油气集输系统新增产能建设拓扑优化方法研究

在油气集输新增产能建设中,为充分利用已建管网系统的处理能力,达到降低投资,提高经济效益的目的,进行了油气集输新增产能建设布局优化方法的研究。针对新建集输管网为树状结构的情况,建立了油气集输系统新增产能建设拓扑优化的数学模型,讨论了计算复杂性问题。根据模型的特点,将问题分解为拓扑级优化和几何级优化两个子问题,并通过它们之间的迭代进行求解。实例计算表明,所建立的数学模型正确,求解方法可行,能用于工程实际设计。     

Fuzzy Multiobjective and Linear Programming Based Management Models for Optimal Land-Water-Crop System Planning

In this article, linear programming and fuzzy optimization models are developed for planning and management of available land-water-crop system of Mahanadi-Kathajodi delta in eastern India. The models are used to optimize the economic return, production and labour utilization, and to search the related cropping patterns and intensities with specified land, water, fertilizer and labour availability, and water use pattern constraints. Due to extreme backwardness of the study area, it has been decided to keep all the three objectives of the linear programming models at the same priority level to obtain the compromised solution in a fuzzy environment that incorporates the imprecision in fuzzy goals and fuzzy constraints. These non-structural models facilitate the conjunctive use of available surface water and groundwater resources. A comparative evaluation along with the benefit-cost ratios of the existing and proposed farming systems is also presented.     

Active set truncated-Newton algorithm for simultaneous optimization of distillation column

An active set truncated-Newton algorithm (ASTNA) is proposed to solve the large-scale bound constrained sub-problems. The global convergence of the algorithm is obtained and two groups of numerical experiments are made for the various large-scale problems of varying size. The comparison results between ASTNA and the subspace limited memory quasi-Newton algorithm and between the modified augmented Lagrange multiplier methods combined with ASTNA and the modified barrier function method show the stability and effectiveness of ASTNA for simultaneous optimization of distillation column.     

基于进化规划的自适应IIR滤波

针对基于梯度下降算法的自适应IIR滤波器（AIIRF）具有潜在的不稳定性和性能指标函数容易陷入局部极小而导致性能下降等问题，本文将进化规划用于AI－IRF的优化设计，不仅解决了AIIRF系统稳定性问题，而且有效地实现了滤波器性能指标函数的全局寻优和快速收敛，同时允许大动态范围的输入号。计算机仿真结果验证了基于进化规划算法的AIIRF的性能优于基于梯度算法的AIIRF，尤其对高阶、极点靠近单位圆的自适应IIR滤波器。     

Using internal fibre geometry to improve the performance of pin-loaded holes in composite materials

The anisotropic nature of fibre reinforced composites leads to large stress concentrations around pin-loaded holes through standard weave cloths. Proper understanding of how this anisotropic nature affects the load distribution around holes can be utilised to reduce these concentrations if sufficient thought is given to the internal fibre geometry near to the hole. Such local reinforcements need not be highly complex and can be readily produced without excessive effort, producing significant improvements in performance.     

邯钢轧钢工艺结构优化及发展方向

叙述了邯钢轧钢生产工艺结构及优化概况，指出了今后发展方向。     

基于曙光1000A的并行查询核心系统的设计与实现

根据曙光１０００Ａ的特点，提出了查询核心系统的设计方案；经过分析比较，选定了数据划分方法，确定了ＳＱＬ子集。在此基础上，研究了物理库设计、并行事务管理、查询优化器的设计和事务的调度方法，旨在为在曙光１０００Ａ上建造并行数据库系统奠定基础。     

Response level crossing rate of a linear system excited by a partially specified Gaussian load process

The problem of determining the maximum mean response level crossing rate of a linear system driven by a partially specified Gaussian load process has been considered. The partial specification of the load is given only in terms of its total average energy. The critical input power spectral (PSD) function, which maximizes the mean response level crossing rate, is obtained. The critical input PSD turns out to be highly narrow-banded which fails to capture the erratic nature of the excitation. Consequently, the trade-off curve between the maximum mean response level crossing rate and the maximum disorder in the input process, quantified in terms of its entropy rate, has been generated. The method of Pareto optimization is used to tackle the conflicting objectives of the simultaneous maximization of the mean response level crossing rate and the input entropy rate. The non-linear multi-objective optimization has been carried out using a recently developed multi-criteria genetic algorithm scheme. Illustrative example of determining the critical input of an axially vibrating rod, excited by a partially specified stationary Gaussian load process, has been considered.     

多约束的桥梁结构拓扑优化

基于ESO (Evolutionary Structural Optimization)的拓扑优化方法,本文提出了一种适应于桥梁结构的拓扑优化方法。引进了两种性能指标公式来确定最佳拓扑设计。另外,为了更有效地尝试改进最终设计的细节,而又不进行更精细有限元网格的完整分析,这里提出了一种精细网络设计方案。再者,结合细啃技术,完成了考虑应力、位移、频率约束的斜拉桥优化设计。通过几种桥梁的设计优化,表明该方法的可应用性、简洁性和有效性。