体外CFRP筋预应力混凝土箱梁长期受力性能试验研究

碳纤维(CFRP)筋具有优异的物理力学性能,可用于替代传统的预应力钢筋。制作了体外配置碳纤维筋预应力混凝土箱梁模型,对持续均布荷载作用箱梁的截面应力重分布、长期挠曲变形及裂缝发展等规律进行了1001 d的试验观测。基于素混凝土柱体的实测徐变系数,运用双线性法和曲率法分别对试验箱梁的长期挠曲变形进行预测。试验结果表明:受压钢筋应变较初值增长225%～268%,受拉钢筋的应变较初值增长36.2～38.6%,混凝土表面压应变较初值增长164%～224%。按现行设计规范计算长期荷载作用特征裂缝宽度较实测值偏小11.8%～55.5%。跨中长期挠曲变形实测值为初始变形的2.32～2.42倍,较现行设计规范取值偏大18.5%。     

Service Reliability Assessment of Weld Repaired CrMoV Steel Rotors

This research deals with the service evaluation of a retired CrMoV steel rotor that has been repaired using deep groove multi‐pass submerged arc welding (SAW) and gas tungsten arc welding (GTAW). Accelerated creep tests were conducted at several elevated temperatures and extrapolated to the service temperatures. The coalescence of carbides and cavity growth during creep were evaluated. For the CrMoV‐GTAW samples, it was found that the creep life depended on the location of the crossweld in the welded specimen. The service lives of the weldments were extrapolated.     

Response time variability

Response time variability is a new optimization problem with a broad range of applications and a distinctive number of theoretic flavour. The problem occurs whenever events, jobs, clients or products need to be sequenced so as to minimize the variability of time for which they wait for the next turn in obtaining the resources necessary for their advance. The problem has numerous real-life applications. We study its computational complexity, present efficiency, polynomial time algorithms for some cases, and the NP-hardness proof for a general problem. We propose a position exchange heuristic and apply it to improve the total response time variability of an initial sequence. The latter is the optimum bottleneck sequence, Webster or Jefferson sequence of the apportionment, or a random sequence. We report on computational experiments with the heuristic.     

Effect of Microstructure on the Accelerated Creep of 20CrMoV12‐1 and P 91 Steels

In the initial part the change of microstructure for steel X20 CrMoV 121 is discussed in terms of the distribution of carbide precipitates and its effects on accelerated creep resistance and hardness are presented. In the following, experimental results of microstructure and accelerated creep resistance are presented for the steels X20CrMoV 121 and P91 annealed for up to 8760 hours at 650°C and 750°C before the testing. A similar evolution of the distribution of carbide particles of a size above 102 nm is found for both steels, while the accelerated creep resistance is diminished much stronger for the steel X20CrMoV 121. This difference is due to a greater stability of NbC than that of VC precipitates, both related to the evolution of the chemical composition of complex chromium, molybdenum and iron carbide particles.     

热塑性塑料管材抗蠕变性能评价

描述了热塑性塑料管材的抗蠕变性及其有关的评价方法，介绍了几种标准测试方法。     

Air entrainment in fresh concrete with PFA

The results of a study into the influence of PFA on air entrainment in fresh concrete are discussed It is shown that the required dosage of AEA to produce an air content of 5.5 ± 0.5% in a PFA modified concrete mix is two-six times that required in the corresponding neat OPC concrete mix. The dosage of a vinsol based air entraining agent (AEA) required appears to be directly related to the PFA content of the mix. Similar direct relationships were obtained with a range of different PFAs. The dosage of an AEA based on the salt of a fatty acid appears to be sensitive to both PFA and OPC contents. For the type of PFA used, the variability of measured air content or the amount of air retained after continued agitation both indicated that vinsol based AEAs show the highest variability whilst fatty acid based AEAs show low variability. The between batch variability of air content was significantly improved by the addition of PFA regardless of the AEA used.     

CAE技术在汽轮机高温强度计算中的应用

为分析某百万千瓦超超临界汽轮机高压缸旋转部件在高温以及高离心力载荷下的强度状况,建立高压缸第一级动叶片的模型.根据蠕变试验数据,采用最小二乘法拟合幂蠕变方程中的各个参数,并详细介绍各参数的拟合、优化和验算过程;用CFD分析软件计算流体域内的对流传热系数并插值到有限元计算程序中,分析叶根倒角处危险区域的蠕变应力状况.数据验算结果表明,利用拟合数据计算得到的蠕变应力值与试验值比较接近,证明该方法可靠;CAE计算结果表明,叶根倒角处危险区域蠕变应力考核合格,并且有充足的安全裕量.     

铸造镍基高温合金的蠕变阻力

在对颗粒强化理论和位错蠕变理论进行回顾、评价基础上，发展了一个位错蠕变阻力模型，认为蠕变阻力是影响铸造镍基高温合金蠕变机制的重要因素。当施加应力足以使位错切入γ′相时，主要蠕变机制是位错切割γ′相过程，蠕变阻力就是位错切入γ′相的临界门槛应力。在低施加应力区，位错只能借助于热激活攀移过程通过γ′相。蠕变阻力包括两部分：第一项是位错攀移临界门槛应力，与施加应力无关；第二项是与施加应力有关的阻力项，代表了其他强化机制的贡献。位错攀移机制蠕变阻力的上限是切割机制门槛应力。在3种铸造镍基高温合金中（定向凝固DZ17G合金，IN100合金和IN738合金），对上述模型进行了验证，理论计算应用了SL强化理论，与实测值符合较好。     

CREEP BEHAVIORS OF Pt-RE ALLOYS AT HIGH TEMPERATURES

The creep behaviors of Pt-RE alloys have been studied at 1200℃ and 1400℃.The results show that asmall amount of RE elements improves the creep behaviors of platinum greatly.The creep behaviors of PtGd0.5,PtLa0.5 and PtLa0.3 Gd0.2,are best among all the alloys studied.As far as the creep behaviors are concerned,the traditional heat-resistance alloy PtGd10 can be replaced by PtGd0.5.Particularly,the properities of PtGd0.5are near to those of PtRb10.For most of the Pt-RE alloys,long-time,static,super high-temperature treatment inair is of no advantage to the creep rupture life.The mechanisms of the effects of rare-earths on high-temperaturecreep properties of platinum are discussed.