尿素/添加剂湿法脱硝技术的研究进展

燃煤电厂排放的NOx对环境造成了严重的污染。通过研究,尿素添加剂湿法烟气脱氮技术可以应用于火电厂锅炉烟气的治理过程。结合尿素/添加剂湿法脱硝工艺机理,系统的介绍了不同添加剂对应的脱硝反应原理,分析了添加剂不同时反应机理的差异,指出不同添加剂情况下影响脱硝效率的问题,并针对我国国情对尿素/添加剂湿法脱硝工艺的发展方向提供了建议。尿素湿法脱硝工艺流程简单,并且没有二次污染,同时,添加剂对尿素湿法脱硝有着很重要的作用。     

中国传统岁时节日食俗在餐饮业的应用研究

餐饮企业是中国传统岁时节日食俗在当代有效传承的重要场所和平台之一。文章探讨了研究中国传统岁时食俗在餐饮业应用的积极意义,梳理和总结了中国传统岁时食俗在餐饮业应用的历史和现状,并提出了餐饮业应用中国传统岁时食俗的对策,即以合适的品种为中心、倡导大众餐饮,以成功的经验为基础、加强宣传和营销等,以更好弘扬中国传统文化,促进中国餐饮业的发展。     

喷嘴湿气井两相流在线计量装置研究及应用

传统的湿气井计量大多采用分离法,存在工艺流程复杂、造价高昂、占地面积大等缺陷。研制了以喷嘴为节流元件的湿气井气液两相流在线计量装置。应用Fluent软件仿真模拟了单相气、单相液、气液两相流过装置的流动特性,计算了虚高系数,建立了气液两相含率在线计量模型。CFD研究及现场应用表明:该装置模型计量精度高,气相计量误差在5%以内,液相计量误差在8%以内。该装置结构简单,可以将温度、压力、差压、气流量、液流量集成在一个表头显示,可以异地重复使用,维护量少,降低计量设备安装与维护成本,满足气田开发工程计量的需要。     

Development and implementation of a hybrid scale up model for a batch high shear wet granulation operation

The high shear wet granulation (HSWG) operation consists of several rate processes influenced by the raw material properties, process operational parameters, and equipment design. Their combined effect determines the granule attributes. In literature, these rate processes have been modeled using different dimensionless numbers and their correlations. Each of these dimensionless numbers represent only certain rate processes. Since many of these rate processes occur at the same time, it is necessary to simultaneously model them to account for all the important degrees of freedom. Most of the HSWG scale up approaches in literature calculate scale up conditions based on a single rate process or operating parameter of interest that can lead to sub-optimal process design. We present the development of a hybrid HSWG scale up model accounting simultaneously for all the rate processes. The approach was successfully implemented to scale up the HSWG operation across laboratory, pilot, and commercial scales.     

无溶剂重防腐环氧涂料的制备与研究

采用中低相对分子质量树脂体系以及改性脂环胺固化剂,以化学、物理防锈颜料,体质填料为粉料体系制备无溶剂重防腐环氧涂料。通过 EIS、划线盐雾剥离、耐 3. 5% NaCl溶液和 10% NaOH溶液、混合溶液浸泡后的附着力,研究了涂层屏蔽性、耐碱性、湿态附着力。结果表明：铁钛粉、 绢云母粉、长石粉粉料体系涂层屏蔽性、耐碱性最佳;改性脂环胺固化剂屏蔽性好,湿态附着力性能优异;采用 EIS、划线盐雾剥离,耐 3. 5% NaCl溶液、 10% NaOH溶液浸泡以及混合溶液浸泡后附着力下降程度来评价涂层屏蔽性、耐碱性、湿态附着力性能具有一定的可参考性,研究结果与涂层耐阴极剥离实验性能正相关,可用于涂层耐阴极剥离性能的早期评价与判断。     

露天铝土矿山粉尘治理措施

介绍了露天矿山铝土生产流程、产尘源及产尘设备。针对各产尘源的治理进行了分步分析。提出了治理措施。从而有效降低了铝土露天矿山生产过程中外排及岗位粉尘浓度。     

水平管内流型转换区湿气流经多孔板的压降特性

较之于传统的单孔板,多孔板有压损系数小、整流、低噪声等多方面优点,在湿气流量测量中具有重要应用价值。以空气和水为两相工质,在水平管内湿气流型转换区对小孔分别呈圆形和矩形的2个多孔板的压降特性进行了实验。结果表明:圆孔、槽孔多孔板的湿气压降特性无明显差别;多孔板的气相压降倍率与气相、液相弗劳德数均密切相关;与实验结果相比,现有均相流模型的预报结果均偏高,现有分相流模型的预报结果均偏低;通过气相、液相弗鲁德数双参数对孔板湿气压降模型进行修正,可明显提高压降关联式的预报准确度;基于均相流模型双参数修正所得的多孔板压降关联式的预报精度最优,对圆孔多孔板、槽孔多孔板的预报偏差分别在±7%、±10%以内。     

新型水下焊接电源及送丝机构的研究

研究了一种新型的水下焊接系统。系统中孤焊电源输出阶梯型的外特性，送丝系统采用脉动送丝方式。在单片机控制下，脉动送丝波形与外特性同步调控。在停止送丝阶段，单片机夸电源输出电压为峰值，焊丝在此电压下返烧并形成熔滴。送丝脉冲到来的瞬间，电源输出电压切换为基值。熔滴依靠送丝动量向熔地方向前进，最终向熔池过渡，随着焊炬的移动而彤成一道焊缝。实验结果表明，使用这个系统进行气体保护药芯焊丝水下湿法焊接时，电压、电流波形均匀工整，短路过渡频率受控，焊接过程稳定，水下焊缝成形较为美观。     

Machining characteristics and fracture morphologies in a copper-beryllium (Cu-2Be) alloy

The technology of materials removal is improved greatly by the introduction of advanced cutting tools like cubic boron nitride, ceramics, polycrystalline diamond and the more recent whisker-reinforced materials. In this paper, the influence of cutting temperature on machinability, mechanical properties, microstructure, and fracture morphology of Cu-2Be alloy using a polycrystalline diamond cutter is investigated. The information on machining, microstructure, and fracture morphology of Cu-2Be alloy are very useful to understand their fabrication characteristics and the basic mechanisms of its deformation and fracture. The machinability (in terms of surface finish) of Cu-2Be alloy is evaluated as a function of cutting temperature, resulting from wet and dry cutting. Machining is carried out on a Hardinge Cobra 42 CNC machine (Hardinge Inc., Elmira, NY), and the machining parameters used—cutting speed, depth of cut, and feed rate—are kept constant during both wet and dry cutting. The machined surface finish on Cu-2Be alloy is measured using a surface finish analyzer (Surftest 401, series 178) technique. The machined specimens are examined for their strength and hardness properties using a standard Universal Testing Machine and Rockwell hardness tester, respectively. Wet cutting (using coolants) produced a smooth surface finish when compared with dry cutting of the Cu-2Be alloy. The machined specimens are examined for their microstructural features using a Nikon optical microscope. The specimens are etched using a suitable etchant solution for revealing such microstructure constituents as grain size, phase proportions, and the possible overheated areas (especially in dry cutting). The fractured surfaces from the tensile and impact toughness tests are investigated for their fracture morphologies (dry and wet cutting) using a microprocessor-controlled scanning electron microscope (Jeol Model JSM 5910 LV). A detailed analysis is also made to understand and interpret the basic fracture mechanisms responsible for crack initiation and crack propagation. The Cu-2Be alloy showed relatively higher mechanical properties in wet cutting in comparison to dry cutting operations. Fracture studies demonstrated intergranular and ductile fractures as dominant modes of fracture mechanisms in Cu-2Be alloy.     

2010年长江流域暴雨洪水初步分析

分析2010年长江流域暴雨洪水,有利于更全面认识长江流域暴雨洪水特性,可为今后更好开展长江流域防汛水情保障工程。从主汛期长江流域暴雨及气候特征、干支流主要洪水过程及洪水特性等方面,进行了初步的总结和分析。2010年长江主汛期洪水发生范围广、持续时间长且局部地区洪水量级大,通过与三峡水库蓄水前后几次大的历史洪水分析对比,初步认为,2010年长江流域主汛期出现的洪水为长江上中游区域性较大洪水。