一体化复合式膜生物反应器除磷研究

本文通过对比实验，研究了不同工艺组合条件下一体化复合式膜生物反应器（HCMBR）的除磷效果，研究表明，在无厌氧段的情况下，反应器内保持好氧状态的同时，填料内部存在厌氧环境，TP的去除率为22％，在有厌氧段（A／O）的情况下，TP的去除率可达70％，采用化学方法时，TP去除率可达82．1％，但过高的n(Al^3 )/n(TP)值将会影响污泥的活性，并且HCMBR对NH3－N，CODCr,TN等污染物有十分良好的去除效果。     

Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

溶液缩聚物分子量分布及其控制的研究

本文根据溶液缩聚基本原理及反应过程的基本事实，用随机过程方法，得到缩聚产物分子量分布函数，并对分子量及其分布的控制作了讨论。     

充油S-SBR加工行为的研究

在中试装置上合成相对分子质量分布较宽的充油S-SBR，考察不同环烷油和芳烃油填充量的充油S-SBR的流变性能和混炼行为。结果表明，增大油的填充量能提高充油S-SBR的流动性能，充芳烃油S-SBR相对于充环烷油的S-SBR对温度更敏感，宽相对分子质量分布的充环烷油S-SBR的混炼性能优于S-SBR1204及E-SBRl778，竟相对分子质量分布的充芳烃油S-SBR的混炼性能优于S-SBR1204，Solprene380和E-SBR1712。     

淮河流域水资源短缺风险评估与时空分析

根据2003-2013年淮河流域五省的降水量、径流系数、人均水资源量、人均GDP、人口密度等相关数据,构建水资源短缺风险评价体系,用熵权法对指标赋值,运用可变模糊模型对淮河流域及各省的水资源短缺风险进行评估和时空差异分析。结果表明:2003-2013年间淮河流域水资源短缺风险值总体较高,且呈缓慢的增长趋势,2004年降水较少,风险值达到最高;十年间河南省风险增加最为明显,而山东省较为稳定,风险增加也最低;在淮河流域五个区域中,河南省的风险程度最高,达到3.52;江苏省、山东省次之;安徽省和湖北省相对较低,达到2.86和2.51。水资源短缺风险二级指标分析发现,危险性最强的是河南省,安徽省最小;水资源短缺易损性最强的是山东省,湖北省最小;水资源短缺暴露性最强的是江苏省,山东省最小;水资源短缺可恢复性最好的是湖北省,河南省最差。同时,所有评价指标中人口密度、人均GDP、降水量对水资源短缺风险的影响较大。     

应用质谱扫描测定胸腺肽相对分子质量

目的 精确测定胸腺肽相对分子质量分布。方法 采用质谱扫描法。结果 3批胸腺肽相对分子质量均在2000～4000,无10 000以上的大分子蛋白。结论 本方法灵敏度高,可直观地测定胸腺肽相对分子质量分布状况,为控制胸腺肽质量提供了新的检测方法。     

甲基异柳磷混配拌种防治大豆病虫害的试验研究

１９９４－１９９５年通过室内盆栽和田间试验示范结果表明，应用甲基异柳磷与多菌灵和硼钼微肥混配拦种，对大豆安全无害，对大事产根潜蝇，根腐病和大豆胞囊线虫病防效分别为９３．１％，６４．９％和６７．６，比不处理对照增产１２．０－３０．３％。     

Oxidative stability of high-fatty acid rice bran oil at different stages of refining

The contents of natural antioxidants and the oxidative stability of rice bran oils at different refining steps were determined. Tocopherols and oryzanols were constant in crude and degummed oils but decreased in alkali-refined, bleached and deodorized oils. The process of degumming, alkali-refining, bleaching and deodorization removed 34% of the tocopherols and 51% of the oryzanols. During storage of deodorized oil for 7 wk, 34% of the tocopherols and 19% of the oryzanols were lost. The maximum weight gain, peroxide value and anisidine value were obtained from alkali-refined oil during storage. The order of oxidation stability was crude ≥ degummed > bleached = deodorized > alkali-refined oil.     

Mechanical behaviour of a combined joint composed of mechanical fastening and adhesive bonding

A study has been made of ‘combined’ joints consisting of mechanical fastening and adhesive bonding between rigid adherends. The mechanical characteristics of such ‘hybrid’ butt and lap shear joints have been derived by theoretical analysis. Results from experimental tests in combined joints giver reasonable agreement with the theoretical equations relating joint load to deformation.     

High molecular weight polypropylene nanospheres: Synthesis and characterization

The high molecular weight (MW) polypropylene with average particle size of 60 nm was synthesized by controlled growth mechanism using Ziegler–Natta catalyst. The atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) studies showed that PP nanoparticles were spherical in shape. Structure and crystallinity were concomitantly studied through Fourier transform infrared spectroscopy and X‐ray diffraction, respectively. It shows nanospherical PP particles with more crystallinity (～ 75%) compared with macrosized PP (～ 59%). In addition, differential scanning calorimetry studies revealed the finite particle size effect on T_g and the scale dependence T_g followed a first order exponential trend. As particle size goes down to nano‐ scale from macrosize, continuous elevation of T_g's were observed from ?25 to ?11°C. This phenomenon was directed to configuration entropy of single spherical nanoparticles of PP. The mechanical properties and surface roughness were also evaluated through AFM. At last, the properties of nanosized PP were compared with micron and macrosized particles. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007