双稳态孤子

对于具有一定形式非线性的薛定谔方程，存在单孤子解的多稳态，也就是说对于相同能量，单孤子具有不同的传输常数．本文以一非线住形式Ｌｉｎｅａｒ　Ｓｍｏｏｔｈ　Ｓｔｅｐ（ＬＳＳ）函数为例，对孤子的双稳态进行理论分析，并对其双稳态的光学转换进行数值模拟．     

填料萃取塔液泛速度的计算

介绍了三种有代表性的填料萃取塔的液泛速度计算公式，并通过它们用于三种典型的液-液实验体系和两种不同填料的计算结果的比较，对这些公式的适用范围进行了讨论。     

An equation of state for 1,1-difluroethane (HFC 152a)

An equation of state for 1,1-difluoroethane (HFC 152a, CH₃CHF₂) has been developed on the basis of reliable experimental data including PVT, liquid C_p, and saturated-liquid-density data measured by our group. It is a non-dimensionalized virial equation whose functional form is the same as that originally developed for 1,1,1,2-tetrafluoroethane (HFC 134a) in our group. The effective range is for pressures up to 15 MPa, temperatures from 230 to 450 K, and densities to 1000 kg m⁻³. The equation represents reliable PVT measurements within ± 1% in pressure for the superheated vapour and supercritical fluid, while within ±0.5% in density for the compressed liquid. In addition, it should be noted that the equation represents the other essential thermodynamic properties including vapour pressures, saturated-liquid/ vapour densities, isobaric/isochoric specific heats and sound velocity in both the liquid and gaseous phase of HFC 152a.     

Impact of uncertainties on estimations of heat pump cycle performance

Sensitivity analysis is used to show how uncertainties in basic factors, such as heat transfer, pressure drop, compressor efficiency, and thermophysical properties, influence the result of heat pump cycle performance estimations. By comparing the results of this analysis with uncertainty levels of estimations and experimental determinations, it is established to what extent improvements in accuracy are needed. The investigation was carried out for several different applications and, as working fluids, both pure substances and non-azeotropic mixtures were examined. It was found that evaporation heat transfer and compressor efficiency are two areas where improvements are needed. It is also shown that estimates using very accurate, substance-specific, equations of state differ from those using more general types by up to 1 % for COP and 2% for capacity.     

Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout

Tubular members are commonly used as an energy absorber in engineering structures and many such members have a cutout. In this study, the crushing behaviors of tubes with a cutout are characterized and the effects of cutout on the energy absorption capabilities of these tubes are quantified. Systematic parametric studies were carried out to study the effect of material properties, including yield and ultimate strength of material, strain rate effect, location of cutout, tube length and impact speed on the crushing behaviors and energy absorption capacity of aluminum and steel tubes. First, a numerical model was constructed with a commercial explicit finite element code. It will be first proven that the numerical simulation can produce sufficiently accurate results in an economic manner. Subsequently, the crushing behavior of aluminum and steel tubes with a cutout was experimentally characterized and their energy absorption capacity was evaluated in terms of mean crushing force, peak crushing force and specific energy absorption (SEA). Tubes of various lengths with a cutout located at different locations, subject to both quasi-static and dynamic impact loadings were considered. For steel tubes, the numerical simulation investigated the influence of the strain rate effect and variation in strain hardening ratio of the material. Empirical equations describing the mean and peak crushing forces of aluminum and steel tubes with a cutout were developed using linear and nonlinear regression methods applied to the results obtained from the numerical and experimental studies.     

F-X域粘弹性波动方程保幅偏移

提出了一种利用粘弹性声波波动方程进行偏移的新方法。其基本思路是,修改成像条件,使修改后的成像方程中考虑振幅补偿,然后利用粘弹性、单程波动方程在F-X域对震源和接收点波场进行延拓,进而完成散射、透射等补偿。理论数据处理和实际地震资料处理表明,该方法理论基础可靠,处理效果明显,能较好地解决实际地质问题。     

A new ‘Tailor-made’ methodology for the mechanical behaviour analysis of rubber-like materials: II. Application to the hyperelastic behaviour characterization of a carbon-black filled natural rubber vulcanizate

The purpose of this paper is the modelling of the mechanical behaviour of an elastomeric material, through detailed experimental and numerical procedures, specific to large strains. The experimental technique is based on in-plane kinematics measurements using a speckle extensometer, from which the whole two-dimensional field of in-plane displacements is obtained by a digital image processing [Polymer (2002)]. This part of the work concerns the identification of the constitutive equation for a carbon black natural rubber (NR) vulcanizate. We start by quoting some theoretical considerations relative to rubber elasticity and stress-softening effect, which is the counterpart of the filler reinforcement. Then, we describe the experimental procedure and present data for both non-preconditioned and preconditioned samples. Next, the identification of the constitutive law parameters using a minimization algorithm is driven. Finally, we present the validation of the constitutive model, by its implementation into the finite element code SYSTUS and the numerical simulation of the response of a double edge notched tensile (DENT) specimen.     

动态规划模型在生产存贮中的应用

利用动态规划模型研究了生产管理中生产存贮问题的数学模型，给出了动态规划的最优性原理和动态规划基本方程，并给出了该数学模型求解的一个实例。     

Ideal-gas thermodynamic properties for natural-gas applications

Calculating caloric properties from a thermal equation of state requires information such as isobaric heat capacities in the ideal-gas state as a function of temperature. In this work, values for the parameters of thec _p ⁰ correlation proposed by Aly and Lee were newly determined for 21 pure gases which are compounds of natural gas mixtures. The values of the parameters were adjusted to selectedc _p ⁰ data calculated from spectroscopic data for temperatures ranging from 10 to 1000 K. The data sources used are discussed and compared with literature data deduced from theoretic models and caloric measurements. The parameters presented will be applied in a current GERG project for evaluating equations of state (e.g., the AGA 8 equation) for their suitability for calculating caloric properties.     

电子直线加速器中计入纵向与横向耦合效应的束流包络线方程组

一、引言从束流动力学的观点出发,对于粒子束在直线加速器中的运动,有两种主要的分析方法,也即粒子轨迹跟踪法及考察束流包络运动的方法。前者是通过解单粒子运动方程,跟踪大量的单粒子运动轨迹而后进行分析;后者则是通过解束流的包络线方程,根据束流包络的变化来进