Investigation into the morphological and mechanical properties of date palm fiber-reinforced epoxy structural composites

This study aims to examine the morphology and mechanical properties (tensile, flexural, and compressive) of epoxy composites reinforced with epoxy date palm leaves (EDPL), epoxy date palm branch (EDPB), and epoxy/hardener date palm core shell (EDPC) fibers (particle size <1 μm depend on the date palm fibers). A three-step technique was used to obtain the composites. The EDPL composites showed a maximum tensile strength of 3.45 MPa, while the EDPB composites showed maximum compressive and flexural rigidity of 9.46 and 5.55 MPa, respectively, owing to the good compatibility of fiber-matrix bonding. In this work, epoxy composites reinforced with date palm fibers (DPF) leaves, branches, and core shell were recycled using a cost-effective and easily reproducible three-step technique. EDPC fibers fabricated with 64.65% weight carbon fibers content demonstrated improved tensile strengths and stiffness properties. The three samples of palm date composites revealed mechanical properties that could be used to trial these fibers for manufacturing purposes, and to exploit their extraordinary mechanical properties shown in current results.     

Study on diffusion welding SiCp/ZL101 with Cu interlayer

Through the vacuum diffusion welding SiCp/ZL101 aluminum with Cu interlayer,the effect of welding parame-ter and the thickness of Cu on the welded joint property was investigated,and the optimal welding parameters were putforward at the same time.The microstructure of joint was analyzed by means of optical-microscope,scanning electron mi-croscope in order to study the relationship between the macro-properties of joint and the microstructure.The results showthat diffusion welding with Cu interlayer could be used for welding aluminum matrix composites SiCp/ZL101 successfully.     

高铬铸铁-碳钢复合板水平浇注铸造工艺

研究了厚度为40 mm高铬铸铁-碳钢复合板水平浇注铸造工艺,并对二者复合强度进行了检测.结果表明:当先浇注的定量高铬铸铁冷却到1080～1220℃时在其上再浇注碳钢均可获得牢靠的复合铸件.     

Hopen机顶盒软件平台设计与实现*

针对IBM STBX25XX机顶盒的硬件结构特点,设计了Hopen机顶盒软件平台.通过对Hopen嵌入式实时操作系统内核的移植、各功能部件驱动的定制和开发,使得Hopen机顶盒软件平台可以运行在PowerPC架构的硬件上,完成了数字电视节目的播放功能,从而拓宽了Hopen的应用领域.     

Design,Synthesis and Biological Evaluation of Steroidal Glycoconjugates as Potential Antiproliferative Agents

To systematically evaluate the impact of neoglycosylation upon the anticancer activities and selectivity of steroids, four series of neoglycosides of diosgenin, pregnenolone, dehydroepiandrosterone and estrone were designed and synthesized according to the neoglycosylation approach. The structures of all the products were elucidated by NMR analysis, and the stereochemistry of C20-MeON-pregnenolone was confirmed by crystal X-ray diffraction. The compounds′ cytotoxicity on five human cancer cell lines was evaluated using a Cell Counting Kit-8 assay, and structure–activity relationships (SAR) are discussed. 2-deoxy-d -glucoside 5 k displayed the most potent antiproliferative activities against HepG2 cells with an IC₅₀ value of 1.5 μM. Further pharmacological experiments on compound 5 k on HepG2 cells revealed that it could cause morphological changes and cell-cycle arrest at the G0/G1 phase and then induced the apoptosis, which might be associated with the enhanced expression of high-mobility group Box 1 (HMGB1). Taken together, these findings prove that the neoglycosylation of steroids could be a promising strategy for the discovery of potential antiproliferative agents.     

以CoMn2O4为催化剂氧化二甲苯的研究

探索催化剂的制备条件,包括搅拌温度、干燥温度、煅烧温度及煅烧时间对二甲苯氧化效果的影响,结果表明煅烧温度对氧化效果的影响最为明显。在其它制备条件（搅拌温度为60 ℃、干燥温度为60 ℃和煅烧时间为3 h）不变的前提下,通过改变煅烧温度（温度分别350、450和550 ℃）,比较3种二甲苯氧化难易以及不同煅烧温度下氧化同一构型二甲苯的差异。整体而言,煅烧温度为350 ℃的催化剂性能最佳。邻、间和对3种二甲苯完全氧化的温度相差约15 ℃,其中,邻二甲苯最难氧化,完全氧化需260 ℃,间二甲苯次之,对二甲苯最易氧化。与此同时,利用XRD、XPS、N₂吸附-脱附和H₂-TPR等表征手段来分析煅烧温度造成3种不同构型二甲苯氧化程度差异性的原因。     

Biowaste-derived hydroxyapatite reinforced with polyvinyl pyrrolidone/aloevera composite for biomedical applications

The present investigation focuses on the synthesis of crabshell-derived hydroxyapatite (CS-HAP)/ water-soluble synthetic polymer—polyvinylpyrrolidone(PVP)/aloevera(AV)—a natural biopolymer, as a composite for enhanced mechanical, antibacterial and biocompatible properties. The reinforcement of polymer has a significant function in increasing the mechanical property of the composite, whereas the incorporation of AV improves the antibacterial and biocompatibility. Phase composition, morphology, mechanical property, and hydrophilicity of CS-HAP/PVP/AV biocomposite with different concentrations of PVP and AV were examined by Fourier transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), scanning electron microscopy with energy dispersive X-ray (SEM-EDX), Vickers microhardness tests, contact angle, respectively. Furthermore, the antibacterial efficiency of the composite is assessed using Escherichia coli (E coli) and Staphylococcus aureus (S aureus). The biocompatibility of HOS MG 63 cells on the CS-HAP/PVP/AV composite is evaluated by MTT assay test. The obtained results evidence that the as-synthesized composite have appropriate mechanical, antibacterial and biocompatible properties. Overall, the combination of mechanical property of PVP, antibacterial and biocompatible property of AV in CS-HAP/PVP/AV, makes the composite a potential therapeutic material for various biomedical applications.     

变形体温度场和位移场的计算

本文用热源法对简单热传导问题进行了解析解的计算，并应用PDE工具箱求解热传导偏微分方程得到数值解。通过两种温度场的计算结果求出相应的位移场结果，比较可知MATLAB中PDE工具箱对难以用解析法求解的热传导问题有一定的指导作用。     

镁合金及其复合材料超塑性的研究现状

以等通道角挤压和粉末冶金等方法为例，讨论了镁合金晶粒细化的处理工艺。在室温下晶粒细化可使镁合金同时具有较高的强度和韧性，而在较高的应变速率或较低的温度下，晶粒细化的镁合金具有一定的超塑性，这说明晶粒细化对改善镁合金的力学性能十分重要。镁合金超塑性变形的主要机制仍然是晶界滑移，但晶界滑移总会在晶界三叉区或材料增强相与基体的相界处产生应力集中，使晶界滑移受到阻碍，这就需要有另外的协调机制来协调晶界进一步滑移。镁合金在超塑性变形过程中更容易发生动态再结晶使晶粒细化，使晶界滑移能够继续进行。镁基复合材料中增强体颗粒很细小且弥散分布，稳定了镁合金在高温下的组织，颗粒与晶粒界面可以充当原子扩散通道，很好地协调了晶界滑移。     

Cu-Fe-Cr原位复合材料的纤维相结构

通过感应熔炼和冷拔变形制备了Cu 16Fe 2Cr原位复合材料 ,将铜基体选择腐蚀后提取出了纤维 ,采用SEM和TEM观察分析了纤维相结构。在较低的应变量 (η =1.6 7)时 ,纤维不均匀 ,随着变形量的增大 (η =5 .42 ) ,纤维外形变得均匀。在 η =5 .42时 ,一个显著的特点是单根Fe Cr纤维分为一些由晶界隔开的平行亚单元 (宽度约为 10 0nm) ,通过亚单元共同的 [110 ]衍射获得了晶粒之间的相对取向 ,相邻晶粒的取向角在 3°～ 15°之间。