A national cross-sectional study in the Danish wood and furniture industry on working postures and manual materials handling

Musculoskeletal disorders constitute a major problem in the wood and furniture industry and identification of risk factors is needed urgently. Therefore, exposures to different work tasks and variation in the job were recorded based on an observation survey in combination with an interview among 281 employees working in wood working and painting departments. A questionnaire survey confirmed high frequencies of symptoms from the musculoskeletal system: The one-year prevalence of symptoms from the low back was 42% and symptoms from the neck/shoulder was 40%. The exposure was evaluated based on: (1) classification of work tasks, (2) work cycle time, (3) manual materials handling, (4) working postures, and (5) variation in die job. Among the employees 47% performed feeding or clearing of machines, 35% performed wood working or painting materials, and 18% performed various other operations. Among the employees 20% had no variation in their job while 44% had little variation. Manual materials handling of 375 different burdens was observed, which most often occurred during feeding or clearing of machines. The weight of burdens lifted was 0·5-87·0 kg, where 2% had a weight of more than 50 kg. Among the lifting conditions 30% were evaluated as implying a risk of injury. An additional risk factor was the high total tonnage lifted per day, which was estimated to range from 132 kg to 58 800 kg. Working postures implied a risk of injury due to prolonged forward and lateral flexions of the neck, which was seen most frequently during wood working or painting materials. These data substantiate the finding that work tasks mainly during feeding or clearing of machines imply a risk of injury to the low back and a risk of injury to the neck and shoulder area mainly during wood working or painting materials. Optimal strategies for job redesign may be worked out by using these data in order to prevent occupational musculoskeletal disorders.     

The influence of low frequency vibration on pilot performance (as measured in a fixed base simulator)

This report describes a study on the effects of low frequency vibration on pilot performance. Army pilots acted as subjects and flew simulated helicopter missions in a realistic fixed base simulator environment. While flying the two-hour missions pilots were exposed to vibration stimuli varying in frequency from 6 to 12 Hz and in amplitude from ±0·1 to ±0·3g (measured at the floor). Measurements were taken of the vibration tramsmissibility of the pilot's seat so that the vibration actually felt by the subject could be determined.

Missions involved transporting external loads in a simulated logistics environment. Performance was evaluated by measuring flight path deviations from prescribed en route, approach, and hover parameters.

The vibration stimuli used did not degrade performance. In fact, performance tended to improve with increased stress. It is hypothesized that this trend was due to motivation, i.e. as subjects felt the onset of fatigue they compensated by working harder and thus tended to improve their performance.

On about 6% of their scores pilots exhibited sudden lapses in their ability to respond to display indications. This resulted in poor scores in the midst of otherwise normal data. These lapses are probably of very short duration (seconds in length) and seem to occur randomly. This same effect was also observed in a previous study by the author. It may be possible that lapses of this type are related to so called ‘pilot error’ accidents. Further research is needed to verify this.     

Parallelizable restarted iterative methods for nonsymmetric linear systems. part I: Theory

Large sparse nonsymmetric problems of the form A u = b are frequently solved using restarted conjugate gradient-type algorithms such as the popular GCR and GMRES algorithms. In this study we define a new class of algorithms which generate the same iterates as the standard GMRES algorithm but require as little as half of the computational expense. This performance improvement is obtained by using short economical three-term recurrences to replace the long recurrence used by GMRES. The new algorithms are shown to have good numerical properties in typical cases, and the new algorithms may be easily modified to be as numerically safe as standard GMRES. Numerical experiments with these algorithms are given in Part II, in which we demonstrate the improved performance of the new schemes on different computer architectures.     

The numerov alternating group explicit (numage) method:

In this paper, more accurate solutions are obtained by applying the Numerov formula to the Alternating Group Explicit (AGE) method in the solution of linear and non-linear two point boundary value problems.     

Prüfer method for periodic and semi-periodic sturm-liouville eigenvalue problems ∗

In reference [19], the authors developed a shooting algorithm for Sturm-Liouville eigenvalue problems associated with periodic and semi-periodic boundary conditions. The technique is based on the application of the Floquet theory, and it has proven to be efficient for computing eigenvalues. However, the performance of this technique depends upon the choice of the starting eigenvalues. In the present paper, we continue our study and employ the Prüfer method. An attractive property of this method is that eigenvalues can usually be accurately computed even when no information on the eigenvalue distribution is provided. Sufficient conditions for convergence, error bounds and a procedure to improve the stability are discussed. Some numerical examples are given to illustrate the effectiveness of the proposed method.     

Optimal design of butterfly-shaped linear ultrasonic motor using finite element method and response surface methodology

A new method for optimizing a butterfly-shaped linear ultrasonic motor was proposed to maximize its mechanical output. The finite element analysis technology and response surface methodology were combined together to realize the optimal design of the butterfly-shaped linear ultrasonic motor. First, the operation principle of the motor was introduced. Second, the finite element parameterized model of the stator of the motor was built using ANSYS parametric design language and some structure parameters of the stator were selected as design variables. Third, the sample points were selected in design variable space using latin hypercube Design. Through modal analysis and harmonic response analysis of the stator based on these sample points, the target responses were obtained. These sample points and response values were combined together to build a response surface model. Finally, the simplex method was used to find the optimal solution. The experimental results showed that many aspects of the design requirements of the butterfly-shaped linear ultrasonic motor have been fulfilled. The prototype motor fabricated based on the optimal design result exhibited considerably high dynamic performance, such as no-load speed of 873 mm/s, maximal thrust of 27.5 N, maximal efficiency of 43%, and thrust-weight ratio of 45.8.