DECOUPLER DESIGN AND CONTROL SYSTEM TUNING BY INA FOR DISTILLATION COMPOSITION CONTROL†

Six distillation column models have been used in studies of the usefulness of the Inverse Nyquist Array (INA) method for design of dual composition control for distillation. Five of the column models are experimental, one describing an industrial column, the others four pilot plants. One column model is obtained by modeling from first principles.

The control strategies investigated and compared are multiloop SISO, 2-way decoupling and l-way decoupling. The control variables are the standard ones, i.e. reflux flow and boilup.

In most of the cases INA has been found to be a useful tool for design of the loops and for comparison of the different control approaches. INA has also been found to be useful for simultaneous tuning of the decouplers and the feedback controllers.

For 2-way decoupling the criterion to minimize interaction at the critical frequency for each primary feedback loop has been found useful in most, but not all, cases. The scheme can be designed by pure gains in the decouplers and there is no reason to introduce dynamics into the decouplers—the systems studied are already sufficiently rich in dynamics.

INA has been found to be a suitable vehicle for the choice between the two possible l-way decoupling schemes.

With the design approach taken, l-way decoupling has been found to provide considerably better control quality than 2-way decoupling in two of the six systems, the differences in control quality being small in the other cases.

The effect of model mismatching on the results, caused e.g. by process nonlinearities, is discussed and simple rules to decrease the parameter sensitivity for 2-way decoupling schemes are given. When model mismatching is considered, the advantage of l-way decoupling over 2-way decoupling seems to increase.

One deficiency of the INA design as used in this paper is that it does not single out the design which is to be preferred on the grounds of robustness.     

Quantum DCS系统及其应用体会

中国联合水泥公司3000t／d熟料生产线电气控制系统采用了法国施耐德公司的Quantum DCS系统，实现对全厂所有设备的工艺操作和控制。全面介绍了QuantumDCS系统的特点、功能系统构成网络，并详细总结了确保该系统稳定可靠运行的使用和维护的经验。     

浅谈一次盐水的工艺指标控制

介绍了一次盐水的各项工艺指标对生产的影响以及稳定控制这些指标的方法，强调了在生产中控制好一次盐水的工艺指标是影响产品质量及离子交换膜使用寿命的关键。     

工业过程的先进控制

在分析工业过程特点的基础上，总结了工业过程先进控制的发展现状，阐述了PID控制器参数整定和模型预测控制的基本概念和内容，讨论了工业过程先进控制的核心内容及其带来的可观的经济效益，并探讨了先进控制软件的产业化问题。     

OCO污水处理工艺在城市污水处理中的应用

介绍OCO工艺及其对城市污水处理的效果。普通城市污水经过该工艺处理之后 ,可以达到我国污水排放标准 ,还可以将所处理的污水经过三级处理之后 ,作为工业用水进行再利用。OCO工艺具有除氮除磷功能强、自动化程度高、运转方式灵活、占地少、出水水质稳定等特点 ,适用于高浓度工矿企业废水和城市生活污水的处理     

世玛3%OF防除春麦田禾本科杂草药效试验

田间试验结果表明，用世玛225ml/hm^2 Genapol LRO 600ml/hm^2,40d对野燕麦（Auena fatua）、多花黑麦草（Lolium multiflorum)鲜重效果分别为88.1%、94.0%。对小麦安全，与对照比增产15.3%。     

高吸水聚合物材料在防沙治沙中的应用

介绍了高吸水聚合物的发展状况、吸水机理和性能特征，总结了合成高吸水聚合物及半合成高吸水聚合物的技术条件及若干种制备方法，并提出利用低成本植物纤维素（取自植物落叶、农作物茎杆等）、淀粉等天然原材料来制备高吸水性聚合物；探讨了以高技术、低成本、大面积可实施及效果显著为技术优势，利用高吸水聚合物进行荒漠和沙漠治理的方法和发展方向。     

锦纶66浸胶帘子布生产中的张力与控制

分析了帘子布生产中张力的作用及各区段的张力情况。张力应根据生产品种及浸胶帘子布的内在质量要求来选择，一般张力设定依据为拉伸区张力是干燥区张力的１倍，定型区张力是拉伸区张力的０．６５倍。同时应控制好各区段的温度，降低拉伸应力使锦纶６６帘子布拉伸均匀，提高帘子布的物理性能。     

低浓度的阴离子洗涤剂实验室内的质量控制

在环境监测中低浓度的阴离子洗涤剂实验室内质量控制应采取以下措施：空白试验值测定，检出限的确定，空白试验的质量控制图，校准曲线的检验，标准样品的测定。     

稻草净防除稻田杂草试验

稻草净亩用５０￣１００克对稻田眼子菜、鸭舌草、甲叶薄等阔叶杂草有很好的防效，并用明显的增产作用。大田移载后１５天一次施药可以控制水稻田整个生育期的阔叶杂草。