Application of a time-dependent constitutive model to rheocast systems

A mathematical model has been developed to describe the velocity field in an agitated Al- 5Cu alloy in which B4C particles were suspended at different loading rates of up to 40 %. The material system was agitated by means of an electromagnetic rotary stirrer. The non- Newtonian behavior of the melt/solid slurry was allowed for using two models: the steady- state model of Joly and Flemings and the model of Brown, which takes account of time- dependent behavior. Calculations have shown that the two models behave similarly at high shear rates. In addition, if agitation was discontinued, very little time was required for the velocity (and hence the fluidity) of the slurry to decay.     

Ni-P-Ce合金体系复合刷镀层沉积行为研究

在Ni-P合金复合刷镀液中,添加稀土Ce3+,可以通过电刷镀沉积出Ni-P-Ce合金镀层,并可提高刷镀层的沉积速度和刷镀液稳定性;稀土化合物CeCl3·7H2O含量在35g/L左右时,刷镀的电流效率及沉积速度高;柠檬酸在Ni-P-Ce刷镀液中既可起稳定剂的作用,又可使Ce3+离子从溶液中电沉积出来。     

倾斜冷却体法制备半固态浆料的研究现状

介绍了低成本、高效率的倾斜冷却体法制备半固态浆料的方法，综述了国内外对该方法的研究现状、相关工艺参数对组织形貌的影响及需要解决的关键问题。     

铝合金变质处理的现状和发展趋势

本文主要叙述了铝合金变质处理的方法及特点,并对铝合金变质方法的发展趋势作了展望.     

合金元素对Fe_3Al和FeAl合金力学性能的影响SCIEI

本文研究了Mo,Si,B和化学计量成分对Fe_3Al和FeAl合金室温和高温拉伸性能以及组织结构的影响,结果表明,三种合金元素都使两种铁铝化物得到明显强化,但Mo和Si使其严重变脆,硼使FeAl增加塑性,断口由沿晶型变为穿晶准解理型。富Al的Fe_3Al和富Fe的FeAl合金室温塑性较化学计量化合物有明显提高。Fe_3Al从400—550℃,FeAl从400—500℃出现反常温度关系,用组织结构方面的结果对此进行了讨论。     

碳钢与不锈钢在腐蚀浆料中冲刷腐蚀交互作用的定量研究

用失重法和电化学法系统地研究了碳钢与不锈钢在腐蚀浆料中冲刷与腐蚀的交互作用及其电化学行为。试验表明：①冲刷腐蚀和动态纯腐蚀极化曲线与静态纯腐蚀极化曲线截然不同，两者的腐蚀机理存在本质的差异；②T8钢以腐蚀失重为主，18—8不锈钢以冲刷失重为主，两者的冲刷腐蚀交互作用失重率占其总失重率的60%以上，表明耐蚀不耐磨的18—8不锈钢和耐磨不耐蚀的T8钢在冲刷腐蚀工况中均难以胜任；③T8钢的冲刷腐蚀失重率和交互作用失重平均是18—8不锈钢的6倍以上，表明在液固两相流冲刷腐蚀工况中，材料必须首先具有一定的耐蚀性，然后再考虑提高材料的硬度和耐磨性，这样才能有效地提高材料的耐冲刷腐蚀性能。     

AB INITIO CALCULATION OF THE ELASTIC AND OPTICAL PROPERTIES OF Al_3Sc COMPOUND

The ab initio method has been performed to explore the elastic and optical properties of Al3Sc compound, based on a plane wave pseudopotential method. It can be seen that the calculated equilibrium lattice parameter and elastic constants are in reasonable agreement with the previous experimental data. The elastic constants satisfy the requirement for mechanical stability in the cubic structure of the Al3Sc compound. The optical property calculations show that a strong absorptive peak exists from 0-15eV and a relative small absorptive peak exists around 30eV. The form is caused by the optical transitions between high s, p, and d bands, and the latter results from the optical transitions from high s, p, and d bands to the low 2p band.     

冷镦挤复合的连接成形工艺分析及模具设计

基于镦挤连接成形的金属塑性变形规律,分析了一次连接成形件的冷镦挤复合成形的形变特点和工艺特点,进行了冷镦挤一次连接成形工艺过程的可行性分析设计和模具设计,并得到了生产实践验证。     

Fe3Al/Q235异种材料扩散焊界面相结构分析

采用X射线衍射、透射电镜和电子衍射技术对Fe3Al/Q235真空扩散焊界面附近的微观相结构进行了试验研究。试验结果表明，当加热温度1050～1080℃，保温时间60min，压力9.8MPa时，Fe3Al金属间化合物与Q235钢扩散焊界面附近形成了明显的扩散过滤区，该过渡区由Fe3Al相和a-Fe(Al）固深体构成，显微硬度约为480～540HM，不存在含铝校较高的高硬度脆性相。有利于提高Fe3Al/Q235扩散过滤区的韧性，提高扩散焊接头的抗裂纹能力。扩散过滤区中的Fe3Al相与a-Fe(Al）固溶体之间存在着（110）a-Fe(Al)//(011)Fe3Al和[001]a-Fe(Al)//[100]Fe3Al的晶体学取向关系。     

国产气相聚乙烯浆液催化剂的工业应用

本文简要阐述了北化院BCS01和上海院SLC-S两种国产气相聚乙烯浆液催化剂的性能、催化剂结构,在Unipol聚乙烯工业装置上应用结果,以及和进口同类催化剂UCAT-J的性能比较。