Corrosion fatigue short crack growth behaviour in a high strength steel

The influence of an aggressive environment (0.6 M, aerated NaCl solution) on short fatigue crack initiation and growth behaviour has been studied. The study involved three major test series, namely: air fatigue, corrosion fatigue, and intermittent air fatigue/corrosion fatigue. The above tests carried out under fully reversed torsional loading conditions at a frequency of 5 Hz, showed that it was the non-metallic inclusions which took part in crack initiation resulting from debonding at metal matrix/inclusion interface and pitting of inclusions in both air and corrosove environments, respectively. Short fatigue crack growth results in these two environments obtained by using plastic replication technique, indicated a large effect of microstructure i.e. prior austenite grain boundaries. The stage/stages at which the environmental contribution was dominant has been discussed by considering the results achieved from intermittent tests. However, the mechanisms involved in corrosion fatigue short crack growth have also been described in the light of results obtained from futher investigations carried out by conducting corrosion fatigue tests under applied cathodic potential conditions and tests on hydrogen pre-charged specimens under air fatigue and uniaxial tension conditions.     

低合金高强度钢的微观组织和疲劳裂纹扩展行为

用透射电镜观察了３０ＣｒＭｎＳｉＮｉ２Ａ钢等温的微观组织，疲劳裂纹扩展行为、裂纹尖端塑性区和位错结构，结果表明，等温状态组织由马氏体和贝氏体组成。在一个奥氏体晶粒内一般存在四个板条领域、裂纹尖端的塑性区内存在主位错带，疲劳断裂的基本组织单元为板条晶或板条束。裂纹遇到板条束界时方向发生较大偏斜。     

On basic definitions of unified fracture mechanics terminology

The adoption of unified fracture mechanics terminology (UFMT) will promote efficient communication between specialists in different fields of fracture research, harmonization of national and international standards relating to fracture mechanics, and last but not least improvement of the existing methodology for teaching and education in fatigue and fracture. In this paper the definitions of some basic and related terms included in different standards on fracture mechanics terminology are confronted with one another. Alternative definitions of the same terms are offered. By this strategy the author tries to show that the definitions of basic and related terms appropriate for the UFMT should emerge as a consequence of harmonizing a crack model with an actual crack and then both taken together with a fracture model, laboratory test methods, and failure assessment codes.Published in Problemy Prochonsti, No. 1, pp. 17–29, January, 1996.This paper is published as a matter of discussion.     

Measurements of Stress Intensity Factors of an Interface Crack Under Mixed Mode Loading

The optical method of caustics has been utilised to measure both the stress intensity factor for a crack lying along the interface of an aluminium/epoxy bimaterial specimen, and the mode mixity arising from the difference in the elastic properties across the interface. Measurements were carried out by using a novel modification to the method whereby caustics are produced and measured from both sides of the specimen, so compensating automatically for the distortion induced in the specimen due to misaligned loading fixtures. A flat reflective surface across the interface was obtained by adhering a reflective coating to the specimen. Verification that this coating does not affect measurement accuracy was obtained by comparing stress intensity factors measured from coated and uncoated monolithic aluminium specimens where good agreement was found to exist between both measurements.     

几种高强度钢腐蚀疲劳裂纹扩展行为的研究

本文研究了ＧＣ－４，３０ＣｒＭｎＳｉＮｉ２Ａ和３００Ｍ超高强钢的腐蚀疲劳裂纹扩展行为。考虑了环境，热处理制度，应力比和频率对裂纹扩展的影响。研究结果表明：腐蚀环境和热处理制度对疲劳裂纹扩展有显著影响。在侵蚀性环境中随频率降低，裂纹扩展大幅度上升，随应力比提高，环境影响加剧。利用扫描电镜对试样断口形貌进行了分析，并讨论了高强钢的腐蚀疲劳机理。     

Object-extending class transformations

Reorganisation and evolution of class hierarchies is important for object-oriented system development and has received considerable attention in the literature. The contributions of this paper are: (1) a formal study of a set of extension relations and transformations on class hierarchies; (2) a presentation of a small set of primitive transformations which form a minimal and complete basis for the extension relations; and (3) an analysis of the impact of these transformations at the object level.The study leads to a better understanding of evolution and reuse of object-oriented software and class hierarchies. It also provides a terminology and a means of classification for design reuse. The theory presented in this paper is based on the Demeter data model, which gives a concise mathematical foundation for classes and their inheritance and part-of relationships. Parts of the theory have been implemented in the Demeter System ^TM C++, a CASE tool for object-oriented design and programming.     

13SiMnNiCrMoV钢切口疲劳裂纹萌生门槛值

本文研究在13SiMnNiCrMoV 结构钢中用尖裂纹的应力强度因子来反映三点弯曲缺口试样的疲劳裂纹萌生规律。当 R=0.1,f=100Hz,试样尺寸 B×W×L=12.5×25×117mm 时,缺口名义应力幅的门槛值为Δσ_(th)=3315ρ~(0.352) MPa,0.5mm≤ρ≤5mmΔK_(th)=250ρ~(0.352) MPam~(1/2)门槛值与ρ有关。同时得到缺口裂纹萌生的循环次数 N_i 与名义应力幅Δσ、缺口曲率半径ρ的定量关系是N_i=3.98×10~(22)ρ~(1.62)/Δσ~(4.85),N_i≤10~(5.5)并讨论了(ΔK_1/ρ~(1/2))_(th)与ρ无关的结论。     

Application of Differential Evolution for Irrigation Planning: An Indian Case Study

The present paper demonstrates the applicability of population based search optimization method, namely, Differential Evolution (DE) to a case study of Mahi Bajaj Sagar Project (MBSP), India. Ten different strategies of DE are employed to assess the ability of DE for solving higher dimensional problems as an alternative methodology for irrigation planning. The parameters considered in DE are population size, crossover constant and weighting factor. Linear Programming (LP) is utilized as a comparative approach to assess the ability of DE. Comparison of results of LP and the 10 DE strategies for the given parameters indicated that both the results are comparable even for high dimensional problems. Extensive sensitivity analysis studies, performed for 3,600 combinations of above parameters for the 10 DE strategies suggested that DE/rand-to-best/1/bin strategy is the best strategy giving maximum benefits taking minimum CPU time. It is concluded that DE can be utilized for efficient planning of any irrigation system with suitable modifications.     

X-ray microtomography: Application to microstructure analysis of a cementitious material during leaching process

Leaching of cementitious materials leads to an increase in porosity, which has important consequences on transport and mechanical properties. The present study outlines the characterization of microstructural evolution in a mortar subjected to a chemical attack, by means of a powerful non-intrusive experimental method, namely synchrotron X-ray computed microtomography. This innovative method is used to measure the variation of porosity in a leached mortar. Having described the effects of leaching in mortar (influences on microstructure and on mechanical properties), we present the accelerated leaching process and the microtomographic analysis that have been used to monitor it. We then investigate the capacity of this method to quantify the evolution of porosity during the leaching process. The method is validated by comparison of the results obtained with data available in the literature.     

沁水盆地北端煤层气储层特征及富集机制

煤层气的富集与储层特征密切相关,并受地质条件的制约。在详细研究煤储层特征及煤层气富集机制的基础上,对沁水盆地北端煤层气的开发前景进行了初步评价。煤岩、煤质、煤体结构及孔渗性、吸附性的观察和测试显示,该区煤层厚度大,热演化程度高,局部发育构造煤,裂隙较发育,吸附性能力强,含气量高,含气饱和度偏低,适合煤层气的开发。该区煤层气的富集主要受控于热演化史和埋藏史。在区域变质的背景上,叠加了岩浆热变质作用,生气强度大。另外,煤层的埋深、顶底板封闭性及水文地质条件都会影响煤层含气量的大小,煤层气富集是多因素有效配置的结果。