EPS与棉花秸秆矿渣复合保温材料研究

在前期石膏、棉花秸秆纤维矿渣等墙体复合材料研究的基础上,通过掺加EPS颗粒研制出一种轻质、隔热、具有一定强度等多功能新型墙体复合材.该材料以EPS颗粒为保温骨料,矿渣为骨料,水泥、石膏为胶凝材料,通过掺加粉碎的棉花秸秆纤维来解决无机、有机材料界面的粘结强度低及EPS颗粒上浮的问题,从而试制出一种性能良好的墙体材料.     

Cellulose furoate. I. Synthesis in homogeneous and heterogeneous systems

Cellulose furoate was synthesized via heterogeneous and homogeneous reactions. Cotton cellulose and wood cellulose were used. Lithium chloride/dimethylacetamide solvent was used to dissolve the cellulose for the homogeneous reaction. The esterification reaction between cellulose and 2‐furoyl chloride was systematically studied. It revealed that the activation of cellulose was important for its esterification reaction. Activation by solvent exchange decreased the crystallinity and increased the accessibility of cellulose. X‐ray diffraction analysis showed no significant change in the spectrogram after activation of cellulose. The degree of substitution of cellulose furoate was influenced by the molecular weight of the cellulose, the stoichiometry of the reagents, the acid scavenger, and the reaction time. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2649–2655, 2001     

Structural change in mercerized cotton fibers on cellulase treatment

Cotton fibers treated with liquid ammonia and sodium hydroxide were hydrolyzed with crude cellulase. The structural change in the fibers due to the cellulase treatment was examined in relation to the apparent affinity of Congo Red. The cellulose III crystalline structure collapsed and generated intermediate‐molecular‐ordered regions on cellulase treatment. Adsorption of Congo Red occurred on the crystallite surfaces of cellulose II and cellulose III that was transformed from cellulose II. The fiber, the dominant crystallite phase of which was cellulose III that was transformed from cellulose II, had a considerably increased apparent affinity after cellulase treatment. The intermediate structure on the crystallite surface was associated with the adsorption of Congo Red in the cases of cellulose II and cellulose III. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1675–1680, 2001     

棉纤维在NMMO溶液中的溶胀与溶解

用不同质量分数的N-甲基吗啉-N-氧化物(NMMO)溶液,在不同的温度和时间条件下,探究棉纤维的溶胀和溶解情况,并利用X射线衍射和红外光谱对纤维素溶胀前后的结构变化进行表征。结果表明:NMMO质量分数低于80%时,棉纤维只溶胀不溶解;在质量分数分别为83%、85%、87%的NMMO溶液中,棉纤维出现溶解现象;随着NMMO质量分数的增大、温度的升高、时间的延长,棉纤维的溶胀程度不断增加。在质量分数为83%的NMMO溶液中,棉纤维先溶胀后溶解;在质量分数为87%的NMMO溶液中,棉纤维不溶胀直接溶解;在质量分数为85%的NMMO溶液中,棉纤维的溶解存在先溶胀后溶解和直接溶解两种形式。质量分数为80%以下的NMMO水溶液处理后的棉纤维,结晶结构和化学结构均没有变化。     

Wet‐driven shape‐memory behaviors and thermal adaptability of cotton knitted fabrics containing crosslinked poly(ethylene glycol) moieties

Cotton knitted fabrics were treated with poly(ethylene glycol) (PEG) in the presence of polyhydric alcohol etherified dimethylol dihydroxy ethylene urea as the crosslinker and magnesium chloride hexahydrate as the catalyst. In wet–dry cycles, the fabrics treated with 30% PEG1500 in the presence of 15% crosslinker and 3% catalyst showed obvious wet‐driven shape‐memory behaviors in terms of a 12% shrinkage rate in the wet state and a 80% shrinkage‐recovery rate in the dry state. The results of weight gain, morphological structures, Fourier transform infrared spectra, and X‐ray diffraction pattern tests confirmed PEG deposits on the surface of the treated fabrics, demonstrated the crosslinking of cotton cellulose with PEG and crosslinker, and also explained the wet‐driven shape‐memory mechanism. The results from differential scanning calorimetry show that the treated fabrics with wet‐driven shape‐memory behaviors had a phase‐change enthalpy and heat‐storage capacity. The crosslinking of cotton cellulose with PEG had a strong influence on the mechanical performance and air permeability of the cotton knitted fabrics. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43473.     

聚氨酯掺杂铜粉涂层的电磁特征及其涂层织物的吸波性能

将掺杂了不同含量微米铜粉的聚氨酯（PU）涂料通过涂层工艺涂敷在棉织物上制成吸波涂层织物,并利用扫描电子显微镜、红外光谱和矢量网络分析仪等测试了不同铜粉含量聚氨酯涂层的介电常数、磁导率和电磁损耗等电磁性能,同时还探讨不同铜粉含量涂料对涂层织物电磁吸收性能的影响。结果表明,在 8~13 GHz 的频段范围内,随着涂层中铜粉含量增加,涂层介电常数实部与虚部均增大,铜粉具有良好的介电性能,在外加电场的作用下产生极化,对电磁波产生介电损耗;铜粉不属于磁损耗材料,对电磁波产生磁损耗较小;当铜粉的含量较低（3 %,质量分数,下同）时,涂层材料的吸波与电磁屏蔽性能较弱,当含量由5 %增加至11 %时,在9.0、10.5、12.8 GHz处反射损耗最低分别为-20.4、-28.3、-25.6 dB,有效吸收带宽分别为0.2、1.3、1.1 GHz,电磁屏蔽效能分别由12.24、16.59、21.1 dB增加至25.92 dB。     

纺织工业原料保障体系的建设

简要介绍了我国棉花、化学纤维、再利用纤维、生物基纤维等纺织原料的发展现状,分析了存在的主要问题,指出必须尽早建立和完善纺织原料保障体系,保障棉花安全供应及生产,加强化纤原料供给保障,建立石油替代战略体系,建立废旧纺织品回收再利用体系,加快实施"走出去"战略,完善期货市场监管体系,加强产业链沟通与协调,才能保证我国纺织工业平稳可持续发展。     

原位复合法制备磁性纤维素纤维及其性能研究

以天然棉纤维为基材,用原位复合法在上沉积磁性Fe3O4纳米粒子,制备出磁性纤维素纤维,利用X射线衍射仪、傅立叶变换红外光谱仪、扫描电子显微镜等方法对所得产物中磁性粒子进行表征。探究了预处理方法以及铁离子（Fe^3＋/Fe^2＋=2）浓度对制得的纤维磁性能的影响,并对磁性纳米粒子与纤维的结合牢度进行了讨论。结果表明：两个因素均会对纤维的磁性能产生影响,当用5%Na OH处理棉纤维原料,在铁离子总浓度为0.10 mol/L（Fe^3＋/Fe^2＋=2）反应时,最有利于磁性纳米颗粒在其表面的沉积,制得棉纤维复合材料的磁性能可以达到11.90 eum/g;经多次洗涤后磁性纤维的磁性能稍有下降,说明磁性纳米粒子对纤维附着力较好,期望被用作功能材料。     

亲水性棉织物的制备

本文采用复合引发体系,以丙烯酰胺(AM)为聚合单体,通过接枝共聚改善棉织物的亲水性,文中探讨了物料配比、反应温度等因素对织物改性效果的影响。实验结果表明:在通氮条件下,复合引发体系为过硫酸铵-尿素体系(质量比为1:2),m(棉织物):m(AM)=1:5,θ=40℃,t=2h,所得棉织物接枝效率为8.10%,吸水性可以提高至75%。对改性后的棉织物的化学结构采用红外光谱进行表征,结果表明,接枝共聚反应顺利发生。     

Thermal calculations on the ignition of a cotton bale by accidental contact with a hot particle

Previously presented ignition data for raw cotton are used in order to make predictions of hazards from hot particle entry into a previously thermally quiescent cotton bale. The calculations make use of a numerical approach to ignition by a heat source.