Viscosity and Density at High Pressures in an Associative Ternary

The dynamic viscosity and the density of the associative ternary mixture water+diacetone alcohol+2-propanol have been measured as a function of temperature T (303.15, 323.15, and 343.15 K) and pressure P (100 MPa). The experimental results correspond to 698 values of and . With reference to the 54 values previously published on pure substances and 486 values for three corresponding binaries, the system is globally described by 1188 experimental values for various values of P, T and composition. The results for are discussed in terms of excess activation energy of viscous flow.     

Phase separation in segmented polyurethanes derived from mixtures of polyether polyols with different functionality

A series of segmented polyurethanes containing 60 wt° of hard segments (HS) was prepared from MDI (4,4-diphenylmethane diisocyanate) ethylene glycol and mixtures of a polyoxyethylene end-capped polyoxypropylene triol and a polyoxyethylene end-capped polyoxypropylene diol. The effects of the content of polyether diol in polyether polyols on phase separation and properties was investigated by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC) and investigation of tensile properties. The DSC and DMA results indicate that the polyurethane derived from only polyether triol exhibits obvious phase separation and that the HS is immiscible with the SS, but that the HS is compatible with the HS for the polyurethane derived from polyether diol. As the content of polyether diol increases, the compatibility between HS and SS increases. As the content of polyether diol increases, the tensile strength. elongation. toughness and tear resistance of the polyurethanes increases. but their moduli decrease. The modulus-temperature dependence in the temperature region of –30 to 65 °C increases as the polyether diol content increases.     

Remote sensing of structural complexity indices for habitat and species distribution modeling

Spatial distribution models are increasingly used in ecological studies, but are limited by the poor accuracy of remote sensing (RS) for mapping microhabitat (< 0.1 ha) features. Mapping accuracy can be improved by combining advanced RS image-processing techniques with microhabitat data expressed as a structural complexity index (SCI). To test this idea, we used principal components analysis (PCA) and an additive SCI method developed for forest ecology (calculated by re-scaling and summing representative structural variables) to summarize 13 microhabitat-scale (0.04 ha) vegetation structure attributes describing the rare mountain bongo antelope's (Tragelaphus eurycerus isaaci) habitat in Kenya's Aberdare mountains. Microhabitat data were collected in 127 plots: 37 related to bongo habitat use, 90 from 1 km-spaced grid points representing overall habitat availability and bongo non-presence. We then assessed each SCI's effectiveness for discerning microhabitat variability and bongo habitat selection, using Wilcoxon Rank Sum tests for differences in mean SCI scores among plots divided into 4 vegetation classes, and the Area Under the Curve (AUC) of receiver operating characteristics from logistic regressions. We also examined the accuracy of predicted SCI scores resulting from regression models based on variables derived from a) ASTER imagery processed with spectral mixture and texture analysis, b) an SRTM DEM and c) rainfall data, using the 90 grid plots for model training and the bongo plots as an independent test dataset. Of the five SCIs derived, two performed best: the PCA-derived Canopy Structure Index (CSI) and an additive index summarizing 8 structural variables (AI₈). CSI and AI₈ showed significant differences between 5 of 6 vegetation class pairs, strong abilities to distinguish bongo-selected from available habitat (AUCs = 0.71 (CSI); 0.70 (AI₈)), and predicted scores 60-110% more accurate than reported by other studies using RS to quantify individual microhabitat structural attributes (CSI model R² = 0.51, RMSE = 0.19 (training) and 0.21 (test); AI₈ model R² = 0.46, RMSE = 0.17 (training) and 0.19 (test)). Repeating the Wilcoxon tests and logistic regressions with RS-predicted SCI values showed that AI₈ most effectively preserved the patterns found with the observed SCIs. These results demonstrate that SCIs effectively characterize microhabitat structure and selection, and boost microhabitat mapping accuracy when combined with enhanced RS image-processing techniques. This approach can improve distribution models and broaden their applicability, makes RS more relevant to applied ecology, and shows that processing field data to be more compatible with RS can improve RS-based habitat mapping accuracy.     

基于GMM的多工况过程监测方法

传统基于主元分析的故障检测方法大多假设工业过程只运行在1个稳定工况,数据服从单一的高斯分布。若这些方法直接用于多工况过程则将会产生大量的误检。为此,本文提出了1种基于高斯混合模型的多工况过程监测方法。首先利用PCA变换对过程数据集进行降维,在主元空间建立高斯混合模型对过程数据进行聚类,自动获取工况数和相关分布特性。然后对每个工况建立主元分析(principal component analysis,PCA)模型来描述整个运行过程数据分布的统计特性。最后在过程监测中,根据监测样本属于各个工况的概率构造综合统计量,实现对多工况过程的故障检测。TE过程的仿真结果表明,本文提出的方法与传统的PCA方法相比,能自动获取工况和精确估计各个工况的统计特性,从而能更准确及时地检测出多工况过程的各种故障。     

Pattern recognition of manufacturing process signals using Gaussian mixture models-based recognition systems

Unnatural patterns exhibited in manufacturing processes can be associated with certain assignable causes for process variation. Hence, accurate identification of various process patterns (PPs) can significantly narrow down the scope of possible causes that must be investigated, and speed up the troubleshooting process. This paper proposes a Gaussian mixture models (GMM)-based PP recognition (PPR) model, which employs a collection of several GMMs trained for PPR. By using statistical features and wavelet energy features as the input features, the proposed PPR model provides more simple training procedure and better generalization performance than using single recognizer, and hence is easier to be used by quality engineers and operators. Furthermore, the proposed model is capable of adapting novel PPs through using a dynamic modeling scheme. The simulation results indicate that the GMM-based PPR model shows good detection and recognition of current PPs and adapts further novel PPs effectively. Analysis from this study provides guidelines in developing GMM – based SPC recognition systems.     

用于多个机动目标的混合高斯概率假设密度跟踪器

现有的混合高斯概率假设密度（GM—PHD）跟踪器不仅可以估计时变的多目标状态,还能辨识不同目标并保持其轨迹连续性．但当多个目标发生机动时,其稳定性较差,容易丢失目标．针对这一问题,本文提出一种能跟踪多个机动目标的混合高斯概率假设密度跟踪器算法．算法在GM—PHD滤波的框架上采用修正的输入估计方法将目标的概率假设密度（PHD）表示成混合高斯形式,并利用不同的标记辨识各个高斯分量,然后通过PHD滤波方程迭代这些高斯分量和对应的标记,最终达到跟踪多个机动目标的目的．仿真实验表明,和传统的GM—PHD跟踪器相比．新算法能以更高的稳定性跟踪多个机动目标．     

Text line and word segmentation of handwritten documents

In this paper, we present a segmentation methodology of handwritten documents in their distinct entities, namely, text lines and words. Text line segmentation is achieved by applying Hough transform on a subset of the document image connected components. A post-processing step includes the correction of possible false alarms, the detection of text lines that Hough transform failed to create and finally the efficient separation of vertically connected characters using a novel method based on skeletonization. Word segmentation is addressed as a two class problem. The distances between adjacent overlapped components in a text line are calculated using the combination of two distance metrics and each of them is categorized either as an inter- or an intra-word distance in a Gaussian mixture modeling framework. The performance of the proposed methodology is based on a consistent and concrete evaluation methodology that uses suitable performance measures in order to compare the text line segmentation and word segmentation results against the corresponding ground truth annotation. The efficiency of the proposed methodology is demonstrated by experimentation conducted on two different datasets: (a) on the test set of the ICDAR2007 handwriting segmentation competition and (b) on a set of historical handwritten documents.     

Discrete data clustering using finite mixture models

Finite mixture models have been applied for different computer vision, image processing and pattern recognition tasks. The majority of the work done concerning finite mixture models has focused on mixtures for continuous data. However, many applications involve and generate discrete data for which discrete mixtures are better suited. In this paper, we investigate the problem of discrete data modeling using finite mixture models. We propose a novel, well motivated mixture that we call the multinomial generalized Dirichlet mixture. The novel model is compared with other discrete mixtures. We designed experiments involving spatial color image databases modeling and summarization, and text classification to show the robustness, flexibility and merits of our approach.     

A new feature selection method for Gaussian mixture clustering

With the wide applications of Gaussian mixture clustering, e.g., in semantic video classification [H. Luo, J. Fan, J. Xiao, X. Zhu, Semantic principal video shot classification via mixture Gaussian, in: Proceedings of the 2003 International Conference on Multimedia and Expo, vol. 2, 2003, pp. 189-192], it is a nontrivial task to select the useful features in Gaussian mixture clustering without class labels. This paper, therefore, proposes a new feature selection method, through which not only the most relevant features are identified, but the redundant features are also eliminated so that the smallest relevant feature subset can be found. We integrate this method with our recently proposed Gaussian mixture clustering approach, namely rival penalized expectation-maximization (RPEM) algorithm [Y.M. Cheung, A rival penalized EM algorithm towards maximizing weighted likelihood for density mixture clustering with automatic model selection, in: Proceedings of the 17th International Conference on Pattern Recognition, 2004, pp. 633-636; Y.M. Cheung, Maximum weighted likelihood via rival penalized EM for density mixture clustering with automatic model selection, IEEE Trans. Knowl. Data Eng. 17(6) (2005) 750-761], which is able to determine the number of components (i.e., the model order selection) in a Gaussian mixture automatically. Subsequently, the data clustering, model selection, and the feature selection are all performed in a single learning process. Experimental results have shown the efficacy of the proposed approach.     

On the use of small training sets for neural network-based characterization of mixed pixels in remotely sensed hyperspectral images

In this work, neural network-based models involved in hyperspectral image spectra separation are considered. Focus is on how to select the most highly informative samples for effectively training the neural architecture. This issue is addressed here by several new algorithms for intelligent selection of training samples: (1) a border-training algorithm (BTA) which selects training samples located in the vicinity of the hyperplanes that can optimally separate the classes; (2) a mixed-signature algorithm (MSA) which selects the most spectrally mixed pixels in the hyperspectral data as training samples; and (3) a morphological-erosion algorithm (MEA) which incorporates spatial information (via mathematical morphology concepts) to select spectrally mixed training samples located in spatially homogeneous regions. These algorithms, along with other standard techniques based on orthogonal projections and a simple Maximin-distance algorithm, are used to train a multi-layer perceptron (MLP), selected in this work as a representative neural architecture for spectral mixture analysis. Experimental results are provided using both a database of nonlinear mixed spectra with absolute ground truth and a set of real hyperspectral images, collected at different altitudes by the digital airborne imaging spectrometer (DAIS 7915) and reflective optics system imaging spectrometer (ROSIS) operating simultaneously at multiple spatial resolutions.