制备方法对复合触头材料导电特性的影响

根据复合材料制备方法的各自特点 ,建立了计算复合触头材料电导率的三维单元网络模型。应用该模型研究了制备方法对材料电导率的影响 ,并与测量值进行了比较。结果表明了这种模型的可行性。     

水性聚氨酯电导率与聚沉值的研究

研究了软（硬）段含羧基的水性阴离子纳米聚氨酯体系的n(NCO)/n(OH)比值，COOH的质量分类，反离子各类，合成方法与电导率关系及产生的原因；探讨了该体系的n(NCO)/n(OH)值，COOH的质量分数，合成方法与临界聚沉值（Cc.c)的关系和规律。并分析，比较了软（硬）段含羧基的水性阴离子聚氨酯体系电导率与Cc.c二者关系，得出了随COOH的质量分数升高，二者变化相同，随n(NCO)/n(OH)比值升高,二者变化相反的结论。     

Magnetic separations in biotechnology—a review

Magnetic separation technology has a broad range of potential applications in both small and large scale biotechnology. This review considers a selection of magnetic techniques and their possible uses.     

水平浓缩燃烧器在65t/h煤粉炉上的应用

介绍65t/h煤粉炉的基本概况和存在的问题，详细阐述了采用水平浓缩煤粉燃烧技术对原燃烧器的改造过程，对改造前后运行参数及经济效益进行了对比。     

Pulsed field gradient n.m.r. measurements and theoretical interpretation of the self-diffusion of polystyrene in solution

The self-diffusion coefficients of polystyrene dissolved in C₆D₆ were measured by means of pulsed field gradient n.m.r.. The dependence on the molecular weight was of the power of -2 in accordance with the reptation model. The concentration dependence was theoretically calculated within the blob concept which shows that in the crossover region the self-diffusion coefficient is determined only by the blob dimensions and the monomeric friction coefficient is constant. The calculated concentration dependence agrees well with that observed by the authors.     

Breaking of structural dormancy in seeds of Tetrapleura tetraptera by Aspergillus niger

Aspergillus niger (strain UUF9202) significantly reduced the dormancy period and boosted aggregate germination percentage (AGP) in seeds of Tetrapleura tetraptera. A net reduction in mean germination time (MGT) to 12 days and an increase from 0 to 42% AGP were obtained in 32 days. The optimal spore inoculum of the fungus was 8.5 × 10≥10 ml^?1 per 100 seeds in 96 h pregermination incubation. The potential of some physical factors in combination with this fungal concentration in enhancing AGP was evaluated. The treatments were as follows: (i) hot water scarification at 30°C, 50°C, 80°C and 100°C plus A niger; and (ii) nicking by decoating at either the micropylar or chalazal ends plus A niger. Micropylar scarification plus A niger gave the highest AGP (94%) followed by chalazal scarification plus A niger (86%) and hot water dip at 80°C + A niger (82%). The control seeds which were soaked in presterilised (by autoclaving at 121°C for 15 min) A niger spore suspension at 30°C gave zero germination.     

高温用（SiC—AlN）Mo功能梯度材料的加工

讨论了热屏蔽用（SiC－AIN）／Mo功能梯度材料的粉末冶金加工。利用钼作为基体材料，以承担结构强度和连接可能性。根据在1000K温差内的完全热传递，研究了组分配置的设计，并且以最佳的组分配置成功地加工出了（SiC－AIN）／Mo功能梯度材料的烧结坯料。     

应用计算机实现选矿自动化

本文就太钢尖山铁矿计算机控制系统的硬件构成，顺控系统的软件编制、模拟调试以及现场调试等方面展开论述。     

梯度折射率棒中传播的高斯光束轨迹解析解及其存在条件的讨论

本文提出光束轨迹方程的一般解，导出解析解的存在条件，推广了文献［１］的光线传播理论，文中以一特定梯度折射率棒为例，讨论了高斯光束在棒中的传播特性。     

电解法烟道气二氧化硫在线监测系统的设计

介绍了一种烟道气中SO2在线检测系统，该系统可以实现24h不间断地监测烟道气中SO2的体积分数和质量浓度，同时将信息经网络传送给环保有关部门，具有一定的新颖性、可靠性、准确性。