Fabrication of YAG transparent ceramics by two-step sintering

Yttrium aluminum garnet (YAG) nanopowders with mean particle size of about 50 nm synthesized by a modified co-precipitation method were used to sinter bulk YAG ceramic by two-step sintering method. Full densification was achieved by heating the sample up to 1800 °C followed by holding at 1550 °C for 10 h. Transparent YAG ceramics were obtained by suppressing grain-boundary migration while promoting grain-boundary diffusion during the two-step sintering process. The microstructure of the YAG ceramic is homogeneous without abnormal grain growth and the transmittance of the sintered sample is 43%.     

16MnR钢高温疲劳裂纹扩展行为试验研究

对16MnR钢在常温、150℃、300℃和425℃下的疲劳裂纹扩展速率进行了测试和分析,得到了四种温度下的疲劳裂纹扩展规律。结果表明：该材料在150℃和300℃的疲劳裂纹扩展速率比常温和425℃时低,425℃时疲劳裂纹扩展速率最高。     

Ce:LuAlO3晶体的热稳定性研究

铈掺杂铝酸镥(Ce:LuAlO3)晶体是一种具有钙钛矿结构的新型无机闪烁体.用提拉法试图从n(Lu2O3):n(Al2O3)=1:1的熔体中生长Ce:LuAlO3晶体.实验表明:在缓慢结晶条件下得到的不是Ce:LuAlO3晶体,而是镥铝石榴石[Lu3Al2(AlO4)3].只有急速降温才能够获得Ce:LuAlO3晶体.退火和差热分析表明:Ce:LuAlO3晶体只存在于高温条件下,当温度下降时,它会分解成Lu3Al2(AlO4)3,Lu4Al 2O9和Lu2O3.造成LuAlO3晶体在低温下结构不稳定的原因是Lu离子的半径太小,它只适应于配位数是8的石榴石结构,只有在高温下才能适应配位数是12的钙钛矿结构.     

机械激活法合成Al2TiO5粉体中的各向异性生长

采用高能球磨处理方式对合成Al2TiO5的原料混合体系进行高球料比的机械激活处理,在相对低温和短时条件下制备了高纯度Al2TiO5粉体,并使得其各向异性生长特性得以体现,其典型结构特征为棒状晶粒。分析讨论了机械激活过程促进Al2TiO5晶粒各向异性生长的作用及原因。     

Recent progress of crystal growth modeling and growth control

With the rapid growth of electronic and optoelectronic industry, the demand for crystal materials increased dramatically for the past two decades. The requirement for better, cheaper, and larger single crystals has driven extensive research and development in crystal growth. To understand the interplay of associated transport processes and phase transformation, as well as to provide a design basis, crystal growth modeling is becoming more important in both fundamentals and practice. In this article, we review some recent progress of numerical modeling in crystal growth through three subjects: (1) hot-zone design, (2) active growth control, and (3) morphological simulation. Examples are given through our research results in recent years. For better illustration and process understanding some visualization results using transparent materials are given. The needs and the challenges ahead for crystal growth modeling are also discussed.     

In situ X-ray diffraction study of a TiO2 nanopowder Spark Plasma Sintering under very high pressure

We investigated the effect of very high pressure on the sintering temperature, phase transition and the grain growth during Spark Plasma Sintering (SPS) of a 15 nm TiO₂ nanopowder. Using in situ synchrotron X-ray diffraction during sintering at 1.5 and 3.5 GPa, we followed the evolution of the crystalline phases and the crystallite size as a function of temperature. In comparison, in the laboratory, SPS experiments were performed on two original facilities: A Paris-Edinburgh press and a high-pressure module adapted to standard SPS equipment. We studied the effect of the pressure on the sintering in the range 76 MPa to 3.5 GPa. We have shown that highly dense nanostructured ceramics can be prepared under very high pressure at low sintering temperatures. At 1 GPa, we limited the grain growth to an average size of 233 nm by heating at only 560 °C, and achieved a relative density of 98 %.     

耐溶剂复合纳滤膜的研究进展

耐溶剂纳滤是一种新型的膜分离技术,用于有机混合物的分离。商品耐溶剂纳滤膜大多是采用相转化法制备的整体皮层非对称膜,膜皮层较厚,通量较低。耐溶剂复合纳滤膜由基膜和分离层组成,具有薄皮层、高溶剂通量和高溶质截留率的优点。耐溶剂复合纳滤膜的制备与改性也因此成为近年来的研究热点。本文从界面聚合、表面涂覆、层层自组装、原位生长、有机-无机杂化和表面改性六个方面介绍耐溶剂复合纳滤膜的研究进展,最后对其发展前景进行展望。     

LDH@MMT/MZBMSO的制备及其在皮革中的阻燃性能

采用水热法在蒙脱土（MMT）表面原位生长层状双氢氧化物（LDH），获得了层状双氢氧化物@蒙脱土（LDH@MMT）。通过XRD、SEM、FTIR对LDH@MMT进行了表征。结果表明，LDH和MMT通过氢键复合在一起，呈花状结构。将其引入花椒籽油（ZBMSO）中制得层状双氢氧化物@蒙脱土/改性花椒籽油（LDH@MMT/MZBMSO），TEM结果表明：LDH@MMT均匀分散在MZBMSO中。将其应用于皮革加脂工艺，结果表明：与MZBMSO加脂坯革相比，当LDH@MMT的质量占ZBMSO的12%时，LDH@MMT/MZBMSO加脂坯革阻燃性能明显提高，加脂坯革氧指数由22.8%提升至28.3%，有焰燃烧时间由87 s减少到43 s，热释放速率降低了43.6%，总热释放速率降低了73.6%，产烟速率降低了63.5%；LDH@MMT包裹在坯革纤维表面，形成的“曲折路径”可减缓热量及烟气的释放，燃烧后在纤维表面形成致密碳层进一步阻隔坯革燃烧过程中释放的热量、烟气，并隔绝氧气，从而提升了加脂坯革的阻燃抑烟性能。     

塞来昔布对鼻咽癌细胞株HNE-1增殖与侵袭能力、VEGF表达及放疗敏感性的影响

目的探讨环氧化酶-2(COX-2)选择性抑制剂塞来昔布(Celecoxib)对鼻咽癌细胞株HNE-1增殖与侵袭能力、血管内皮生长因子(VEGF)表达及放疗敏感性的影响。方法HNE-1细胞经不同浓度塞来昔布处理后,采用MTT法检测各组细胞的增殖水平,细胞侵袭试验检测细胞的侵袭转移能力,RT-PCR及ELISA分别检测细胞VEGF mRNA的转录水平及蛋白的表达水平,克隆形成试验检测细胞对放疗的敏感性。结果不同浓度的塞来昔布均可显著抑制HNE-1细胞的增殖与侵袭能力,并显著下调HNE-1细胞VEGF在mRNA及蛋白水平的表达,且均呈剂量依赖性,差异具有统计学意义。克隆形成试验结果表明,125μmol/L的塞来昔布与放疗联用对HNE-1细胞有明显的协同抗肿瘤效应。结论塞来昔布对HNE-1细胞的增殖与侵袭能力及VEGF的表达均有明显的抑制作用;经塞来昔布处理可增强HNE-1细胞对放疗的敏感性。