Control of structure and tack properties of acrylic pressure‐sensitive adhesives designed by a polymerization process

Free radical emulsion polymerization of methyl methacrylate (MMA) and 2‐ethylhexyl acrylate (EHA) results in the synthesis of pressure‐sensitive adhesives (PSAs) with good tack properties. Management of both the copolymer composition and the polymerization process allows one to control the behavior of the PSA. Semicontinuous (SC) processes create polymer particles whose instantaneous composition is close to that of the feed particle The SC Mixture process (continuous feeding with comonomer blends) affords nearly homogeneous latex particles and PSA films. The SC Gradient process (separate feedings at inversely varying rates) affords heterogeneous particles and films. The Batch process leads to somewhat heterogeneous films, but the hard (MMA‐rich) microdomains are made compatible with their soft (EHA‐rich) matrix because of the assumed formation of tapered‐type copolymers. Tack measurements indicate the importance of the particle and film structures. Too much hardness or softness leads to unacceptable lacks of adhesion and cohesion, respectively. Homogeneous structures prove adequate, but their tack properties collapse with rising temperature. Heterogeneous structures, with extensive phase segregation, prove unsatisfactory because they lack adhesion and cohesion. Finally, the association of well‐balanced composition and compatible heterogeneity is the criterion for suitable PSA behavior. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2749–2756, 2003     

五号桩—长堤地区沙河街组砂体储集性及控制因素研究

沙河街组是沾化凹陷东部五号桩-长堤地区重要的储油层系，主要目的层段为沙三段和沙二段。沙三段和沙二段主要发育有浊积扇、水下冲积扇和滩坝沉积体系，在浊积扇、水下冲积扇中发育辫状水道、扇中前缘、辫状水道间以及扇根、扇缘等沉积微相类型，其中辫状水道、扇中前缘砂体物性好，原生孔隙及次生孔隙均较发育，辫状水道间以及扇根砂体物性较差。其储集特征主要受岩性、沉积微相、成岩作用等因素控制，结合该地区实际情况，将沙二段、沙三段储集层划分为好、中、差3种类型。图4表1参7     

CONSTITUTE AND PROPERTY OFα-Ti AFTER HYDRIDING TREATMENT

研究了氢化处理对退火α-Ti 板材的组织、结构及性能的影响。α-Ti 在室温出现两种结构的氢化物:有序的fctγ相(TiH)和fccδ相(TiH_2)。分析了用X 射线衍射只查觉到δ相的原因。氢化物的数量及形态影响除氢后基体的晶粒组织。控制氢含量可以改善拉伸性能及疲劳性能。     

四川优质苧麻的结构和性能研究

本文采用扫描电镜、Ｘ射线衍射仪以及常规仪器分析的方法测试了四川优质麻－达县红皮小麻和大竹青白麻的形态结构，超分子结构和力学性能，并与棉纤维进行了对比．实验表明，精干麻表面光洁．有裂纹裂缝等结构不匀点，取向度高，结晶度高，断裂强度高，刚性和断裂比功大，而延伸小；纤维粗．在主要指标上，红皮小麻优于青白麻。     

复合材料压缩破坏模式的缺陷敏感性

本文基于弹塑性分叉理论研究单向纤维增强复合材料的压缩破坏模式和压缩强度对缺陷的敏感性问题。对于常见复合材料,所得结论是:无缺陷或者小缺陷情况的破坏模式为倾斜破坏带;大缺陷情况的破坏模式为水平破坏带;形成水平破坏带的压力值小于形成倾斜破坏带的压力。     

Material constant sensitivity boundary integral equation for anisotropic solids

In this paper, the material constant sensitivity boundary integral equation is presented, and its numerical solution proposed, based on boundary element techniques. The formulation deals with plane problems with general rectilinear anisotropy. Expressions for the computation of sensitivities for displacements, tractions, strains and stresses are derived, both for boundary and interior points. The sensitivities can be computed with respect to the bulk material properties or to the properties of part of the domain (inclusions, coatings, etc.). To assess the accuracy of the proposed approach, the computed results are compared to analytical ones derived from exact solutions obtained by complex potential theory, when possible, or finite difference derivatives otherwise. Copyright © 2005 John Wiley & Sons, Ltd.     

软土地基水泥搅拌桩室内配合比试验分析

对广州南沙某工程软土地基搅拌桩室内不同配比的水泥土标准试件进行对比试验,研究软土地基搅拌桩施工中水泥、石膏等添加剂的最佳配比方案,对指导搅拌桩的现场施工有着重要的意义。     

让住户满意的物业管理职能研究

从使住户满意的角度研究了物业管理中的计划、组织、领导、控制和创新五项职能,以指导物业管理企业提高管理水平和服务质量.     

广西某矿区托帕石的宝石学特征

广西某矿区的脉石矿物——黄玉分三个世代,其中第三世代的黄玉晶体无色透明,重量大于0.9克拉,瑕疵不明显,密度(3.50)、硬度(7.8430)和折射率(1.6330)等特征均达宝石级,经系统研究测试,可以命名为托帕石(Topaz)。     

后热处理对新型马氏体耐热钢焊缝性能的影响

针对电力施工过程中对具有冷裂倾向的马氏体型耐热钢焊后后热处理时机选择与标准存在差异，即是否必要在冷却至100-120℃恒温一段时间后再进行后热处理的问题，安排了一系列的试验对后热处理的最佳时机予以讨论，对热处理后的焊缝组织进行力学性能试验和金相分析，对冲击后的试样进行了断口分析。试验证明，后热处理时机的不同对马氏体耐热钢焊缝冲击韧度有比较大的影响，马氏体耐热钢的后热处理应在马氏体转变完全后开始较为合适。