进一步降低钼精矿中铜、铅含量的生产实践

分析了钼精矿Cu、Pb含量高的主要原因 ,通过实施一系列措施 ,达到了降低钼精矿中Cu、Pb含量的目的     

江西铜工业存在的问题及对策探讨

简要介绍了我国铜工业概况，重点分析了江西铜工业存在的问题，并提出发展对策，如优化铜产品结构、利用国内外两种资源和大力发展湿法炼铜等。江西要发挥潜在优势，建立我国铜加工材生产基地，利用外力，提高铜加工材的竞争力，由进口替代逐步走向增加出口。     

WC含量对弥散强化铜Cu/WC组织与性能影响的研究

对以WC粒子为第二相的弥散强化铜材料的组织与性能进行了研究。在同样条件下，用机械混料方法制备了不同WC含量的Cu/WC复合材料，分别测定了其密度，电阻率和硬度，结果表明：WC粒子是一种较为理想的弥散相，并且WC体积含量为1.2%时，细小的球形状第二相粒子均匀分布，弥散效果好，材料密度，硬度较高，而电阻率较小，综合性能较好。     

Fire performance of wood (Pinus radiata) treated with fire retardants and a wood preservative

In this work, we co‐formulated an oil‐borne copper naphthenate/permethrin wood preservative system with synthetic polymer‐based fire‐retardant additives prior to the impregnation of Pinus radiata sapwood. We evaluated what effect, if any, the preservative had upon the fire performance properties of the fire retardants and whether the fire retardants impacted on the fungicidal and termiticidal efficacy of the preservative. The fire retardants included halogenated and phosphorus‐based systems. A mass loss calorimeter, in conjunction with a thermopile, was used to measure the time to ignition and the peak heat release rate (PHRR) from which the fire performance index (FPI) was determined. The preservative properties were evaluated using termite and soil‐block decay bioassays. In summary, we found that the rate of fire growth was reduced when the fire retardants were used in combination with the wood preservative. We also found that the PHRR was a better determinant of fire performance than the FPI. The performance of the wood preservative was enhanced against fungal decay and termite attack when used in combination with the fire retardants. The fire retardants also demonstrated some wood preservative properties of their own. Copyright © 2008 John Wiley & Sons, Ltd.     

铜冶炼系统节能降耗与余热利用前景分析

大规模铜冶炼系统的技术改造,可在短期内改变铜厂的面貌,快速提升产品产量,大幅降低铜冶炼的能耗,如何能更深层次地利用好余热资源,是我们研究和发展的方向。     

印制板蚀刻、微蚀刻废液的再生和铜回收的技术及设备

传统的印制板蚀刻废液处理方法存在着工艺落后、操作不便、二次污染、效益不高等问题,本工艺采用特殊的萃取电解、吸附电解技术,使蚀刻废液得以再生循环利用,铜得以100%回收,低含铜废水铜得到98%回收,整个系统不产生二次污染,获得的铜为高纯度铜板,在实现污染控制的同时,废液废水得到了资源化利用。     

应用遥感图像分析九江瑞昌地区构造与金铜成矿的关系

九瑞地区是长江中下游重要的金铜成矿区,遥感图像分析认为,北东东向断裂是主要的控矿构造,与北西向断裂的交汇部位是金铜成矿的有利地段。此外,环形构造又是另外一种控矿构造,目前所发现的金铜矿床均有物化探异常显示,并形成于环形构造的边缘。     

高铅硫化铜精矿的二段焙烧

高铅硫化铜精矿进行湿法铜铅分离时，焙烧过程因有低熔点组份产生，使培砂中铜浸出率仅为73％～82％，达不到工艺要求。经二段焙烧后消除了上述影响，铜浸出率达到97．4％，实现了铜铅分离。     

A review of the linear term in the low-temperature specific heat of La2CuO4 and La2?xMxCuO4 (M = Ba, Ca, Sr)

In this report I will summarize the results of an extensive review of the low-temperature specific heat of the La-based high-temperature superconductors, withT _c between 30 and 40 K, and the related nonsuperconducting compound La₂CuO₄. There have been two previous studies by Fisheret al. [1] and Fischeret al. [2] which also reviewed the low-temperature specific heat of these materials. This work was undertaken to extend a similar study of the 90 K superconductor YBa₂Cu₃O_7– which we recently completed [3]. This review will focus exclusively on the low-temperature specific heat and will update the previous studies by including recent results.     

Advantages of high-field tokamaks for fusion reactor development

High-field designs could reduce the cost and complexity of tokamak reactors. Moreover, the certainty of achieving required plasma performance could be increased. Strong Ohmic heating could eliminate or significantly decrease auxiliary heating power requirements and high values of n_E could be obtained in modest-size plasmas. Other potential advantages are reactor operation at modest values of , capability of higher power density and wall loading, and possibility of operation with advanced fuel mixtures. Present experimental results and basic scaling relations imply that the parameterB ²a, where B is the magnetic field and a is the minor radius, may be of special importance. A superhigh-field compact ignition experiment with very high values ofB ²a (e.g.,B ²a=150 T² m) has the potential of Ohmically heating to ignition. This short-pulse device would use inertially cooled copper plate magnets. Compact engineering test reactor and/or experimental hybrid reactor designs would use steady-state, water-cooled copper magnets and provide long-pulse operation. Design concepts are also described for demonstration/commercial reactors. These devices could use high-field superconducting magnets with 7–10 T at the plasma axis.