A universal dependence for thermal conductivity of metals and dilute alloys

A universal curve relating the maximum of thermal conductivity and its respective temperature with the residual electrical resistivity has been proposed for metals and dilute alloys. Based on the equation of that curve, a comparative analysis of selected literature data of thermal conductivity of metals, which have residual electrical resistivity in the range 10^–11<₀<10^–5. cm, have been performed. Using the data for 33 metals, confirmation of the Wiedemann-Franz law for the impurity component/T of thermal conductivity was obtained, which means that _th/_el1, where _th and _el are the parameters of the electron-lattice defect interaction obtained from measurements of thermal and electrical conductivity, respectively. Examples of the failure of the Wiedemann-Franz law are also presented, exhibiting the values of _th/_el in the range 0.16 to 25. Measurements of thermal conductivity in the range 2 to 20 K and determination of the residual electrical resistivity for the samples of Cd doped with Zn and quenched were performed, resulting in values _th/_el1.     

Differential equations for a dynamic thermal conductivity experiment

The mathematical model that describes a dynamic thermal conductivity experiment is reconsidered by taking into account the role of thermal expansion. Two differential equations are presented that take into account the various physical phenomena occurring in a long thin rod directly heated by a current pulse. One of the two equations keeps variables space and time completely separate and is particularly useful for computer simulations.Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.     

Thermal transport behavior of van der Waals solids and liquids in the neighborhood of the solid-liquid phase transition

The thermal conductivity, , is one of the few transport coefficients which shows a relatively small change at the solid-liquid phase transition, and hence it is a property that can be used in comparing dynamic properties of both ordered and disordered systems. Although the discontinuity in can be accounted for largely by the difference in density, , of solid and liquid at the phase transition, its volume dependence is examined more closely. The thermal diffusivity, which is known to dominate the dynamic structure factor of liquid argon, has been determined around the phase transition also; the sound velocity has been considered in addition. The results are discussed and a comparison is made with these properties in solid and liquid benzene and cyclohexane.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

Synthesis,Micellization, and Surface Activity of Novel Linear-Dendritic Carboxylate Surfactants

Two generations of novel linear-dendritic carboxylate surfactants C₁₈-G₁-(COONa)₂ and C₁₈-G₂-(COONa)₄ have been synthesized by the divergent method and their structures are characterized by ¹H Nuclear Magnetic Resonance and Infrared analysis. The electrical conductivity measurement is used to measure the Krafft temperatures of C₁₈-G₁-(COONa)₂ and C₁₈-G₂-(COONa)₄, which are much smaller than those of the corresponding conventional surfactant sodium stearate. The markedly enhanced solubility of two linear-dendritic surfactants is ascribed to the high hydrophilicity of surfactant headgroups induced by the carboxylate and ester groups. The critical micelle concentration (CMC) values obtained from both the electrical conductivity and surface tension measurements indicate that the micellizations of linear-dendritic surfactants become favorable with the increase in the number of the surfactant headgroup. However, the surface activity parameters including the surface tension at the CMC, maximum surface excess, and minimum surface area reveal that C₁₈-G₁-(COONa)₂ exhibits greater efficiency in absorbing at the air/water interface compared to C₁₈-G₂-(COONa)₄, owing to their different steric repulsions of the surfactant headgroups. In addition, C₁₈-G₁-(COONa)₂ and C₁₈-G₂-(COONa)₄ have higher emulsifying ability than the conventional surfactants sodium stearate and sodium octadecyl sulfate.     

大型软包锂离子电池的热物性实验研究

针对大型软包锂离子电池热物性参数的测定问题,提出适用于该型电池的热参数表征方法. 基于准稳态导热原理,建立电池的传热理论模型. 开展实验研究电池的比定压热容和导热系数与温度的依变关系,分析热损对测试结果的影响,对测试方法的有效性进行验证. 结果表明,电池比定压热容随着温度的升高而线性增大,导热系数受温度的影响较小. 在900 s内可以测得电池热参数在10~60 °C下的变化状况,实验验证结果显示测算精度高于92.3%,具有测算周期短、准确度高和测试灵活等优势.     

强化三元混合熔盐的传热性能的实验研究

太阳能发电技术中传热性能的优劣影响着太阳能的利用程度。选用石墨作为强化相变材料传热性能的添加剂与三元混合熔盐（K₂CO₃-NaCl-Li₂CO₃）按照石墨质量分数为5%、10%、15%进行混合制备,使用TC3000通用型导热系数测试仪测定16种试样的导热系数。并测试经历300次循环储能、释能实验试样的导热系数循环稳定性。实验结果表明：添加石墨后的混合相变材料导热系数最高可提升至原混合材料的3.38倍,当石墨的质量分数为15%时,混合相变材料的导热系数最大。在经历300次储能、释能实验后,材料的导热系数基本保持稳定,变化浮动不高于15%。石墨作为强化材料的添加剂,可有效提升强化材料的传热性能,具有实际工程的应用价值。     

Processing of yttria partially stabilized zirconia thermal barrier coatings implementing a high-power laser diode

Several studies have been undertaken recently to adapt yttria partially stabilized zirconia (YPSZ) thermal barrier coating (TBC) characteristics during their manufacturing process. Thermal spraying implementing laser irradiation appears to be a possibility for modifying the coating morphology. This study aims to present the results of in situ (i.e., simultaneous treatment) and a posteriori (i.e., post-treatment) laser treatments implementing a high-power laser diode. In both cases, the coatings underwent atmospheric plasma spraying (APS). Laser irradiation was achieved using a 3 kW, average-power laser diode exhibiting an 848 nm wavelength. Experiments were performed to reach two goals. First, laser post-treatments aimed at building a map of the laser-processing parameter effects on the coating microstructure to estimate the laser-processing parameters, which seem to be suited to the change into in situ coating remelting. Second, in situ coating remelting aimed at quantifying the involved phenomena. In that case, the coating was treated layer by layer as it was manufactured. The input energy effect was studied by varying the scanning velocity (i.e., between 35 and 60 m/min), and consequently the irradiation time (i.e., between 1.8 and 3.1 ms, respectively). Experiments showed that coating thermal conductivity was lowered by more than 20% and that coating resistance to isothermal shocks was increased very significantly.     

AlCl3-BMIC离子液体的电导率

研究AlCl3-BMIC(氯化-1-甲基-3-丁基咪唑)离子液体电导率与温度、组分之间的关系。结果表明:当离子液体中AlCl3的摩尔分数x(AlCl3)<0.667时,离子液体的电导率随着x(AlCl3)的增加而增大;但在0.6670.5的路易斯酸性区域,x(AlCl3)对温度系数α、β的影响均不明显。     

变形体温度场和位移场的计算

本文用热源法对简单热传导问题进行了解析解的计算，并应用PDE工具箱求解热传导偏微分方程得到数值解。通过两种温度场的计算结果求出相应的位移场结果，比较可知MATLAB中PDE工具箱对难以用解析法求解的热传导问题有一定的指导作用。     

Preparation and characterization of high salts polymer electrolyte based on poly（lithium acrylate）

1　INTRODUCTIONWorldwide research and efforts are currentlyunderway to fabricate all solid state, rechargeableLi and Li ion batteries utilizing Li+ conductivepolymer electrolytes[1]. Solid polymer electrolytespossesses many advantages including high ionicconductivity, high specific surface energy, solventfree, wide electrochemical stability windows, lightand easy processability[2]. Apart from polyethy lene oxide ( PEO )[3], poly ( vinyl alcohol )(PAV)[4], …