非接触CPU卡在环保排污上的应用

为确保环保排污重要数据交互、存储的安全性以及后台系统与前端总量计量设备数据传输的安全性,本文结合现有的排污许可证制度,提出了将国密SM1加密算法非接触CPU卡作为信息载体在环保排污上的应用模式,并对目前在浙江省环保领域应用的具体案例进行了剖析.     

Interaction of a shock pulse with a contact discontinuity

Passing of a triangular moderate-intensity pulse through a constant discontinuity is considered. Decay of the shock wave that passed into the second gas is analyzed. Damping of the detonation wave after burnout of the combustible mixture is discussed. __________ Translated from Fizika Goreniya i Vzryva, Vol. 43, No. 4, pp. 102–107, July–August, 2007.     

A glue method for fabricating membrane electrode assemblies for direct methanol fuel cells

We present a simple glue method for fabricating membrane electrode assemblies (MEA) for direct methanol fuel cells (DMFC). Rather than the conventional “dry” hot-pressing method that relies solely on hot-pressing at a high pressure and temperature to form a MEA, the “wet” method developed in this work introduces a binding agent, consisting of Nafion^® solution, between a polymer electrolyte membrane (PEM) and an anode/cathode. The introduced binding agent can provide a better adhesion and stronger binding force between a membrane and an electrode, thereby facilitating a better interfacial contact between the electrode and the Nafion^® membrane, which has been proved by scanning electron microscopy (SEM) analyses to the cross-sectional morphology of the MEA after long-term operation. The cell performance characterization showed the MEA fabricated by the glue method was more stable in cell performance than that fabricated by the conventional hot-pressing method. Cyclic voltammetry (CV) results also demonstrated the MEA fabricated by the glue method exhibited a higher electrochemical surface area (ESA) as a result of the improved interfacial contact between the Nafion^® membrane and the electrodes. Finally, the DMFC with the MEA fabricated by the glue method was characterized by the electrochemical impedance spectroscopy (EIS).     

On the importance of some surface and interface characteristics in the formation of the properties of adhesive joints

The importance of some relative surface characteristics which determines the strength of adhesive joints: specific surface of substrate , relative contact area β and specific contact area β in the adhesion interaction process were emphasised. Existing and potential methods of experimental evaluation of these characteristics were shortly analysed. The durability of the adhesive joints in water media significantly increases with growth of specific surface ^* of chemically treated substrate evaluated from the SEM micrographs. Specific surface calculated from the experimental data of hexane adsorption measurements for iron particles (particulate model of steel substrate) is more then ten times greater than respective ^* values. The relative contact area β of the Al₂O₃ particles (in wide range of ) with PE melt was in a roundabout way evaluated by experimental determination of the affect of on kinetic of peel strength formation of adhesive joints: Al₂O₃ filled PE-steel. The speculation was based on the ability of Al₂O₃ to adsorb low-molecular products of contact oxidation of PE which takes place in the process of formation of adhesive joints and determines their strength. The ability of sorption in its turn is proportional to efficient value of β. The availability of the Al₂O₃ surface was evaluated.     

Fissure evolution and evaluation of pressure-relief gas drainage in the exploitation of super-remote protected seams

Based on nonlinearity contact theory and the geological structure of the Xieqiao Coal Mine in the newly developed Huainan coal field, rock movements, mining fissures and deformation of overlying strata were simulated by using the interface unit of FLAC3D to evaluate the pressure-relief gas drainage in the exploitation of super-remote protected seams. The simulation indicates that the height of the water flowing fractured zone is 54 m in the overlying strata above the protective layer. The maximum relative swelling deformation of the C 13 coal seam is 0.232%,while the mining height is 3.0 m and the distance from the B8 roof to the C13 floor is 129 m, which provides good agreement with a similar experiment and in situ results. The feasibility of exploitation of a super-remote protective coal seam and the performance of the pressure-relief gas drainage in a super-remote protected layer are evaluated by comparisons with practice projects. It demonstrates that the relieved gas in the super-remote protected layers could be better drained and it is feasible to exploit the B8 coal seam before the C13 super-remote protected coal seam. The method is applicable for the study of rock movements, mining fissures and deformation of the overburden, using the interface unit to analyze the contact problems in coal mines.     

Al金属多晶硅纳米膜欧姆接触的制作

利用低压化学气相淀积法（LPCVD）在表面有热氧化二氧化硅的（100）硅衬底上生长80nm厚多晶硅纳米膜,并对其界面进行表征.制作出单层Al金属的欧姆接触样品,在不同退火温度条件下对样片的电阻进行测量.结果表明,退火使欧姆接触的电阻率降低,接触电阻率可达到2.41×10-3Ω.cm2.     

蚯蚓体表与土壤接触界面动态行为仿真

应用离散元软件PFC2D建立了蚯蚓波纹体表与土壤界面动态行为仿真模型,对比分析了光滑和波纹试样的接触界面、接触力场和接触颗粒数以及滑动阻力,得出:当波纹表面的摩擦力与土壤颗粒对波纹凸起处的向后推力之和小于光滑表面的摩擦力时,波纹表面起到减阻作用;如果土壤颗粒对波纹表面凸起处的向后推力过大,波纹会起到增加阻力的作用。另外,试样运动时,波纹表面比光滑表面对土壤的扰动大。随着垂直载荷的增加,波纹表面和光滑表面的滑动阻力均增加,且波纹表面的降阻效果减弱;随着前进速度的增加,2种试样滑动阻力的增加,但波纹表面的滑动阻力的增长小于光滑表面,即速度高时波纹表面降阻明显。结果表明:蚯蚓非光滑表面的减阻能力与接触界面特性和外部条件有关。研究结果可为揭示非光滑表面的减阻机制提供研究方法和参考。     

原色纱亚麻织物麻皮漂白去除方法探讨

在亚麻织物前处理加工过程中较难去除的是亚麻麻皮木质素,针对亚麻织物前处理工艺中亚麻麻皮的漂白或去除难易程度进行了试验,并探讨了原色纱亚麻织物中麻皮木质素漂白或去除适用的加强煮练、氯漂、酸洗等工艺方法.     

改性石英砂的润湿性能研究

对经过改性处理之后的普通石英砂的润湿性能进行了研究。实验采用滴水穿透时间法（WDPT）、酒精溶液入渗法（MED）、接触角测定法三种方法。通过这三种方法来定性和定量地描述其润湿性能。实验结果表明：直接经过酸化处理的石英砂与经过硅烷化处理的石英砂的润湿性能有着明显的改变,前者较普通石英砂表现更为亲水,而后者表现出斥水性。此研究为用石英砂模拟不同润湿性能土壤提供了表面改性方法以及前期的理论准备。     

Mathematical models of grinding manufacture and tooth contact analysis of spherical gears

The spherical gear is a gear-driven mechanism with two degrees of freedom (DOF), which can transfer spatial motion and power. Grinding machining of the spherical gear is performed with a plate grinding wheel by using generating method, and based on mathematical model of the plate grinding wheel, the mathematical model of the spherical gear is set up. And then, the meshing model of a spherical gear pair is developed and the tooth contact analysis (TCA) of the spherical gear pairs is performed. After that, th...