煤化工专用黑水阀阀座流通性能研究

介绍了一种煤化工专用黑水阀的结构构成,并提出进行该型号阀门流通性能研究的重要性。建立流道三维模型,应用CFD有限元分析软件,模拟黑水阀内部流场分布情况,分析可视化结果,确定阀座/阀芯易损位置。分别对不同阀座渐扩角时模型进行仿真模拟,得到阀门进、出口压力值,并依此计算Cv值大小,拟合流量系数曲线,提出阀门在实现最大介质流通时阀座渐扩角范围,为阀门设计提供重要的理论参考。     

Adsorption isotherms of sesame oil in a concentrated miscella system

The adsorption of peroxides, unsaturated carbonyls, free fatty acids and carotenoids from unrefined sesame oil on vegetable carbon (5%, w/w) in a miscella system was studied. Three different solvent conditions (hexane/ethanol, 100:0, 95:5 and 75:25, vol/vol), combined in a factorial design with five levels of solvent (0, 10, 20, 30 and 40%, w/w), were used to develop the miscella. Equilibrium adsorption was not achieved during the 100 min of adsorption, mainly because the oil components were involved in oxidation reactions during the adsorption process. However, for a given solvent concentration, adsorption of the oil components showed a significant linear regression on their respective initial concentration in the miscella (C_i). Peroxides and carbonyls showed, at all solvent levels investigated, an affinity for the carbon more independent of their C_i than free fatty acids and carotenoids. In general, at the same C_i, a higher adsorption was achieved as solvent concentration increased. The results indicated that free fatty acid adsorption may depend on competitive adsorption based on molecule hydrophobicity. However, in spite of the higher hydrophobicity of carotenoids, compared with free fatty acids, they might not be competing for the same adsorbing sites. Ethanol showed a prooxidant effect that increased peroxide production during adsorption but did not affect the reaction involved in carbonyl production.     

混合物MH-81状态方程的研究——从无限稀释活度系数预测混合物汽液平衡

本文由无限稀释活度系数求取混合物MH-81状态方程的二元相互作用参数,预测了二元混合物的汽液平衡,获得了较满意的结果。     

自适应收扩系数的双中心协作QPSO算法

针对量子粒子群优化(QPSO)算法迭代后期种群多样性下降、收敛速度慢、易陷入局部最优的缺点,提出一种自适应收缩-扩张系数的双中心协作最子粒子群优化算法。该算法从2个方面进行改进:(1)自适应调节收缩-扩张系数,其目的是帮助粒子跳出局部最优点,提高粒子的全局搜索能力;(2)双重更新全局最优位置,即在每次迭代中,先后分别采用2种不同的方式更新全局最优位置。第1种方式与QPSO算法一致,第2种方式则引入双中心粒子,使其和当前全局最优位置在相应维度上合作,从而达到更新全局最优位置的目的。从固定迭代次数和固定精度角度分析算法性能,仿真结果表明,相比于QPSO算法,该算法在保证复杂度较低的情况下,可提高收敛速度,增强全局和局部搜索能力。     

Prediction of liquid film mass transfer coefficients in packed columns using liquid holdup

A unique characteristic linear dimension (d), defined as the cube root of the specific liquid holdup (h_sp) in the packed column, was used to correlate successfully the liquid film mass transfer coefficient k_La for gas absorption-desorption for sparingly soluble gases in liquids below loading. To produce this simple, dimensionless correlation, k_La data reported in literature were used, covering a wide range of physical properties of liquids, packings and operating conditions. This new approach showed operating holdup as an important factor in gas liquid mass transfer.     

Small-angle neutron scattering from branched epoxide resins

Small-angle neutron scattering experiments in the range of q² from 0.01 to 25 nm⁻² have been carried out on branched epoxide resins based on bisphenol-A at the Institute Laue—Langevin (I.L.L) in Grenoble (q=(4π/λ) sin(θ/2)). Measurements were made with six samples in the range of M_W from 1500 to 19 000 and four concentrations between 1.3 and 10% (w/w) in deuterated diglyme. The results are as follows: (i) The mean square radius of gyration follows a relationship S²_z=4.69×10⁻⁴M^1.20_W (nm²). (ii) In all cases fairly large second virial coefficients A₂ are obtained which, however, decrease strongly with molecular weight. Above M_W=2500, the virial coefficient follows the relationship A₂=1.6M^−0.85_W (mol cm³g⁻²). (ii) The reciprocal particle scattering factor as a function of q² exhibits only a slight upturn and otherwise shows the behaviour of a randomly branched polycondensate. The slight upturn is discussed as being caused by the finite volume of the monomeric unit. Possible reasons for the high exponent in the S²_z versus M_W dependence are briefly discussed.     

一种公交网络最优路径新算法*

从出行者的实际情况出发,提出步行愿望系数,综合考虑最小换乘次数、最短时间以及最小费用等因素,提出了一种公交网络最优路径新算法,应用于广州市大学城内公交线路查询,实现相应的仿真系统。     

Deformation and failure study of surrounding rocks of dynamic pressure roadways in deep mines

In order to understand the change rules of stress-displacement in surrounding rocks of dynamic pressure roadways in deep mines and to obtain a theoretical basis for analyses of roadway stability and designs of support,we established a coupling equation of adjacent rock strength,mining stress and supporting resistance on the basis of an elastic-plastic theory of mechanics.We obtained an analytical solution for stress and displacement distribution of elastic and plastic regions in surrounding rock of dynamic pressure roadway..Based on this theory,we have analyzed the changes in stress-displacement in elastic and plastic regions of surrounding rocks of dynamic pressure roadways in the Haizi Coal Mine.The results show that:1) radial and tangential stress change violently within the first 4 m from the inner surface of a roadway after excavation;radial stress increases while tangential stress decreases within a range of about 6 m from the inner surface of the roadway as a function of q3;2) radial and tangential stress increase with an increase in the mining pressure coefficient k;the increase in the rate of tangential stress is greater than that of radial stress;3) the radial displacement of the inner surface of roadways decreases with an increase in q3,provided that k remains unchanged.     

Investigation on film cooling characteristics from a row of converging slot-holes on flat plate

Experimental and numerical researches were conducted to investigate the cooling performance of a single row of consoles (converging slot-hole) on a large-scale flat-plate model. The results show that the coolant flow from a row of consoles shows good lateral uniformity of adiabatic effectiveness, with regions of slightly enhanced cooling occurring between the consoles. For the console cooling geometry, the interaction between coolant jet from inclined console and the mainstream flow results in reasonable vo...