Bezier曲线到AH-Bezier曲线的升阶算法

关于曲线升阶,已有的结论往往限于同类曲线之间。为了突破这一限制,考虑不同类曲线间的升阶,关注代数多项式空间中的Bezier曲线到代数双曲多项式空间中的AH-Bezier曲线的升阶。研究从基函数入手,利用Bezier和AH-Bezier共有的求导降阶的特点,结合矩阵分块的思想,先给出AH-Bezier基到Bernstein基的转换矩阵,进而推出控制顶点的升阶公式,最后给出升阶算法。结果表明,任意n次Bezier曲线可以通过该算法升到n＋3阶（等同于n＋2次）的AH-Bezier曲线。算法实现了Bezier到AH-B＆#233;zier曲线模型的精确转换。     

海上一体化信息系统的体系结构研究

随着我国海军信息化建设的全面展开,海军电子信息系统一体化综合集成是必然的发展方向,从本质上而言,信息系统的灵活性、适应性、动态性、开放性需要体系结构的支持。为此,论文提出了海上一体化信息系统体系结构的总体框架,然后从体系结构的角度着重分析了服务集成、数据集成和作战业务流程管理这三个方面的关键技术和集成框架。只有深入挖掘和研究信息系统的体系结构,才能够对信息系统进行有效的配置和管理,才能够快速提升信息系统的整体作战效能。     

基于熵值模糊评判法的地域通信网脆弱性评估磁

地域通信网作为一种复杂网络系统,具有复杂性、模糊性和多变性等特性,对其脆弱性评估指标赋权时,如果主观性较强,就容易出现与实际数据不相符的现象。针对这一情况,提出将熵值模糊综合评判法应用于地域通信网脆弱性评估。依据地域通信网的实际情况,建立层次化的脆弱性指标体系,在此基础上建立模糊集合及隶属度矩阵。运用熵值法对评价指标进行赋权,依次得到各层指标模糊评价,求得评估结果的数值。该方法充分保证了评估指标权重的客观性,能够更准确、方便地描述地域通信网的脆弱性。     

人工免疫优化的汽车散热器功能设计

应用公理设计原理设计车用散热器时,耦合功能的存在是一个普遍问题。国内外学者提出使用人工免疫方法求解耦合功能集。针对这些算法在度量抗体优异性时存在的不足,提出了新的度量指标：耦合功能集聚度,并给出相应公式,同时在抗体生成算法中引入基因优选的方法。经在银轮股份进行车用机油散热器设计仿真实验,表明新的算法具有较高的效率。     

Effect of degree of polymerization on gelation and flow processability of poly(vinyl chloride)

The effect of degree of polymerization (DP) on the gelation and flow processability of poly(vinyl chloride) (PVC) was studied. Sheets with adjusted degree of gelation were prepared by rolling rigid pipe formulation suspension PVC compounds with DPs of 800, 1050 and 1300 by changing the milling temperature. Their degrees of gelation were measured with DSC and their capillary flow properties were measured with a capillary rheometer at 150, 170 and 190°C and the effect of DP on the relation between gelation and flow processabilities was studied. Because of the higher shearing heat during milling, the sample with the higher DP had a higher history temperature and thus tended to show a higher degree of gelation. The viscosity increased as the gelation increased. The dependency of viscosity on DP was higher at higher milling and extrusion temperatures and thus at a higher degree of gelation and a lower shear rate. This was assumed to be attributed to the more prominent uniform molecular flow as against the particle flow. The die swell increased with increasing the milling and extrusion temperatures and hence with increasing the gelation. A sample with a lower DP tended to show a larger die swell and this tendency was even more pronounced at the higher extrusion temperature. The melt fracture easily occurred when a sample with advanced gelation was extruded at low temperature. Whereas at low milling temperatures a sample with the lower DP showed a lower critical shear rate at onset of melt fracture, and thus easily generating melt fracture, at high milling temperatures it showed a higher critical shear rate and hence scarcely generated melt fracture. These experimental results were explained by the fact and concept that a sample with a lower DP shows a higher increase in the gelation during extrusion and/or the slighter feature of particle flow as against the uniform molecular flow at the same gelation level. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1915–1938, 2004     

煤矸石用作农肥的几个问题

通过对平顶山矿区煤矸石的微量营养元素、粒度与酸碱度及煤矸石中的有害元素的分析测定,在综合国内外煤矸石研究资料的基础上,笔者认为平顶山矿区煤矸石可用作农肥。煤矸石的这种用途不仅可获得较大的经济效益,而且还具有明显的社会效益和环境效益。     

尼龙66/乙烯-醋酸乙烯酯共聚物接枝马来酸酐共混体系的研究(Ⅰ)乙烯-醋酸乙烯酯共聚物熔融接枝马来酸酐的制备与表征

以马来酸酐为单体、过氧化物为引发剂，采用熔融挤出法制备了乙烯-醋酸乙烯酯共聚物接枝马来酸酐(EVA-g-MAH)。重点讨论了不同型号的EVA、过氧化物引发剂品种及用量、单体MAH用量和加工工艺条件等因素时接枝反应的影响。通过化学滴定法和傅立叶红外光谱法(FTlR)证实部分马来酸酐确实以化学键连接到EVA分子链上。与聚乙烯(PE)、聚丙烯(PP)相比，EVA中由于含有醋酸乙烯(VA)基团，极性较大，与MAH的相客性较好，因而在相同的条件下接枝效率也更大；而且VA含量越大，越有利于接枝反应。比较不同的过氧化物引发剂BPO和DCP。发现DCP的引发效果更好。实验结果还表明，在EVA进行接枝反应的同时存在着交联反应，引发剂DCP的用量不宜过高，为得到接枝率适中，交联度很小的接枝产物，还要选择合适的MAH与DCP的用量。     

CGA560增强助磨剂在水泥粉磨中的应用研究

研究了CGA560增强助磨剂在水泥粉磨中对台时产量和水泥质量的影响。试验结果表明:在磨机状况不改变的条件下,CGA560增强助磨剂的加入可提高磨机产量10%-30%;同时可有效减少过粉磨现象,优化水泥颗粒级配,提高了水泥粉磨细度及比表面积;因而使水泥强度等性能得到了明显改善和提高。     

基于SDN的本地综合承载传送网技术研究

该文通过对SDN本地综合承载传送网技术应用现状的分析,明确社会使用的需求,进而提出构建SDN的本地综合承载传送网技术网络架构和模型的方法,对SDN的本地综合承载传送网技术进行全面的分析。     

Influence of chitosan characteristics on coagulation and flocculation of organic suspensions

Several samples of chitosan with different degrees of deacetylation and of different molecular weights were tested for the coagulation–flocculation of organic suspensions. Organic suspensions were prepared by mixing mushroom powder with tap water. Experiments were carried out at pH 5, pH 7, and pH 9. Because decreasing the pH reduced the amount of chitosan required to reach the required turbidity, at pH 9, a high concentration of chitosan was required to achieve the required treatment levels, whereas the difference was less significant between pH 7 and pH 5 (the required concentration of chitosan was halved). Though viscosity, correlated to the molecular weight of chitosan, affected treatment performance, its influence on the efficiency of coagulation–flocculation could be substantially reduced by slightly increasing the concentration of the polymer. This is of importance in the processing of industrial effluents: the aging of a chitosan solution, which may cause partial depolymerization, and loss of viscosity, will have a limited impact on process efficiency. The degree of deacetylation also has a limited effect on treatment performance, especially when the degree of deacetylation exceeds 90%. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2070–2079, 2005