Bell Laboratories.

-like hierarchy, with a consistent appearance when accessed from any machine. Replicated copies of files are maintained to improve reliability, increase performance, and enable each machine to run stand-alone, albeit with reduced facilities.     

基于无线网络的制造业物料配送系统的设计*

针对制造业传统物料配送系统存在的缺点,基于业务流程再造的理念,运用无线局域网技术设计了全新的物料配送系统。该系统能够对配送流程进行优化,提高了配送效率,有效地解决了配送不及时所造成的生产速度瓶颈问题。     

不同活化剂对石油焦基活性炭孔结构的影响

以石油焦为原料 ,Na OH,KOH和 Na2 CO3 为活化剂制备活性炭 ,采用氮气吸附考察了不同活化剂对活性炭的比表面积、中孔和微孔孔径分布、孔容积及平均孔径等孔结构的影响 .结果表明 :KOH活化制备的活性炭包含 1 nm的微孔和 4nm的中孔 ,总孔容 0 .648cm3 /g,比表面积大 ;Na OH制备的活性炭以 1 nm的微孔为主 ,占总孔容 ( 0 .1 65 cm3 /g)的 98% ,平均孔径 1 .83nm;Na2 CO3 制备的活性炭以 4nm的中孔为主 ,占总孔容 ( 0 .1 43cm3 /g)的 68.5 % ,平均孔径 3.42 nm,比表面积小 .3种样品的孔径都呈现出多峰分布特征 .KOH和 Na2 CO3 活化制备的活性炭的 N2 吸附脱附曲线属于 型 ,Na OH活化制备的活性炭吸附脱附曲线属于 型 .     

Surface Areas of Nitrated Hydrotalcites

Hydrotalcites in the nitrate form were prepared using microwave irradiation in the hydrotreatment step. The surface area (BET) of nitrated hydrotalcites was evaluated. Solids were characterized by atomic absorption, X-ray diffraction and BET analysis. Thermal pretreatment temperature determined the surface area of the hydrotalcites.     

Carbon Aerogels as Electrode Material in Supercapacitors

Due to their large specific surface area and their high electrical conductivity carbon aerogels are promising materials for electrodes in electrochemical double-layer capacitors (supercapacitor). The carbon aerogels were made via pyrolysis of resorcinol formaldehyde aerogels. The latter were prepared by supercritical and subcritical drying as well. The important findings of our investigation were, that the highest capacities of 46 F/cm³ were measured for samples with a density of about 800 kg/m³ pyrolyzed at 800°C. Also it was shown that RF-gels with molar resorcinol/catalyst ratios 1000 or higher can be dried subcritically without cracking or significant shrinkage. Carbon aerogels derived from these RF-aerogels have a small mesopore surface area, however an especially large micropore area. They provide electrical capacities which are most suitable for their use in supercapacitors.     

Epileptic seizure classification in EEG signals using second-order difference plot of intrinsic mode functions

Epilepsy is a neurological disorder which is characterized by transient and unexpected electrical disturbance of the brain. The electroencephalogram (EEG) is a commonly used signal for detection of epileptic seizures. This paper presents a new method for classification of ictal and seizure-free EEG signals. The proposed method is based on the empirical mode decomposition (EMD) and the second-order difference plot (SODP). The EMD method decomposes an EEG signal into a set of symmetric and band-limited signals termed as intrinsic mode functions (IMFs). The SODP of IMFs provides elliptical structure. The 95% confidence ellipse area measured from the SODP of IMFs has been used as a feature in order to discriminate seizure-free EEG signals from the epileptic seizure EEG signals. The feature space obtained from the ellipse area parameters of two IMFs has been used for classification of ictal and seizure-free EEG signals using the artificial neural network (ANN) classifier. It has been shown that the feature space formed using ellipse area parameters of first and second IMFs has given good classification performance. Experimental results on EEG database available by the University of Bonn, Germany, are included to illustrate the effectiveness of the proposed method.     

无线体域网技术研究现状与展望

无线体域网(WBAN)技术是当前重要的研究热点,可以应用于医院内患者实时监测和家庭健康护理领域,具有广泛的应用前景和巨大的市场潜力。WBAN对设备的可穿戴性和数据传输的可靠性、安全性提出了更高的要求,技术发展中存在一些需要深入研究和解决的问题。对WBAN关键技术的研究现状和产业化进展进行了综述,并对WBAN技术的未来研究和发展前景进行了展望。     

PVA基活性碳纤维的研制

探索了由民用大丝束聚乙烯醇纤维(PVAF)试制活性碳纤维(ACF)的可能性,以开辟新的原料路线,降低产品成本。PVAF首先用脱水剂处理,脱水剂浓度为10%(质量),然后在200—300℃进行热处理,处理后的纤维再经预氧化和碳化活化转化为ACF,ACF的收率为37.7%,比表面积为1050m~2/g。此外,还探索了用O_3处理PVAF。用差热、热失重和红外等手段对产物进行了表征,推论了相应的反应机理。结果表明:经适当处理的PVAF可制得具有较好吸附性能的ACF。