Geometry-Dependent R-Curve for Quasi-Brittle Materials

Fracture of quasi-brittle materials such as ceramics and cement-based materials can be described by an R -curve, defined as fracture resistance. The R -curve can be constructed as the envelope of the strain energy release rates ( G ). In this study, R -curve is defined as an envelope of G -curves obtained by varying the dimensions of identical specimens, while keeping the geometry and the initial flaw size constant. By approximating the G -curve with a second-order function of the crack length, a simple formulation of the R -curve is derived by solving a differential equation. Three parameters are needed for the proposed R -curve. These parameters can be obtained by testing a notched-beam specimen and using linear elastic fracture mechanics. The proposed R -curve simulates well the geometry dependency as well as other characteristics of the fracture response of quasi-brittle materials.     

基于感知器的快速彩色图像无损压缩算法

针对彩色图像像素和颜色分量之间存在的相关性，将神经网络中的感知器技术引入彩色图像的无损压缩算法中，提出了一种新的预测模型。应用感知器的自学习和自适应能力，对预测值进行自适应调整，使算法在运行过程中具有很小的预测残差并具有较小的动态范围。同时应用颜色空间变换来减小颜色分量间的相关性。相对于新的国际标准JPEG—LS，这种预测模型具有较低的计算复杂性。对比实验结果说明，这种算法的性能明显优于传统算法，在压缩比损失很小的前提下，其执行速度高于JPEG—LS。     

Some experimental findings in compression-after-impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/epoxy flat plates

Compression-after-impact (CAI) tests have been conducted for quasi-isotropic thick plates with 48 plies by using the NASA method and on plates with 32 plies by using the SACMA method. Specimens are made of CF/PEEK (APC-2) and conventional CF/epoxy for the NASA plates and CF/epoxy for the SACMA plates. In the NASA CAI tests, the sequence of delamination buckling and its propagation is clearly revealed through various experimental techniques. One major technique is moiré topography, and the other is thermo-mechanical stress analysis with a high-accuracy infrared sensor. The arrest of delamination propagation just before catastrophic failure due to high fracture toughness is clearly captured by the moiré camera. This behavior provides good CAI values of CF/PEEK. The initial buckling properties of the delaminated region by the impact are then extensively discussed. Numerical predictions of initial buckling stress have been obtained by modelled geometry of the delaminated region simplified from its precise structure clarified by ultrasonic C-scanning. They agree fairly well with the experimental results. The in-plane stress distribution in the delaminated region before initial buckling is measured by an infrared stress graphic system. This compared favorably with finite element predictions. Two types of symmetric buckling modes with respect to the central plate surface, twin and single peak ones, are experimentally captured.     

克拉2气田储层岩石的应力敏感性及其对生产动态的影响

克拉2气田是一个异常高压气藏，压力系数在2．0以上。在衰竭式开采条件下，其地层压力降幅可为普通气藏地层压力降幅的3倍以上，因此研究储层岩石应力敏感性及其对生产动态的影响意义重大。研究得出，岩石的应力敏感性特征主要有：岩石物性对应力的敏感性总体上不大，其中以孔隙度最小，渗透率次之，压缩系数最大；岩石物性随地层压力的下降而下降；在同一地层压降下．岩石物性下降幅度不是渗透率的连续函数，而是与渗透率分布范围有关，高渗透率范围，岩石物性下降幅度小，低渗透率范围，岩石物性下降幅度大。研究得出，克拉2气田岩石的应力敏感性对其生产动态的影响较小。     

塔巴庙区块气层录井参数分析研究

塔巴庙区块气藏属于低压、低渗气藏,储集层物性差异大、含气级别高,但含气非均质性强,录井解释评价困难。针对这一问题,开展了综合判断储集层物性和含气性方面的研究,分别探讨了钻时与全烃、钻井液性能与全烃、钻井液粘度与全烃、气测显示与测井参数和烃组分与气显示之间的关系,分析了其相关性及其在塔巴庙区块气层解释评价中的意义及作用。通过相关性研究,不但摸索出定性解释评价气层的方法,同时为今后深入研究录井相关参数关系,探索其内在规律,为实现准确解释评价储集层奠定了基础。     

气体悬浮焙烧炉内衬烘炉曲线的确定

根据所使用的低水泥浇注料的性能，对中铝山西分公司检修厂4号焙烧炉制定了合理的烘烤曲线，提高了耐火内衬的质量，延长了内衬的使用寿命。     

提高中高含水期油井压裂经济效益的方法

为提高葡北油田中高含水期油井压裂经济效益，合理选择压裂井层尤为重要。应用水驱特征曲线预测出油井压裂前可采储量，从而计算出剩余可采储量及可采储量采出程度，通过绘制油井压裂前剩余可采储量及可采储量采出程度与油井压裂后所创经济效益之间关系曲线，寻找出相关规律，进行优选压裂井，再根据精细地质研究成果，在剩余油富集区选择具体压裂层位。经实际应用，取得了较好效果，提高了油井压裂方案符合率，提高了经济效益，进而总结出一套适合葡北油田中高含水期油井压裂选井选层方法，对今后进一步搞好油井压裂增产工作具有指导意义。     

Modeling the effect of pigment morphology on the dynamic compression of coating layers using DEM

In the present paper, discrete element method (DEM) was employed to investigate the effect of pigment morphology on packing dynamics and compressive behavior of paper coating layers in calendering process. Spherical, platy, and needle-like particles, representing GCC, delaminated clay, and aragonite PCC pigments, were considered in this study. For each particle shape, the compression of coating structures formed by mono-sized and poly-dispersed pigments were modeled. Stress–strain behavior of the coating layers and in-plane and out-of-plane movements of the pigment particles during the compression were computed under the same maximum compressive stress. Simulation results revealed that the in-plane movements of the pigment particles during compression in the calender nip were small in magnitude (<0.35 μm). These findings help to better understand the smoothening phenomena of coating structures during the calendering process.     

1270轧机弹性曲线的回归及参数估计

首先介绍了轧机弹性曲线的基础知识及 1 2 70轧机AGC系统的基本结构 ,然后论述了数据采集的方法 ,最后根据最小二乘法得到轧机弹性曲线的回归模型及刚度系数的实验结果。     

Step response classification for model-based autotuning via polygonal curve approximation

A model-based autotuning method consists of an identification and a regulator tuning phase. To achieve satisfactory performance and robustness, it is advisable that both phases be tailored a priori to the characteristics of the observed process dynamics. Such characteristics include, but are not limited to, the model structure. For example, overdamped and underdamped models with the same pole-zero structure are parametrised and controlled in different ways. Step response data, that are typically used for the identification phase in the autotuning context, can also be pre-processed to reveal those characteristics. This paper presents a step response classification method suitable for the above purpose. The method is based on a polygonal curve approximation technique for data pre-processing, followed by a neural network classifier. Only normalised I/O data are employed, so that the neural network can be trained off-line with simulated data. Simulation results are reported to show the effectiveness of the proposed classification method in terms of the achievable tuning results.