不连续增强镁基复合材料的界面行为

综述了近年来国内外关于Ａｌ２Ｏ３短纤维、ＳｉＣ晶须、ＳｉＣ颗粒、Ｂ４Ｃ颗粒增强镁基复合材料的界面结构及其对复合材料性能影响的研究进展，并对今后的研究提出了一些看法。     

SW233 PIN驱动器自动测试系统的研制

介绍了一种集成电路自动测试系统，该系统采用计算机并口作通信接口，用VB6编程，实现了对外围测试电路的控制，用IEEE-488接口卡控制测试仪器，可对SW233电路的36个参数进行自动测试，并将测试结果自动保存在数据库中。该测试系统具有自动化程度高、操作方便、测试结果精确等特点。     

偶联剂对玻璃纤维/环氧基复合材料界面介电性能的影响研究

本文研究了五种偶联剂对玻璃纤维浸润性能和玻璃纤维/环氧基复合材料界面介电性能的影响。结果表明,玻璃纤维经偶联剂处理后,其浸润活化能降低,与环氧树脂基体间的相容性及化学反应活性得到改善;因此赋予了玻璃纤维与环氧基体间以良好的界面粘结性能,从而提高了玻璃纤维/环氧基复合材料界面的介电性能。其提高的幅度大小与偶联剂的极性及化学结构有关。     

VC .net中利用拆分窗口功能界面切换的实现

介绍了在VC .net的运行环境下运用拆分窗口功能实现界面切换的步骤及具体实现方法,并给出了关键的实现函数与事例.     

钻井工程固井胶结界面研究现状

固井质量问题在石油勘探开发中备受关注，对特殊工艺井钻井、油水井开采寿命和勘探开发效益有直接的影响。对固井胶结界面的研究是从根本上提高固井质量的一项基础性研究工作。为了推动固井胶结界面研究工作的开展，分析了国内外近年来有关固井界面研究的文献，阐述了开展固井胶结界面基础研究工作的意义，着重分析了这一研究领域目前所采用的研究方法，以及提高固井界面胶结强度的主要途径。在分析文献的基础上，提出今后深入开展固井界面研究工作的重点是：1）继续完善研究方法；2）重视动态研究；3）从胶结界面的微观结构和钻井工程整体系统的角度开展研究工作；4）注重改善胶结界面水化产物的微观结构和钻井工作液之间的协调增强作用。     

适用于LED显示屏或照明工程的异步控制卡DS2000-M1

DS2000-M1是高性能、开放式的LED控制系统,本文从软硬件两方面简述其设计原理。     

Developing real-time knowledge-based systems with PERFECT

PERFECT (Programming EnviRonment For Expert systems Constrained in reasoning Time) is aimed at providing the necessary engineering support in real-time knowledge-based system development. PERFECT bridges the gap between the traditional analysis and design methodologies, and the implementation tools for these systems. It does so by providing the means to construct a knowledge model and to choose a suitable inference strategy. Subsequently the properties of the knowledge model and inference strategy may be analysed. For instance, it may be checked whether the knowledge model contains sufficient knowledge to diagnose a fault in an industrial process. Moreover, it may be checked whether the inference engine is able to provide an answer to a certain problem in time. If not, the analyser of PERFECT proposes an alternative structure of the knowledge model. When the constructed knowledge model and the chosen inference strategy show the required time efficiency, the compiler of PERFECT may translate them to an actual real-time knowledge based system in COGSYS. In addition, guidelines are provided with respect to the design of the human-machine interface. The resulting system is an instrument—a source of information that can be used by the human operator during problem-solving, rather than a prosthesis—a device that solves the entire problem by itself and presents the outcome to the human operator.     

Thick bone section preparation using a silicon-rubber-based sealant

A method has been developed, using a silicon-rubber-based sealant, which allows 2–3-mm-thick specimens to be maintained in a protected fluid environment for a number of months, without risk of dehydration. Following this, the specimen can be retrieved, stained, embedded and sectioned further. For example, 2-mm-thick sections of fixed unstained bone are easily examined by means of epi-illuminated polarized light and fluorescence microscopies using either conventional or confocal optics. The method could easily be extended to other tissues, for example brain tissue.     

三维立体成像及其应用

本文首先介绍了三种传统的主要三维立体成像方法，即透镜板三维成像方法，投影式三维显示和全息照相术，其次，重点对于采用计算机产生的三维立体景象的方法进行了综述，其中包括人们近年来研究较多的自动立体成像技术等，最后给出了三维立体成像技术在航空航天，工业，教育，医学，军事等领域的应用实例，并预测了三维立体成像技术今后的主要发展方向。